• 제목/요약/키워드: Phase-Doppler Technique

검색결과 76건 처리시간 0.022초

분무 액적 특성 계측을 위한 디지털 입자 홀로그래피 시스템의 개발 (Development of Digital Particle Holographic System for Measurements of the Characteristics of Spray Droplets)

  • ;강보선
    • 한국분무공학회지
    • /
    • 제15권2호
    • /
    • pp.53-60
    • /
    • 2010
  • This study presents development of digital particle holographic system and its application to spray field to measure three-dimensional velocities and sizes of spray droplets. A double exposure hologram recording system with synchronization system for time control was established and digital holograms can be recorded in a short time interval. To process recorded holograms, the correlation coefficient method was used for focal plane determination of particles. To remove noises and improve the quality of holograms and reconstructed images, the Wiener filter was adopted. The two-threshold and image segmentation methods were used in binary image transformation. For particle pairing, the match probability method was adopted. The developed system was applied to spray field and three-dimensional velocities and sizes of spray droplets were measured. The measurement results of digital holographic system were compared with those made by laser instruments, PDPA(Phase Doppler Particle Analyzer), which proved the feasibility of in-line digital particle holographic system as a good measurement tool for spray droplets.

2유체 분사노즐을 이용한 분무 및 연소특성에 관한 실험적 연구 (An Experimental Study on the Characteristic of Sprays and Spray Flames by Twin-Fluid Atomizer)

  • 백민수;오상헌
    • 대한기계학회논문집
    • /
    • 제19권2호
    • /
    • pp.548-558
    • /
    • 1995
  • An experimental investigation has been conducted to study the spray and combustion characteristics using the air-assisted twin fluid atomizer. Axial mean and fluctuating velocity components as well as drop-size distributions in non-reaction spray were measured with a nonintrusive phase doppler technique. Droplet number density distributions were also visualized using high speed CCD camera. Locations of spray and flame boundaries are obtained by direct photographic method. It is confirmed that at the fixed fuel flow rate, the increase of the atomizing air flow causes improvements on both spray and combustion characteristics under stable flame conditions. Internal group combustion modes where flame is located inside the spray boundary are observed to exist in the upstream region of higher droplet number density.

쉬라우드 공기의 선회 유동 특성 변화에 따른 심플렉스 연료 노즐의 분무 특성 (The Spray Characteristics of Simplex Atomizer under Various Shroud Air Conditions with Swirl Flow)

  • 이동훈;이강엽;최성만
    • 한국분무공학회지
    • /
    • 제9권3호
    • /
    • pp.35-41
    • /
    • 2004
  • The spray characteristics were investigated to study the effect of shroud air with swirl flow on simplex type fuel injector for gas turbine combustor. The spray tests using PDA(Phase Doppler Anemometry) technique were conducted to compare the performance of simplex atomizer with $0^{\circ},\;40^{\circ},\;50^{\circ}$ swirled-shroud air conditions. In this study. we found that the injector with strong swirled-shroud air has the better atomization Performance compared with weaker swirled and non-swirled conditions.

  • PDF

위상도플러법에 의한 입자의 크기측정 (Particle Size Measurements Using Phase Doppler Technique)

  • 최태민;김상진;박무룡
    • 기계저널
    • /
    • 제33권12호
    • /
    • pp.1076-1085
    • /
    • 1993
  • 레이저광이 가지는 지향성, 단색성, 공간적 집속성 등의 성질을 이용하는 각종 측정장치는 광섬 유의 발달과 새로운 신호처리계의 개발로 그 적용 범위가 점점 확대되고 있다. 레이저 도플러 신호의 위상차를 이용하여 운동상태의 입자의 크기와 속도를 동시에 측정할 수 있는 측정장치가 80년대에 실용화되어 캐비테이션, 분무노즐, 기름버너, 엔진연소 등 많은 분야에서 다양하게 사 용되고 있다. 이 측정방법은 Durst와 Zare에 의해 도플러 신호의 위상과 입자의 크기는 선형적인 함수 관계가 있음이 밝혀진 이래, Bachalo, Buchhave, Knuhfsen과 Olldag 등에 의해 급속히 발 전되었다. 현재 국내에도 덴마크의 단텍사, 미국의 에어로메트릭스사 등에서 개발한 장비가 3-4 기관에서 사용되고 있다. 이 글에서는 위상도플러법에 의한 입자의 크기측정에 관한 기초 이론을 참고문헌을 인용하여 설명하고, 단텍사에서 개발한 위상도플러 측정장치인 입자운동 해석장치 (PDA)를 사용하여 본 연구실에서 실험한 버너용 압력분사식 노즐에서 분사된 액적들의 국소부분 거동에 대해 소개하기로 한다.

  • PDF

복합 모델을 이용한 연료 인젝터의 분무 미립화 모델링 (Modeling of Spray Atomization of Fuel Injector Using Hybrid Model)

  • 박성욱;김형준;류열;이창식
    • 한국자동차공학회논문집
    • /
    • 제10권6호
    • /
    • pp.27-33
    • /
    • 2002
  • This paper presents the comparison of prediction accuracy of hybrid models. To obtain the experimental results fur comparing with the numerical results, the macroscopic and microscopic structures of the hollow-cone spray such as spray development process, spray penetration and the distribution of mean droplet size are investigated by using a shadowgraph technique and phase Doppler particle analyzer. Also, the numerical researches using various hybrid models are performed. LISA model and WAVE model are used for the primary breakup, and TAB, DDB, and RT model are used for the secondary breakup.

PIV 및 PDA 계측에 의한 소형 액체로켓엔진 인젝터의 분무특성 연구 (A Study on the Spray Characteristics of Small LRE Injector through PIV and PDA Measurements)

  • 김진석;정훈;김정수;박정;김성초;최종욱;장기원
    • 한국가시화정보학회:학술대회논문집
    • /
    • 한국가시화정보학회 2006년도 추계학술대회 논문집
    • /
    • pp.63-67
    • /
    • 2006
  • Spray characteristics of an injector employed in mono-propellant hydrazine thrusters were investigated by PIV(particle image velocimetry) and PDA(phase Doppler anemometry) techniques. The instantaneous plane images captured by PIV measurement were examined in order to judge the pass-fail criteria of spray injection performance according to the specific pressure supplied. PDA technique was also applied to measure the velocity and droplet size of spray which were not obtainable by PIV measurement. The objective of this experimental study is the evaluation of the injector performance which may be utilized for the design of brand-new injector through the clear understanding of spray characteristics.

  • PDF

하드디스크 서스펜션의 초음파 진동측정 기술 (AN ULTRASONIC METHOD FOR VIBRATION MEASUREMENT OF THE SUSPENSION IN HARD DISK DRIVES)

  • 하완;김노유
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 추계학술대회논문집
    • /
    • pp.720-725
    • /
    • 2000
  • A new ultrasonic pulse-echo technique was developed and described for vibration measurement of the suspension assembly in hard disk drives. The method is based upon the difference in magnitude of two consecutive reflection waves from a moving object(suspension), while the traditional ultrasonic vibrometer uses the phase shift of the reference wave and the reflection wave. A cone-shape delay line is designed to access the small structure. A simple mathematical model is presented and analyzed with experimental results to show the feasibility of the method. The advantages of this ultrasonic vibration measurement method are relatively high resolution, low cost, and ease of implementation comparing with the Laser Doppler vibrometer.

  • PDF

스팬방향 슬롯을 가지는 회전익 끝와류의 특성 (Characteristics of Rotor Blade Tip Vortices with Spanwise Slots)

  • 정운진;한용운
    • 대한기계학회논문집B
    • /
    • 제24권10호
    • /
    • pp.1343-1350
    • /
    • 2000
  • The evolutionary structure of tip vortices has been investigated with a two-dimensional LDV system for a plain and a slotted blade, respectively. To analyze the effect of slots which bypasses a part of main stream into the tip face, velocity profiles, vortex sizes, their displacements and turbulence intensities during one revolution of the rotor were measured by the phase averaging process. For the comparison of circumferential velocity components of the plain blade and the slotted blade, the peak values of the slotted blade were lower than those of the plain blade, and axial velocity components of the slotted blade were considerably larger than those of the plain blade. The slotted rotor blade enlarged the core size and made the vortex delayed compared with those of the plain blade at the same wake ages. Turbulence profiles had peaks inside the core radii and decayed gradually in the radial direction of vortex coordinate. Also, using a quasi 3-D LDV measurement technique the budget of turbulence kinetic energy was analyzed in radial direction of the vortex core.

회전익 끝와류의 초기 난류 구조에 관한 실험적 연구 (An Experimental Study on the Turbulence Structure of Tip Vortices Generated by a Rotor Blade at the Initial Wake Age)

  • 김영수;한용운
    • 대한기계학회논문집B
    • /
    • 제23권5호
    • /
    • pp.661-669
    • /
    • 1999
  • The evolutionary structure of a tip vortex in the initial period have been investigated by the two-dimensional LDV system. Circumferential and axial components of mean velocities, their turbulences and Reynolds stresses were measured by the phase averaging technique at seven different wake ages within one revolution of the rotor. Core growth was also analyzed. It was resulted that circumferential velocity components showed a Rankine combined vortex shape and their circulation profiles viewed in the radial direction were close to the n = 2 model of Vatistas' algebraic formula, while axial velocity components seemed to have the Gaussian profiles In these measured ranges with the base width of three times of core radii. Peaks of circumferential velocities and core radii showed distinct asymmetric behaviors before the wake age of $150^{\circ}$ over inboard and outboard sides of the slipstream, but they became symmetric afterwards. Turbulence profiles which had two peaks Inside the core radii in the earlier wake age were also changed to single peaks after $150^{\circ}$. These trends imply that the tip vortex was barely mature at this wake age.

마이크로셀 시스템에서 다양성 기법을 도입한 16 star-QAM의 성능 해석 (Performance Analysis of 16 star-QAM with Diversity Reception in Microcell Systems)

  • 지수복;고봉진
    • 한국통신학회논문지
    • /
    • 제25권1A호
    • /
    • pp.1-9
    • /
    • 2000
  • 이 논문에서는 덧셈형 백색 정규잡음과 동일채널 간섭 성분이 존재하는 마이크로셀 시스템에서 다양성 기법을 도입한 16 star-QAM은 위상 검차와 진폭 검사의 두단계로 분리되는 차동 검파 방식인데 이동 통신로상의 감쇄 때문에 성능이 떨어지는 것을 어느 정도 줄이고, 시스템의 복잡성도 줄일 수 있다. 그리고, 감쇄로 인해 성능이 떨어지는 것을 막기 위하여 위상 검파와 진폭 검파에 대해 각각 등이득 합성법과 최대비 합성법을 채택한 16 star-QAM의 성능을 라이스 계수{{{{ { K}_{ } }} }}, 최대 도플러 주시파 {{{{ { f}_{ } }} }}d{{{{ { T}_{ } }} }}, 신호대 동일채널 간섭파 전력비 그리고, 다양성의 가치 수 {{{{ { L}_{ } }} }}의 여러 가지 값에 대해 평가하였다.

  • PDF