• Journal of the Korean Wood Science and Technology
• /
• 제21권1호
• /
• pp.51-58
• /
• 1993

The phenol resorcinol formaldehyde resin (PRF) adhesives which are curing at ambient temperature for structural purposes were synthesized. A PRF resin is produced according to the two-stage reaction system. In first stage, a low-condensed resol or methylolated phenol were prepared from phenol by reaction with a formaldehyde in alkaline condition. The molar ratio of phenol to formaldehyde was 1.0~1.4. And in second-stage, resorcinol was added to combine with the methylol group of a low-condensed resol(R/P molar ratio 0.3). The glue-joint strength, pot-life and workability of this synthetic PRF resin were superior to conventional ambient temperature setting adhesives such as oilic urethane or water based polymer-isocyanate resin for wood adhesives.

• Journal of the Korean Wood Science and Technology
• /
• 제42권3호
• /
• pp.339-345
• /
• 2014

집성재의 생산성 향상을 위한 고주파 가열 경화기술에 대해 연구하였다. 고주파가 유전체에 가해지면 내부에서 에너지 손실에 의한 발열이 발생한다. 집성재를 구성하는 라미나와 접착제는 유전체이므로 집성재에 고주파를 주사하면 내부에서 발열이 발생한다. 집성재 제조에 이용되는 대부분의 상온 경화형 접착제는 고온에서 빠른 경화가 이루어지므로 고주파 가열 기술을 이용하면 집성재 내부 접착층의 온도를 상승시킴으로써 빠른 경화를 유도할 수 있다. 본 연구에서는 낙엽송재와 phenol-resorcinol-formaldehyde (PRF) 접착제의 유전 특성을 평가하고, 집성재 내부의 접착층의 빠른 경화를 유도하는 고주파 가열 경화 기작을 이론적으로 분석하였다. 연구 결과, 온도상승인자인 PRF 접착제의 상대손실계수가 낙엽송재의 상대손실계수에 비해 높았으나, 온도상승저해인자인 밀도와 비열도 높았다. 그러나 상대손실계수의 비율이 온도상승저해인자의 비율보다 높기 때문에 고주파 가열에 의한 발열량은 접착제에서 더 높을 것으로 예상된다. 이러한 실험 결과를 이용한 이론적 접근을 바탕으로, 접착층이 목표온도까지 상승하기 위한 ISM 영역의 고주파 주파수 별 전기장의 상대 세기를 추정하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권3호
• /
• pp.253-264
• /
• 2019

This study characterized the chemical compounds in tannin from mangium (Acacia mangium) bark extract and determined the physical-mechanical properties of glued laminated timber (glulam) made from sengon (Falcataria moluccana), jabon (Anthocephalus cadamba), and mangium wood. The adhesives used to prepare the glulam were based on mangium tannin and phenol resorcinol formaldehyde resin. Five-layer glulam beams measuring $5cm{\times}6cm{\times}120cm$ in thickness, width, and length, respectively, were made with a glue spread of $280g/m^2$ for each glue line, cold pressing at $10.5kgf/cm^2$ for 4 h and clamping for 20 h. Condensed mangium tannin consisted of 49.08% phenolic compounds with an average molecular weight of 4745. The degree of crystallinity was 14.8%. The Stiasny number was 47.22%. The density and the moisture content of the glulams differed from those of the corresponding solid woods with mangium having the lowest moisture content (9.58%) and the highest density ($0.66g/cm^3$). The modulus of rupture for all glulam beams met the JAS 234-2003 standard but the modulus of elasticity and the shear strength values did not. Glulam beams made with tannin had high delamination under dry and wet conditions, but glulam made from sengon and jabon wood met the standard's requirements. All glulam beams had low formaldehyde emissions and were classified as $F^{****}$ for formaldehyde emissions according to the JAS 234 (2003) standard.

• Journal of the Korean Wood Science and Technology
• /
• 제43권5호
• /
• pp.682-690
• /
• 2015

The bonding performance of two types of wood adhesives, namely phenol-resorcinol-formaldehyde (PRF) resin and melamine-urea-formaldehyde (MUF) resin for glued laminated timber manufactured by high frequency (HF) heating was evaluated. The HF heating system consists of HF oscillator with dielectric heating system for curing adhesives, and hydraulic press system for clamping glued laminated timber. The designed frequency and output power of the HF system was as 5 MHz and 60 kW, respectively. To verify dielectric heating mechanism under HF oscillation, the heat loss factors of laminae and adhesives were measured. The results show that it is possible to selectively heat adhesives for their curing due to the remarkably higher loss factor of the adhesives than those of wood laminae. The temperature of adhesive in the bonding line reached up to the set temperature within a few seconds by high frequency oscillating, which advanced the curing of adhesive afterwards. The bonding performance, such as shear strength of bonding line, water soaking delamination, and boiling water soaking delamination of PRF resin met the requirement of Korean Standard (KS), however the MUF resin did not meet the KS requirement of boiling water soaking delamination. These results indicate that the HF heating system is successful to manufacture glued laminated timbers with PRF resins to meet the bonding requirements.

• Journal of the Korean Wood Science and Technology
• /
• 제51권1호
• /
• pp.14-22
• /
• 2023

Economical use of larix (larch) boards (grade 3) in industries is lower than that of imported hardwood; thus, studies have been conducted toward performance improvement of larix boards. Herein, flexural modulus of larix board samples laminated with wood adhesives polyurethane resins, poly (vinyl acetate) resins, phenol-resorcinol-formaldehyde resins, melamine-formaldehyde resins, and urea-formaldehyde resins was compared with that of the samples bonded with adhesives reinforced with mesh-type basalt fibers. Moreover, the flexural moduli of the laminated samples bonded by mesh-type basalt fibers were compared with those of reinforced samples. The results showed that boards laminated with polyurethane and urea-formaldehyde resin adhesives had higher flexural modulus than those without the lamination. In particular, the increase in the flexural modulus was relatively significant for the 2- and 3-ply board structures laminated with polyurethane adhesives compared to those with reinforcement. The 3-ply board structure without reinforcement had the highest flexural modulus when the urea-formaldehyde resin adhesive was used.

• Journal of the Korean Wood Science and Technology
• /
• 제51권2호
• /
• pp.81-97
• /
• 2023

The aim of this study were to evaluate tannin resorcinol formaldehyde (TRF) for the preparation of cross-laminated timbers (CLTs) made from fast-growing tree species and to analyze the physical and mechanical properties of CLTs. TRF copolymer resin was prepared by using the bark extracts of Swietenia mahagoni (L.) Jacq. It was observed that the TRF adhesive possessed less solid content (23.59%), high viscosity (11.35 poise), and high pH values (10.0) compared to the standard phenol resorcinol formaldehyde. The TRF adhesive was applied to produce CLTs with the addition of 15% tapioca and flour as an extender. The six-layered CLTs were produced from sengon (Falcataria moluccana Miq.), jabon [Anthocephalus cadamba (Roxb) Miq.], coconut (Cocos nucifera L.), and the combination of coconut-jabon and coconut-sengon wood. The analysis of variance revealed that the layer composition of CLT significantly affected the physical and mechanical properties of the beam. While the modulus of rupture met the standard, the moisture content and modulus of elasticity values did not fulfill JAS 1152-2007. All of the CLTs produced in this study demonstrated low formaldehyde emission, ranging from 0.001 mg/L to 0.003 mg/L, thereby satisfying the JAS 1152 for structural glue laminated timber.

• Journal of the Korean Wood Science and Technology
• /
• 제45권3호
• /
• pp.243-249
• /
• 2017

본 연구는 국산 잣나무를 활용한 구조용집성판(cross laminated timber; CLT) 제조 기술 확립을 위한 일환으로 구조 용집성판 제작 시 접착조건을 구명하기 위해 수행되었다. 페놀레조시놀공축합수지(phenol resorcinol formaldehyde; PRF) 접착제를 적용하여 도포량과 압체압력 조건을 달리하여 목리가 수직 또는 수평한 경우의 전단시험에 의해 접착 강도를 확인하였다. 실험결과, 적정 접착조건은 도포량 $250g/m^2$, 압체압력 0.8 MPa로 결정하였다. 목리방향별 접착력에 있어서는 목리를 수직방향으로 접착할 때 평행하게 접착된 경우보다 낮은 값을 보였다. 이는 목리를 수직방향으로 접착한 시험편의 경우 다수가 롤링전단에 의해 파괴된 것과 연관이 있는 것으로 판단되었다. 한편 목리가 수평한 방향으로 접착된 경우, 국내외 기준에서 제시하고 있는 전단접착 강도 기준을 만족하였으며 목리가 수직한 방향으로 접착한 경우 국외 기준에 제시된 기준을 만족하였다. 본 연구에서 도출된 최적 접착조건을 적용하여 국산 잣나무 구조용집성판 제조 시 국내외 기준에 준하는 접착성능 확보가 가능할 것이며, 또한 도출 데이터는 구조용집성판 및 구조용집성재 제조 시 참고 데이터로 활용될 수 있을 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제33권5호통권133호
• /
• pp.57-65
• /
• 2005

Following our previous reports for finger-jointed woods with various finger profiles studied for the efficient use of small diameter logs and woods containing various defects, twelve types of finger-jointed woods glued with three kinds of adhesives and with two sizes of finger pitches were made with sitka spruce and red pine. The effects of the adhesives and finger pitches on bending creep performances of finger-jointed woods were investigated. The shape of creep curves differed among the used adhesives and finger pitches of finger-jointed woods for both tested species. Their creep curves showed a linear behavior beyond about one hour, and the N values fitted to power law increased with increasing finger pitches. The initial deformation increased with increasing finger pitches, regardless of the tested species and kinds of adhesives, whereas the effect of finger pitches on the creep deformation was not clear. For finger-jointed woods glued with polyvinyl acetate (PVAc) resin, creep failure occurred in 106 hours after the load was applied. And the difference of the creep compliance between finger-jointed woods glued with resorcinol-phenol formaldehyde (RPF) resin and aqueous vinyl urethane (AVU) resin was small. The ratios for creep performances of finger-jointed woods glued with RPF resin and AVU resin versus solid wood were higher in creep deformation than initial deformation for both species, and the difference between both adhesives was not found. The relative creep decreased with increasing finger pitches, and the marked differences was not found between RPF resin and AVU resin.

• Journal of the Korean Wood Science and Technology
• /
• 제32권6호
• /
• pp.57-66
• /
• 2004

To study the efficient usage of small diameter logs and woods containing defects such as knots, slope of the grain and decay, six types of finger-jointed woods with various finger profiles were made of poplar, pine and oak with different density. We investigated the effect of finger profile on static bending strength performances of finger-jointed woods. The efficiency of bending MOE, MOR and deflection showed the highest value in poplar finger-jointed wood with the lowest density of three species, and the lowest value in oak finger-jointed wood with the highest density of three species. The values markedly decreased with increasing finger pitch for finger-jointed wood glued with polyvinyl acetate (PVAc) resin for all tested species, whereas for the finger-jointed wood glued with resorcinol-phenol formaldehyde (RPF) resin, the influence of finger pitch on the efficiency of MOE was not found in all tested species, and those on the efficiency of MOR and deflection indicated the same trend as finger-jointed wood glued with PVAc resin in the case of pine and oak finger-jointed wood with higher densities. It was found that the values tended to decrease with increasing density of species on the whole and the desirable finger pitches were L (6.8 mm) for poplar, M (4.4 mm) for pine and S (3.5 mm) for oak in a view of economy. For finger-jointed wood glued with PVAc resin, the fitness between a tip and a root width of a pair of fingers δ of 0.5 mm indicated the highest efficiency of MOE for all species. And, the influence of δ on MOR was only found in oak finger-jointed wood glued with RPF resin and the desirable δ value for oak was 0.1 mm. However, it was found that the influence of δ on the strength performance was very small.