• Korean Chemical Engineering Research
• /
• 제55권2호
• /
• pp.220-224
• /
• 2017

본 논문에서는 전기절연판이나 접착제로 널리 사용되는 페놀수지를 초임계 유체를 이용하여 카본입자로 재활용 하는방법을 연구 하였다. 폐페놀수지는 불융/불용 특성으로 대부분 매립하거나 소각처리하고 있으며, 환경오염 방지차원에서 페놀수지의 새로운 재활용 기술 개발이 매우 필요한 실정이다. 폐페놀수지를 재활용하기 위해 다양한 아/초임계 용매(에탄올, 아세톤, 물, 메탄올)를 선정하여 처리하였다. 그 결과 기존의 카본입자의 제조 방법들 보다 훨씬 낮은 온도 조건($350{\sim}380^{\circ}C$)에서 카본입자를 제조할 수 있었다. 본 연구에서는 재활용된 카본입자의 FT-IR, XRD, TGA, SEM, EDS 분석을 통하여 반응용매에 따른 카본입자의 특성을 고찰하였으며, 모든 용매에 대해 동일한 화학구조 및 비정질 구조를 가지는 카본입자를 제조 할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제26권2호
• /
• pp.6-15
• /
• 1998

A total of forty five-ply, 30- by 30-cm lauan and larch plywood sheets were manufactured in the laboratory using commercial urea and phenol resin adhesives; half of these sheets were treated with fresh concrete. Each sheet was carbonized for 2, 4, and 6hours at $400^{\circ}C$, $600^{\circ}C$, and $750^{\circ}C$, respectively, and their physical properties were measured. The yie1d of charcoal decreased as carbonization temperature and time increased. Charcoal yield was greater in plywood than in veneer, and slightly greater in plywood treated with concrete compared to untreated plywood. Plywood manufactured with phenol resin adhesive had higher pH, higher equilibrium moisture content (EMC), and greater adsorption of methylene-blue dye compared to plywood manufactured with urea resin. For concrete-treated plywood, pH was greater than 10 even when the sheets were carbonized for 2hours at $400^{\circ}C$. Although the EMC of the phenol resin plywood was higher than that of the urea resin plywood, EMC of the phenol resin was lower than that of the urea resin. The larch phenol resin plywood that was carbonized for 6 hours at $750^{\circ}C$ adsorbed more methylene-blue than did the commercia1 wood-based activated charcoal as a result of total pore volume and surface area.

• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.27-33
• /
• 2016

페놀수지는 열경화성 수지로서 우수한 내열성 및 기계적 물성을 가지고 있다. 하지만 열경화 특성으로 인해 사용 후 재활용이 어렵고, 전체 생산량의 15~20%가 스프루와 런너 형태로 폐기되고 있다. 4만 톤의 페놀수지 스프루와 런너가 버려지고 있으며 폐기된 페놀 스프루와 런너 처리비용은 연간 200억원으로 추정된다. 본 실험에서는 폐기되는 스프루와 런너를 분쇄하고 폴리에틸렌과의 표면접착력 향상을 위해 실란 표면처리를 하였다. 분쇄된 입자의 크기는 100~1000um의 분체와 1~100um의 미분으로 나누어 실험하였다. 분쇄된 페놀은 실란 작용기에 따른 특성을 평가하기 위해 3-(Methacryloyloxy) propyltrimethoxysilane 과 Vinyltrimethoxy silane으로 처리되었다. 입자의 크기를 분석하기 위해 입도분석기를 사용였다. 열적 특성은 DSC(Differential Scanning Calorimetry)와 HDT(heat deflection temperature)를 통하여 분석하였다. 기계적 물성의 측정은 UTM(universal testing machine)과 notched izod impact tester로 평가하였다. 전처리한 페놀수지 파우더를 첨가시, 고밀도 폴리에틸렌(HDPE)의 열변형온도가 $77^{\circ}C$에서 최대 $96^{\circ}C$까지 향상되었으며, 결정화도와 결정화 온도가 증가하였다. 결론적으로, 실란 전처리 하지 않았을 경우와 비교했을 때 충격강도는 50%가 인장강도는 20%가 상승하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권2호
• /
• pp.15-19
• /
• 1996

To utilize the waste materials and develope wood adhesive from isolated bloods of slaughtered cow and pig and also to prevent water pollution, simple and rapid method of isolation and purification of plasma proteins from pig bloods with trichloroacetic acid(TCA) treatment was developed. Adding of TCA-precipitated blood powder to the phenol formaldehyde resin(PF) improved dry and wet strength of plywood and resulted in fast hot pressing times.

• Journal of the Korean Wood Science and Technology
• /
• 제31권6호
• /
• pp.83-88
• /
• 2003

The woodceramics are porous amorphous carbon and glassy carbon composite materials. Woodceramics attracted a lot of attention in recent years because they are environmentally friendly and because of their unique functional characteristics such as catalysis, moisture absorption, deodorization, purification, carrier for microbial activity, specific stiffness, corrosion and friction resistance, and their electromagnetic shielding capacity. In this paper, we made new products of clay-woodceramics to investigate the industrial analysis and ethylene gas adsorption for basic data of building- and packging- materials keeping fruit fresh for a long time. Clay-woodceramics were carbonized for 3 h of heating in a special furnace under a gas flow of nitrogen(15 ml/min.) from 3 layers-clay-woodparticleboard made from pallet waste wood, phenol- formaldehyde resin(hereafter PF, Non volatile content:52%, resin content 30%), and clay(10%, 20% and 30%). Carbonization temperature was 400℃, 600℃ and 800℃. Experimental results shows that the higher the carbonization temperature, the higher the fixed carbon and the lower the volatile contents. The higher the clay content, the more the ash content. The higher the carbonization temperature, the more the ethylene gas adsorption. Carbonization temperature of 800℃ gave the best reslts as same as that of white charcoal and activated carbon.(800℃-clay-woodceramic: 5.36 ppm, white charcoal: 5.66 ppm, activated carbon: 5.79 ppm) The clay contents did not make difference of ethylene gas adsoption.

• 한국포장학회지
• /
• 제11권1호
• /
• pp.33-40
• /
• 2005

This study was carried out for effective utilization of recycling resources to investigate the repulping conditions of car air filter waste paper and to evaluate the application into corrugating medium papermaking by blending these repulped pulps. Car air filter waste paper was made of virgin BKP and it was dipped into phenol resin solution. It was well disintegrated by laboratory Valley beater with 10%(basis on oven-dried pulp weight) NaOH addition and defoamer usage. The optimal temperature, beating consistency and treatment time were mainly $40^{\circ}C$, 1% and $30{\sim}40$ minutes, respectively. Handsheets were prepared with various blending ratios between air filter recycled pulp and KOCC. In the case of $10{\sim}20%$ substitution with air filter recycled pulp, physical properties reductions as compressive strength and burst strength of sheets were lower than others. These results showed more favour than the partial substitution of KOCC for corrugating medium even though some strength reduction of paper. It was also observed that the waste water of air filter recycling was not affective to environmental problems.

• 한국환경농학회지
• /
• 제16권2호
• /
• pp.161-165
• /
• 1997

본(本) 실험(實驗)은 공장(工場) 폐수(廢水)가 작물(作物)의 생육(生育)에 미치는 영향을 구명(究明)하기 위하여 수도(水稻) 묘(苗)의 초기(初期) 생장(生長)에 미치는 영향을 조사하였고, 벼, 보리, 배추, 참외, 토마토를 파종(播種)한 폿트에 공장(工場) 폐수(廢水)의 농도를 달리하여 처리한 후 작물(作物)의 출현율(出現率)과 건물중(乾物重)을 조사하였다. 실험에 사용된 폐수(廢水)의 종류는 피혁(皮革) 공장(工場), 페놀 수지 공장(工場), 염료(染料) 공장(工場)의 폐수(廢水)였다. 실험의 결과는 다음과 같다. 1. 수도(水稻) 묘(苗)는 각 공장(工場)의 폐수(廢水)에 의하여 억제가 되었으나 피혁(皮革) 공장(工場)의 경우는 1/16이하로 희석(稀釋)된 저농도(低濃度)에 의해서는 촉진(促進)되는 결과를 보였다. 2. 피혁(皮革) 공장(工場)의 경우 각 작물(作物)이 반응은 보리가 가장 피해가 적었고 토마토의 경우 피해가 가장 크게 나타났다. 3. 페놀 수지 폐수(廢水)는 배추와 참외가 크게 나타났고, 보리는 피해가 적었다. 4. 염료(染料) 공장(工場)의 폐수(廢水)는 토마토와 참외가 가장 많이 억제되었고, 보리의 경우 피해의 정도가 낮았다. 5. 각 (各) 작물종(作物種)들의 폐수(廢水)에 대한 반응은 채소인 토마토와 참외의 피해가 컸고, 화곡류인 보리와 벼가 작았다.

• 한국가구학회지
• /
• 제10권1호
• /
• pp.51-56
• /
• 1999

This research was carried out to investigate the Hanji sludge(black color)-wood fiber and wood particle composited applied by waste sludges arising from the making process of Hanji (Korea paper). In experimental design, four levels of the mixed ratio of Hanji sludge to wood fiber or wood particle(10:90, 20:80, 30:70 and 40:60), three kinds of the resin(PMDI, urea and phenol resin)and three kinds of the specific gravity(0.6, 0.75 and 0.9) were designed to determine the tensile strength of Hanji sludge-wood fiber and wood particle composites. From the results and discussion, it may be concluded as follows: In Hanji sludge-wood fiber and wood particle composites, tensile strengths showed decreasing tendency absolutely by increasing Hanji sludge additive, but clearly increase with the increase of specific gravity. In Hanji sludge-wood fiber composites, there were no differences between PMDI and urea resin-bonded composites, but phenol resin-boned composites were made possibly until the addition of 30% Hanji sludge. On the other hand, Hnji sludge-wood particle composites(SpGr=0.6) have very low tensile strength values. But they were made favorably until the addition of 20% Hanji sludge in Hanji sludge-wood particle composites(SpGr=0.9).

• Journal of the Korean Wood Science and Technology
• /
• 제31권5호
• /
• pp.80-87
• /
• 2003

본 연구는 목재파레트폐잔재 파티클과 페놀수지(고형분함량 50%, 함지율 30%) 및 점토를 사용하여 3층 점토목질파티클보드를 제조하고 소정의 탄화온도(400℃, 600℃, 800℃)에서 탄화하여 Clay-Woodceramics를 제조한 후 물리·기계적성질을 검토하였다. 점토의 효과를 구명하기 위하여 전건파티클중량의 10%, 20%, 30%를 첨가하였으며 연구 결과는 다음과 같다. 1. Clay-Woodceramics의 탄화수율은 탄화온도가 높을수록 감소하였고, 폭 및 두께 수축율은 증가하였다. 그러나 Clay첨가량이 많을수록 탄화수율은 증가하였으며 폭 및 두께 수축율은 감소하였다. 2. Clay-Woodceramics의 비중은 탄화온도가 높을수록 증가하며, 흡습율도 증가하였다. Clay의 첨가량이 많을수록 같은 온도조건에서 높은 비중을 나타냈으며, 흡습율은 감소하는 경향을 보였다. 그러나 흡수율은 제조조건에 따른 통계적인 차이가 없었다. 3. 탄화온도가 높아짐에 따라 Clay-Woodceramics의 휨강도 및 휨탄성계수는 증가하는 경향을 나타냈다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권2호
• /
• pp.42-45
• /
• 1996

A residue from the newsprint waste was investigated as a filler in adhesive for bonding southern pine plywood. The residue was prepared by drying the wet residue to 8% moisture content and grinding the dry material using a laboratory Wiley mitt with a 75-${\mu}m$(200-mesh) screen. The residue was compared to a commercial filler commonly used in structural plywood adhesives. A total of 48 three-ply panels. 12.7mm nominal thickness and 0.3 by 0.3 m in size, were fabricated at two press times(4 and 5 min) and three assembly times(20, 40 and 60 min). Evaluations of the residue were carried out by performance tension shear tests after two 4-hour boil accelerated aging tests on plywood. The test results included tension shear strength and estimated wood failure values. All plywood made with the residue filler were comparable to the control-bonded plywood. These results indicate that residue from the newsprint waste streams would be suitable as filler for plywood adhesives.