• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.1922-1927
• /
• 2003

Nonlinear normal mode (NNM) vibration, in a nonlinear dual mass Hamiltonian system, which has 6$\^$th/ order homogeneous polynomial as a nonlinear term, is studied in this paper. The existence, bifurcation, and the orbital stability of periodic motions are to be studied in the phase space. In order to find the analytic expression of the invariant curves in the Poincare Map, which is a mapping of a phase trajectory onto 2 dimensional surface in 4 dimensional phase space, Whittaker's Adelphic Integral, instead of the direct integration of the equations of motion or the Birkhoff-Gustavson (B-G) canonical transformation, is derived for small value of energy. It is revealed that the integral of motion by Adelphic Integral is essentially consistent with the one obtained from the B-G transformation method. The resulting expression of the invariant curves can be used for analyzing the behavior of NNM vibration in the Poincare Map.

• 한국경영과학회지
• /
• 제23권2호
• /
• pp.103-129
• /
• 1998

Corporate level decision making with multiple decision makers in a consistent way is essential in Decision Support System. However, since the decision makers have different interests and knowledge, the models used by them are also different in their level of abstraction. This makes decision makers waste a lot of efforts for an integrated decision making. The purpose of this paper is to propose an integration mechanism so that collaborative decision making models may be used synthetically in multi-abstraction level. Models are classified as multimedia model, mathematical model, qualitative model, causal ＆ directional model, causal model, directional model and relationship model according to the level of abstraction. The proposed integration mechanism consists of model interpretation phase. model transformation phase, and model integration phase. Specifically, the model transformation Phase is divided into (1) model tightening mode which gather information to make a model transformed into upper level model, and (2) model relaxing mode which makes lower level model. In the model integration phase, models of same level are to be integrated schematically. An illustrative M＆A-decision example is given to show the possibility of the methodology.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.799-804
• /
• 2001

Nonlinear normal mode (NNM) vibration, in a nonlinear dual mass Hamiltonian system, which has 6th order homogeneous polynomial as a nonlinear term, is studied in this paper. The existence, bifurcation, and the orbital stability of periodic motions are to be studied in the phase space. In order to find the analytic expression of the invariant curves in the Poincare Map, which is a mapping of a phase trajectory onto 2 dimensional surface in 4 dimensional phase space, Whittaker's Adelphic Integral, instead of the direct integration of the equations of motion or the Birkhotf-Gustavson (B-G) canonical transformation, is derived for small value of energy. It is revealed that the integral of motion by Adelphic Integral is essentially consistent with the one obtained from the B-G transformation method. The resulting expression of the invariant curves can be used for analyzing the behavior of NNM vibration in the Poincare Map.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1997년도 추계학술대회발표논문집; 홍익대학교, 서울; 1 Nov. 1997
• /
• pp.101-104
• /
• 1997

Providing information on corporate level decision making for multiple decision makers in a consistent way is essential in Decision Support Systems. However, since the decision makers have different background and knowledge, the models used by them are also different in representation models. This makes the decision makers require a lot of efforts for model integration in an integrated decision making. The purpose of this paper is to propose an integration mechanism for synthetic use of multi-abstraction level decision making models. The proposed integration mechanism consists of model interpretation phase, model transformation phase and model integration phase. Specifically, the model transformation phase is divided into model tightening mode which gather information to makes a model transformed into upper level model, and model relaxing mode which makes lower level model.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1754-1763
• /
• 2017

This paper analyses the characteristics of incomplete-journey double-circuit transmission lines on the same tower formed by single-circuit lines and double-circuit lines, and then presents a fault location algorithm based on identification of fault branch. With the relationship between the three-phase system and the double-circuit line system, a phase-mode transformation matrix for double-circuit lines can be derived. Based on the derived matrix, the double-circuit lines with faults can be decoupled, and then the fault location for an incomplete-journey double-circuit line is achieved by using modal components in the mode domain. The algorithm is divided into two steps. Firstly, the fault branch is identified by comparing the relationships of voltage amplitudes at the bonding point. Then the fault location, on the basis of the identification result, is calculated by using a two-terminal method, and only the fault distance of the actual fault branch can be obtained. There is no limit on synchronization of each terminal sampling data. The results of ATP-EMTP simulation show that the proposed algorithm can be applied within the entire line and can accurately locate faults in different fault types, fault resistances, and fault distances.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.116-119
• /
• 1999

The effects of secondary phase morphology and carbon content on the plastic deformation of 0.2C-1.5Si-1.5mn TRIP(TRansformed Induced Plasticity) steel have been investigated at various annealing and bainitic transformation temperatures. The morphology of ferrite and secondary phases was controlled by the annealing temperature and the distribution of secondary phase was controlled by the bainitic transformation temperature. The secondary phase contributed to elongation and/or UTS depending on the ferrite morphology which determined deformation mode simple elongation or rotation of secondary phase along the tensile direction In case of the sample containing the granular type retained austenite the elongation was improved as carbon stabilized the austenite phase. If the film-shape retained austenite in acicular ferrite was dominant however UTS was enhanced as the transformed martensite was hardened by carbon.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제2B권3호
• /
• pp.133-139
• /
• 2002

In this paper, a prototype of an active auxiliary quasi-resonant DC link (QRDCL) snubber assisted voltage source bidirectional power converter (AC to DC and DC to AC) operating at zero voltage soft-switching (BVS) PWM nlode is presented for a Battery Energy Storage System (BESS). The operating principle of this QRDCL circuit and multifunctional control-based converter system, including PWM inverter mode in which energy flows from the battery bank to the three-phase utility-grid in addition to an active PWM converter mode in which energy flows from the utility-grid to the battery banks are described respectively by the control implementation on the basis of d-q coordinate plane transformation. The multifunctional operation characteristics of this three-phase ZVS PWM bi-directional converter with QRDCL is demonstrated fer a BESS under the power conditioning and processing schemes of energy supply mode and energy storage mode, and compared with a conventional three-phase hard switching PWM bi-directional converter for a BESS. The effectiveness of the three-phase ZVS PWM hi-directional converter with QRDCL is proven via the simulation analysis.

• Preventive Nutrition and Food Science
• /
• 제12권4호
• /
• pp.259-266
• /
• 2007

It has been proposed that the mode of action of nisin against vegetative cells and spores of Clostridium botulinum is different. However, clear explanation is not available. Therefore, nisin action against vegetative cells and spores of C. botulinum was investigated in this study. Nisin was added at various stages of spore-to-vegetative cell transition and changes to sensitivity to the bacteriocin were observed. Different nisin preparation (Nisaplin or pure nisin) was compared for their activity against different stages of spore transformation of C. botulinum ATCC 25763. Germination was measured by determining loss of heat resistance and observing phase darkening of spores under phase-contrast microscope. Nisin acted bactericidally against vegetative cells, but acted sporostatically against spores of C. botulinum under the same concentration. This bactericidal and sporostatic action of nisin was dependent on the concentration of nisin used. Presence of nisin during spore activation by heat increased subsequent phase darkening and germination rates. However, nisin inhibited the germination and the outgrowth, when it was added after heat activation stage. Findings from this study suggest that the time of addition of nisin is very important for the effective control of spores during the heating process of foods. In addition, it may be possible to apply nisin at the stage of processing that coincides with the most sensitive stage of spore transformation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.864-867
• /
• 1995

Presented in the paper is a structured approach to modeling automated manufacturing system (AMS) in the form of an event graph. The proposed two-phase procedure for formal modeling is 1) reference modeling by schematic supervisory control modeling and 2) event graph transformation from supervisory control model. Also described is a formal model for a small-sized FMS in the form of an event graph.

• 한국재료학회지
• /
• 제12권8호
• /
• pp.608-612
• /
• 2002

The sliding wear behavior of an iron-base NOREM 02 hardfacing alloy was investigated in the temperature range of $25～250^{\circ}C$ under a contact stress of 103MPa (15ksi). With increasing temperature, the wear loss of Norem 02 in water increased slightly up to $180^{\circ}C$ at which Norem 02 showed the wear loss of 2.1mg. The wear resistance of Norem 02 resulted from the surface hardening due to the strain-induced phase transformation from austenite to $\alpha$'martensite during sliding wear. The wear loss of Norem 02 was smaller in water compared to air at same temperature because the water could be served as a sort of lubricant. The wear mode of NOREM 02 changed abruptly to severe adhesive wear at $190^{\circ}C$ and galling occurred above $200^{\circ}C$. It was caused that the strain- induced phase transformation took place below $180^{\circ}C$ while not above $190^{\circ}C$. Therefore, Norem 02 was considered to be inadequate at high temperature service area.