• 제목/요약/키워드: Phenol resin

검색결과 248건 처리시간 0.029초

페놀수지 및 에틸렌 글리콜을 첨가한 유리질 카본 코팅층의 물성 제어 (Morphology control of glassy carbon coating layer to additive ethylene glycol and phenolic resin)

  • 주상현;주영준;이혁준;심영진;박동진;조광연
    • 한국결정성장학회지
    • /
    • 제32권3호
    • /
    • pp.89-95
    • /
    • 2022
  • 본 연구에서는 페놀수지를 사용하여 흑연표면에 유리질 카본 코팅을 진행하였다. 코팅액은 균일한 표면을 가지는 유리질 카본 코팅층 형성을 위해 페놀수지와 경화제, 희석제, 첨가제 등을 혼합하였다. 코팅된 페놀수지는 25~60℃에서 건조 100~200℃에서 경화 500~1,500℃에서 열처리하여 유리질 카본으로 전환하였다. 유리질 카본의 특성 분석을 위해 FTIR, XRD, SEM 분석, 밀도/기공율/접촉각 측정을 진행하였다. 유리질 카본 형성에 있어 최적 온도는 약 1,000℃로 확인되었다. 그리고 첨가제의 함량이 높아질수록 코팅 표면의 결함감소, 기공율 감소, 접촉각 증가, 밀도 증가 등의 효과를 보였다. 첨가제를 통한 유리질 카본 코팅층 형성 방법은 흑연 코팅 및 다른 분야에 적용이 가능할 것으로 기대된다.

낙엽분말(落葉粉末)을 이용(利用)한 합판용(合板用) 접착제(接着劑)의 증량(增量)에 관(關)한 연구(硏究) (Studies on the Extending of Plywood Adhesives used Foliage Powder)

  • 김종만;박종열;이필우
    • 한국산림과학회지
    • /
    • 제42권1호
    • /
    • pp.83-100
    • /
    • 1979
  • 본연구(本硏究)는 합판용(合板用) 증량제(增量劑)로 사용(使用)하고 있는 도입소맥분(導入小麥粉)을 값이 싸고 대량생산(大量生產)이 가능(可能)한 낙엽분말증량제(落葉粉末增量劑)로 개발(開發)하여 대치(代置)키 위(爲)한 가능성(可能性)을 구명(究明)하기 위(爲)해서 계획(計劃)하고 착수(着手)되었다. 낙엽증량제(落葉增量劑)로 채취가공(採取加工)하기 위(爲)한 수종(樹種)은 침엽수종(針葉樹種)에서 소나무를 택(擇)하였고 활화수종(濶華樹種)에서는 미류나무, 참나무, 푸라타누스를 택(擇)하였으며, 각각(各各)의 낙엽(落葉)을 채취(採取)하여 $100{\sim}105^{\circ}C$에서 24시간동안(時間同安) 전건(全乾)시킨 다음 40 mesh로 분쇄한 분말(粉末)을 증량제(增量劑)로 사용(使用)하였으며, 이와 비교시험(比較試驗)을 위(爲)해서 소맥분(小麥粉)을 사용(使用)하였는데 소맥분(小麥粉)의 분말도(粉末度)는 100mesh의 것을 이용(利用)하였다. 증량방법(增量方法)은 합판접착용요소수지(合板接着用尿素樹脂)와 석탄산수지접착제(石炭酸樹脂接着劑)에 수종별(樹種別)로 낙엽분말(落葉粉末)과 소맥분(小麥粉)을 각각(各各) 10, 20, 30, 50 및 100%로 증량(增量)하여 합판(合板)을 가공(加工)한 다음 접착력(接着力)을 분석고찰(分析考察)하였다. 본연구(本硏究)에서 얻은 결론(結論)은 다음과 같다. 1) 요소수지접착제(尿素樹脂接着劑)에 10%를 증량(增量)한 합판(合板)의 상태접착력(常態接着力)은 소맥분증량(小麥粉增量)이 가장 높았으며, 다음은 무증량합판(無增量合板)이었고 낙엽분말(落葉粉末)을 증량(增量)한 합판(合板)은 가장 접착력(接着力)이 낮았다. 낙엽분말(落葉粉末)을 증량(增量)한 합판(合板)의 접착력순위(接着力順位)는 참나무 낙엽분말(落葉粉末)이 가장 좋았고 미류나무, 소나무, 푸라타누스낙엽분말(落葉粉末)의 순(順)으로 저하(低下)하였다. 2) 요소수지접착제(尿素樹脂接着劑)에 20%를 증량(增量)한 합판(合板)의 상태접착력(常態接着力)은 소맥분증량(小麥粉增量)이 가장 높았으며 다음은 미류나무낙엽분말증량합판(落葉粉末增量合板)이었으며 이들은 모두 무증량합판(無增量合板)보다 접착력(接着力)이 높았다. 미류나무를 제외(除外)하고 접착력(接着力)이 불량(不良)하지만 낙엽분말증량합판(落葉粉末增量合板)의 접착력순위(接着力順位)는 소나무, 푸라타누소, 참나무의 순(順)으로 낮아졌다. 3) 요소수지접착제(尿素樹脂接着劑)에 30%를 증량(增量)한 합판(合板)의 상태접착력(常態接着力)은 소맥분증량(小麥粉增量)이 가장 높았고 다음은 무증량합판(無增量合板)이었으며 낙엽분말(落葉粉末)을 증량(增量)한 합판(合板)은 접착력(接着力)이 급격히 저하(低下)하여 불량(不良)하였다. 4) 요소수지접착제(尿素樹脂接着劑)에 50%와 100%를 증량(增量)한 합판(合板)은 소맥분증량합판(小麥粉增量合板)만 우수(優秀)한 접착력(接着力)을 보여 주었을 뿐 낙엽분말(落葉粉末)을 증량(增量)한 합판(合板)은 50%에서만 소나무, 미류나무에서 약(弱)한 접착력(接着力)이 측정(測定)되었고 기타(其他)의 낙엽분말(落葉粉末)은 박리(剝離)하였고 100%에서는 모든 낙엽분말증량합판(落葉粉末增量合板)이 박리(剝離)하여 접착력(接着力)이 측정(測定)되지 않았다. 5) 요소수지접착제(尿素樹脂接着劑)에 10%를 증량(增量)한 합판(合板)의 내수접착력(耐水接着力)은 상태접착력(常態接着力)과 같이 소맥분(小麥粉)이 가장 높았고 다음은 무증량합판(無增量合板)이었으며 낙엽분말(落葉粉末)을 증량(增量)한 합판(合板)은 미류나무를 제외(除外)하고 모두 낮은 접착력(接着力)을 나타냈다. 6) 요소수지접착제(尿素樹脂接着劑)에 20%를 증량(增量)한 합판(合板)의 내수접착력(耐水接着力)은 무증량합판(無增量合板), 소맥분증량합판(小麥粉增量合板), 낙엽분말증량합판(落葉粉末增量合板) 순(順)으로 접착력(接着力)이 낮아졌으나 낙엽분말증량합판(落葉粉末增量合板)은 미류나무와 참나무를 제외(除外)하고 박리(剝離)하였다. 7)요소수지접착제(尿素樹脂接着劑)에 30%이상(以上)을 증량(增量)한 합판(合板)의 내수접착력(耐水接着力)은 30%와 50%의 소맥분증량(小麥粉增量)에서 접착력(接着力)이 측정(測定)되었을 뿐 낙엽분말(落葉粉末)은 모두 박리(剝離)하여 접착력(接着力)이 측정(測定)되지 않았다. 8) 석탄산수지접착제(石炭酸樹脂接着劑)에 10%를 증량(增量)한 합판(合板)의 상태접착력(常態接着力)은 소맥분증량(小麥粉增量)이 가장 우수(優秀)하였고 낙엽분말증량합판(落葉粉末增量合板)은 접착력(接着力)이 낮았으나 그 순위(順位)는 참나무, 미류나무, 소나무 순(順)이었고 푸라타누스에서는 박리(剝離)하였다. 9) 석탄산수지접착제(石炭酸樹脂接着劑)에 20%를 증량(增量)한 합판(合板)의 상태접착력(常態接着力)은 소맥분증량(小麥粉增量)이 가장 우수히였으나 소나무 낙엽분말합판(落葉粉末合板)이 그 다음으로 급상승(急上昇)하였으며 다음 순위(順位)는 참나무, 미류나무의 순(順)으로 저하(低下)하였고 푸라타누스는 박리(剝離)하였다. 10) 석탄산수지접착제(石炭酸樹脂接着劑)에 30%를 증량(增量)한 합판(合板)의 상태접착력(常態接着力)은 소나무가 급상승(急上昇)한 접착력(接着力)으로 소맥분증량합판(小麥粉增量合板)보다 우수(優秀)하였으나 미류나무, 참나무는 20%증량(增量) 보다 저하(低下)하는 경향을 나타내었으며 푸라타누스는 박리(剝離)하였다. 11) 석탄산수지접착제(石炭酸樹脂接着劑)에 50%와 100%를 증량(增量)한 합판(合板)의 상태접착력(常態接着力)은 소나무 낙엽분말증량합판(落葉粉末增量合板)과 소맥분증량합판(小麥粉增量合板)이 우수(優秀)한 접착력(接着力)을 보여주고 있는데 반(反)하여 미류나무, 참나무, 푸라타누스등(等) 활엽수낙엽분말(濶葉樹落葉粉末)의 증량(增量)은 박리(剝離)하여 접착력(接着力)이 측정(測定)되지 않았다. 12) 낙엽분말(落葉粉末)의 증량(增量)은 요소수지접착제(尿素樹脂接着劑)에서 미류나무 낙엽분말(落葉粉末)을 20%까지 첨가사용(添加使用)할 수 있으며 석탄산수지접착제(石炭酸樹脂接着劑)에서는 소나무 낙엽분말(落葉粉末)을 소맥분(小麥粉)의 증량(增量)과 똑같이 첨가사용(添加使用)할 수 있다.

  • PDF

한지(韓紙) 슬러지·목재(木材) 파티클 복합(複合)보드의 제조연구(製造硏究) - I. 한지(韓紙) 슬러지·목재(木材) 파티클 복합(複合)보드의 물리적(物理的) 성질(性質) (Studies on Manufacture of Hanji(Korean Paper) Sludge·Wood Particle Composite - I. Physical Properties of Hanji(Korean Paper)Sludge·Wood Particle Composite)

  • 이필우;이학래;손정일
    • Journal of the Korean Wood Science and Technology
    • /
    • 제29권2호
    • /
    • pp.109-117
    • /
    • 2001
  • 한지(韓紙) 제조(製造) 공정(工程) 중에서 발생하는 백색 슬러지와 흑색 슬러지를 각각 일정비율(10, 20, 30, 40%)로 목재(木材) 파티클과 혼합(混合)하고 PMDI, 요소 및 페놀수지를 이용하여 각각 목표비중(目標比重) 0.60, 0.75, 0.90 별로 복합(複合)보드를 제조(製造)하여 물리적(物理的) 성질(性質)을 측정 분석한 결과 흡수길이변화율은 대조보드에 비해 크게 증가하지 않았으며 흡수두께팽창율은 PMDI를 적용한 백색 슬러지 목재(木材) 파티클 복합(複合)보드가 가장 낮은 값을 보였고 흡수율은 흑색 슬러지 목재(木材) 파티클 복합(複合)보드의 경우 혼합(混合) 비율(比率)이 증가할수록 대체로 감소하는 경향을 보였다.

  • PDF

고온 및 방사선이 중성자 차폐재의 열적, 역학적 및 차폐능 특성에 미치는 영향 (Effects of High Temperature and Radiation on the Properties of Thermal, mechanical and Shielding Ability of Neutron Shielding Materials)

  • 조수행;홍순석;정명수;도재범;박현수
    • 한국재료학회지
    • /
    • 제9권4호
    • /
    • pp.404-408
    • /
    • 1999
  • Effects of heating time and radiation under high temperature on the properties of thermal, mechanical and shielding ability of modified (KNS-101), hydrogenated bisphenol-A(KNS-201) type epoxy resin and phenol-novolac(KNS-301) type epoxy resin based neutron shielding materials that are used for shipping casks for radioactive material have been investigated. At early stages, the offset temperatures of KNS-101, KNS-201 and KNS-301 increased with the heating time under high temperature, but it was rarely affected by the heating time in the later stages. In addition, the thermal conductivities of KNS-101 and KNS-201 decreased with heating time, but that of KNS-301 increased with the heating time. On the contrary, the thermal expansion coefficients of neutron shielding materials decreased with heating time. At the high temperature, the tensile strength and flexural strength of the shielding materials decreased with heating time. On the contrary, the thermal expansion coefficients of neutron shielding materials decreased with heating time. At the high temperature, the tensile strength and flexural strength of the shielding materials of KNS-101 and KNS-301 increased with heating time, but those of KNS-201 decreased with heating time. The shielding ability of neutron shielding materials slightly increased with the radiation dose, and shielding abilities of shielding materials of KNS-101 and KNS-201 were affected to a more extent than that of KNS-301 by radiation dose under high temperature.

  • PDF

낙동강 수질중 유기물질과 독성 (Organic Compounds in the Nak Dong River and Its Toxicity)

  • 류병호;심종환;최진택;조현철;정종순
    • 한국환경보건학회지
    • /
    • 제20권1호
    • /
    • pp.39-53
    • /
    • 1994
  • This study aims to investigate organic compounds and its toxicity by Ames test and chromosomal aberration in the water of the Nak Dong River. Six sampling sites such as Goryung, Hagueun, Maelie, Duksan, Haedong and Myungiang were selected for these pur15oses. 200 l water samples were absorbed on XAD-2 resin columns (2.5X30cm), eluted with organic solvents mixture of acetone: cyclohexane and then dried under vacuum condition. The extracts from the XAD-2 resin was injected into GC/MS and 184 organic compounds were identified such as aldehydes, aromatic compounds, ketones, phenols, hydrocarbons, alcohols, carboxylic acids, alkanes and some unknowns. The US EPA priority pollutants such as naphthlene, bis(2-ethylhexyl)phthalate and other pollutants, 1,2-diethyl benzene, 1,2,3,4-tetrahydronaphthalene and cyclohexanol were detected in these samples. The concentration of chemical pollutants such as 1,2-diethyl benzene, nephthalene, 1,2,3,4-tetrahydronaphthalene, bis(2-ethylhexyl)phthalate and cyclohexanol were ranged into 1.228 $\mu$g/l, 298 $\mu$g/l, 30.191 $\mu$g/l, 1.147 $\mu$g/l and 2.839 $\mu$g/l, respectively. The mutagenic activity of XAD-2 extracts were tested on Salmonella typhimurium TA 98, TA 100, TA 1535 and TA 1537 and then exhibited strong mutagenic activity against S. typhimurium TA 98 and TA 100 in the presence of S$_9$. Amon them, bis(2-ethylhexyl)phtalate and 1,2-diethyl benzene showed the most strongest mutagenic activity against S. typhimurium TA 98 and TA 100 in the presence of S$_9$. On the other hands, chromosomal aberration of XAD-2 extracts in the human blood cells were not occurred by the sampling water at Goryung, Hagueun, Maelie and Duksan, Chromosomal aberration were also not occurred by the each concentration of 0.05, 0.1 amd 0.3 mg/l of each 1,2-diethyl benzol, bis(2-ethylhexyl)phthalate, naphthalene, phenol, cyclohexanol and benzothiazol test solution.

  • PDF

New Application of Clay Filler for Carbon/Carbon Composites and Improvement of Filler Effect by Clay Size Reduction

  • Jeong, Eui-Gyung;Kim, Jin-Hoon;Lee, Young-Seak
    • Carbon letters
    • /
    • 제11권4호
    • /
    • pp.293-297
    • /
    • 2010
  • To investigate new potential application of a clay material for C/C composites, illite added C/C composites were prepared with various illite contents. The improvement of filler effect by illite size reduction was also investigated using wet ballmilling by evaluating illite/phenolic resin infiltration using bulk density and porosity measurements, chemical structural changes of the composites using XRD, and thermal oxidation stability in air of the composites using TGA. The size reduction of illite resulted in narrower particle size distribution and improved illite infiltration into carbon preform. And the resultant C/C composites prepared with illite had even more improved thermal oxidation stability in air, showing more increased IDTs up to $100^{\circ}C$, compared to those of the C/C composites with pristine illite, due to the SiC formation through carbothermal reduction between illite and carbon materials. The illite induced delay in oxidation of the illite-C/C composites was also observed and the delayed oxidation behavior was attributed to the layered structure of illite, which improved illite/phenol resin infiltration. Therefore, the potential use of illite as filler to improve oxidation stability of C/C composite can be promising. And the size reduction of illite can improve its effect on the desired properties of illite-C/C composites even more.

Ortho-cresol Novolac형 에폭시의 화학레올로지 특성에 미치는 아민 개질제의 영향 (Effect of Aminosiloxane Modifier on Chemorheological Properties of Ortho-cresol Novolac Epoxy)

  • 김윤진;안병길;김우년;서광석;김환건;윤초규
    • 폴리머
    • /
    • 제26권1호
    • /
    • pp.88-97
    • /
    • 2002
  • ortho-cresol novolac형 에폭시/페놀 경화제/triphenylphosphine 수지 시스템의 화학 레올로지 특성에 미치는 아민 실록산 개질제의 영향을 검토하였다. DSC측정으로부터 아민 개질제에 의해 경화 속도와 전환량이 증가하였으며 유리전이온도의 증가도 관찰할 수 있었다. 또한, 저장 탄성률과 손실 탄성률의 교차점으로부터 구한 겔화 시간 및 임계 전환량의 감소를 확인할 수 있었다. 이것으로부터 등온 경화반응이 빠르게 진행됨으로써 점도가 상승하는 것을 알 수 있었다. 전환량의 함수로 얻어진 유리전이온도와 측정된 점도로부터 modified WLF 방정식에서의 $C_1$$C_2$를 온도 함수로써 나타낼 수 있었으며, 유리전이온도와 $C_1$$C_2$를 modified WLF 방정식에 적용함으로써 등온 경화반응에 따른 점도변화를 정확히 예측할 수 있었다.

한지(韓紙) 슬러지·목재(木材) 파티클 복합(複合)보드의 제조연구(製造研究) II. 한지(韓紙) 슬러지·목재(木材) 파티클 복합(複合)보드의 기계적(機械的) 성질(性質) (Studies on Manufacture of Hanji(Korean Paper) Sludge·Wood Particle Composite II. Mechanical Properties of Hanji(Korean Paper) Sludge·Wood Particle Composite)

  • 李弼宇;李鶴來;孫廷一;金顯中
    • Journal of the Korean Wood Science and Technology
    • /
    • 제30권2호
    • /
    • pp.121-127
    • /
    • 2002
  • 한지제조공정(韓紙製造工程) 중(中)에서 발생(發生)하는 백색 슬러지와 흑색 슬러지를 각각 일정비율(10, 20, 30, 40%)로 목재(木材)파티클과 혼합(混合)하고 PMDI, 요소 및 페놀수지를 이용하여 목표비중(目標比重) 0.60, 0.75, 0.90 별로 복합(複合)보드를 제유(製遺)하여 기포적(機捕的) 성질(性質)을 측정한 결과 파티클보드에 한지(韓紙) 슬러지를 약 20%까지는 혼합(混合)하여 복합재(複合材)를 제조하여도 충분히 가능(可能)하리라 믿어진다.

간벌재로 제조된 톱밥보드의 물성(I) - 가압압력 및 열압시간의 영향 - (Properties of Sawdust Board Made from Thinned Logs( I ) - Effect of Pressure and Press Time)

  • 오승원
    • 임산에너지
    • /
    • 제21권2호
    • /
    • pp.10-16
    • /
    • 2002
  • 소나무, 낙엽송 및 잣나무 간벌재를 재료로 가압압력과 열압시간을 달리하여 톱밥 보드를 제조하고, 이들이 보드의 물성에 미치는 영향을 조사하였다. 두께 팽창율과 흡수율은 열압시간이 증가함에 따라 감소하였으며, 휨강도와 경도는 열압시간이 증가함에 따라 증가하였다. 톱밥보드의 물성은 가압압력 보다 열압시간에 의해 영향을 받음을 알 수 있었고, 수종간 비교에서는 뚜렷한 경향을 발견 할 수 없었다.

  • PDF

표면처리 탄소섬유가 PEMFC용 탄소/에폭시 복합재료 분리판의 기계적 강도에 미치는 영향 (Effect of Surface-Modified Carbon Fiber on the Mechanical Properties of Carbon/Epoxy Composite for Bipolar Plate of PEMFC)

  • 이홍기;한경식
    • 한국수소및신에너지학회논문집
    • /
    • 제31권1호
    • /
    • pp.49-56
    • /
    • 2020
  • Epoxy/carbon composite was used to prepare a bipolar plate for polymer electrolyte membrane fuel cell (PEMFC). Phenol novolac-type epoxy and diglycidyl ether of bisphenol A (DGEBA)-type epoxy mixture was used as a matrix and graphite powder, carbon fiber (CF) and graphite fiber (GF) were used as carbon materials. In order to improve the mechanical properties of the bipolar plate, surface-modified CF was incorporated into the epoxy/carbon composite. To determine the cure temperature of the epoxy mixture, differential scanning calorimetry (DSC) analysis was performed and the data were introduced to Kissinger equation in order to get reaction activation energy and pre-exponential factor. Tensile and flexural strength was obtained by using universal testing machine (UTM). The surface morphology of the fractured specimen and the interfacial morphology between epoxy matrix and CF or GF were observed by a scanning electron microscopy (SEM).