• Culinary science and hospitality research
• /
• v.19 no.5
• /
• pp.196-205
• /
• 2013

This study showed the chemico-physical characteristics and sensory evaluation of beef loin and ribs with various kinds of cooking apparatus and methods like pan heating, boiling, grilling, steaming, cooking heating, charcoal heating and double layer pan heating. Double layer pan filled with Phase Change Materials(PCM) heating was also tested. Heating time of beef loin and ribs by oven heating was the longest as 55.5 and 25.7 min. Cooking loss of beef loin and ribs were 40.49%, 27.98% each and showed biggest in charcoal heating(p<0.05). In the chemical analysis, grilling resulted in the highest protein contents of 29.3% in the loin and double layer pan heating had 28.6% in the ribs. In the loin, 20.3% of crude fat was the highest in the double layer pan heating, and 21.9% of crude fat of ribs in the PCM heating(p<0.05). In the test of shearing forces, double layer pan heating had the lowest result of $9.14kg/cm^2$ in the loin and $7.03kg/cm^2$ in the ribs. In the 9 point-scale sensory evaluation, PCM treatment showed the best result of 7.67 in the juiciness of loin and single layer pan heating and grilling treatment had the highest score of 7.00 in the ribs. Loin in the PCM heating had 7.11 and ribs in the grilling had 7.13, showing the best in overall acceptability. With this experiments, we could find the chemico-physical and sensory characteristics of beef loin and ribs were affected by various cooking methods.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.15-20
• /
• 2008

By considering the storage temperatures of agricultural products, three types of PCMs $(K_1$, $K_2$, $K_3$) were developed to be used in temperature ranges of $0{\sim}5^{\circ}C$, $5{\sim}10^{\circ}C$ and $10{\sim}15^{\circ}C$, $K_1$ PCM for $0{\sim}5^{\circ}C$ was developed by mixture of $C_{14}H_{30}$ and soduim polyacrylate, and $K_2$ PCM for $5{\sim}10^{\circ}C$ and $K_3$ PCM for $10{\sim}15^{\circ}C$ were mixture of $C_{14}H_{30}$, $C_{18}H_{38}$ and soduim polyacrylate with different composition ratio. 'The target temperatures of cold chain system were set at $7^{\circ}C$, $13^{\circ}C$, and $17^{\circ}C$ with $K_{1-3}$, $K_{2-3}$ and $K_{3-1}$ PCMs, respectively. The times to reach the target temperatures in the storage chamber were 21 hours, 18 hours, and 61 hours with $K_1$, $K_2$, and $K_3$ PCMs, respectively. The performances of natural convection type and forced convection of the temperature controlled portable container were analyzed Apples were stored in the portable container of $5^{\circ}C$, and temperatures at surface and center were measured. The initial temperature of the apple was $25^{\circ}C$. The temperatures of apple at the surface and the center were $15^{\circ}C$ and $16^{\circ}C$, respectively, after 5 hours with natural convection type. However, the temperatures at the surface and the center were already reached to $7^{\circ}C$ within 1 hour with forced convection type. The forced convection type showed the better performance and the temperatures of portable container were maintained more than 15 hours.

• Journal of Chest Surgery
• /
• v.40 no.5 s.274
• /
• pp.329-340
• /
• 2007

Background: Matrix Metalloproteinase (MMP) inhibition has emerged as a potential therapeutic strategy for the left ventricular dilatation that occurs after myocardial infarction. This study is designed to evaluate which treatment is better for attenuating the left ventricular remodeling via MMP inhibition 1) during the early, short highly MMP producing period of the initial phase or 2) during most of the period of the initial phase after myocardial infarction. Material and Method: Myocardial infarction was induced by ligation of the left anterior descending coronary artery in rabbits. The experimental group was divided into 3 groups. The myocardial infarction only (MI only) group consisted of 7 cases. The MMP inhibitor administered for 5 days after MI (MMPI 50) group had 6 cases, and these rabbits were given MMP inhibitor for 5 days after myocardial infarction, beginning with the postoperative first day. MMP inhibitor administered for 9 days (MMPI 90) group consisted of 5 cases and these rabbits were given MMPI for 9 days the same manner as above. CG2300 was used as a selective MMPI; this is a potent MMP-2 and -9 inhibitor Two-D echocardiograms were performed on all the groups at the time of preoperative period, the post-operative 1st week, the postoperative 20 week and the postoperative 30 week, and we measured the end-diastolic dimension (EDD), the end-systolic dimension (ESD), and the ejection fraction (EF). Result: The echocardiograms generally showed postoperative left ventricular dilatation in the MI only group. The EDD was increased significantly higher in the postoperative 1 week compared to the preoperative value (p<0.05). The ESD was also increased significantly higher in the postoperative 1st week, the postoperative 20 week and the postoperative 30 week compared to the preoperative value (p<0.05). Left ventricular dilatation was noted to be less In the MMPI 9d group than in the MI only and MMPI 5d groups. In the MMPI 9d group, there was no significant change of EF postoperatively compared to the preoperative period. MMP-2 and MMP-9 were measured from the infarcted myocardial tissue at post-MI 4 weeks by performing western blotting and zymography. The changes the of protein expression and activity of MMP-2 and MMP-9 were not significant in the three MI groups and the normal heart group. Histopathologic examination revealed severe collagen deposition in the MI only group. Collagen accumulation was reduced in both the MMPI groups. The MMPI 9d group revealed an increased number of capillaries. Conclusion: Left ventricular dilatation developed rapidly after, MI from ligation of the coronary artery and MMPI attenuated the ventricular dilatation. The effect of MMPI seemed to have better a result from its usage during most of the period of the initial phase after myocardial infarction. This suggested that increased neovascularization by MMPI may also contribute to attenuation of the left ventricular remodeling.

• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.685-690
• /
• 2011

In this study, a solvothermal reaction to prepare nanocrystalline titania was carried out using $TiCl_4$ and mixed solvents of alcohol and water. The effects of the type and the composition of alcohol on the crystal structure and agglomeration of final $TiO_2$ products were investigated. The products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) as well as scanning electron microscopy (SEM). In the solvothermal reaction using the n-butanol solutions with different volume ratios of n-butanol/water (100/0, 75/25, 50/50, 25/75, 0/100), the extent of agglomeration of obtained rutile $TiO_2$ was found to change with the volume ratio of n-butanol/water, and the n-butanol/water ratio of 75/25 revealed the best result for the preparation of well-dispersed nanocrystalline $TiO_2$ powders. The crystal phase of $TiO_2$ prepared through the solvothermal reaction changed with the type of alcohol in solvent (alcohol/water = 75/25). $TiO_2$ products obtained with the aqueous solutions of methanol, ethanol and isopropanol have an anatase phase, while that with n-butanol has a rutile phase. The results showed that, in the solvothermal reaction using both $TiCl_4$ as a starting material and the alcohol-water mixed solvents without any other additive, the enhancement of dispersion and control of crystal structure of $TiO_2$ products can be feasible by simply varying the composition and type of alcohol in the mixed solvents.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.79-85
• /
• 2023

A novel low-temperature co-fired ceramic (LTCC) dielectric, composed of (1-4x)Bi_1.5Zn_1.0Nb_1.5O₇-3xBi₂Zn_2/3Nb_4/3O₇-2xLiZnNbO₄ (x=0.03-0.21), was synthesized through reactive liquid phase sintering of Bi_1.5Zn_1.0Nb_1.5O₇-xLi₂CO₃ ceramic at temperatures ranging from 850℃ to 920℃ for 4 hours. During sintering, Li₂CO₃ reacted with Bi_1.5Zn_1.0Nb_1.5O₇, resulting in the formation of Bi₂Zn_2/3Nb_4/3O₇, and LiZnNbO₄. The resulting sintered body exhibited a relative sintering density exceeding 96% of the theoretical density. By altering the initial Li₂CO₃ content (x) and consequently modulating the volume fraction of Bi_1.5Zn_1.0Nb_1.5O₇, Bi₂Zn_2/3Nb_4/3O₇, and LiZnNbO₄ in the final sintered body, a sample with high dielectric constant (ε_r), low dielectric loss (tan δ), and the temperature coefficient of dielectric constant (TCε) characterized by NP0 specification (TCε ≤ ±30 ppm/℃) was achieved. As the Li₂CO₃ content increased from x=0.03 mol to x=0.15 mol, the volume fraction of Bi₂Zn_2/3Nb_4/3O₇ and LiZnNbO₄ in the composite increased, while the volume fraction of Bi_1.5Zn_1.0Nb_1.5O₇ decreased. Consequently, the dielectric constant (εr) of the composite materials varied from 148.38 to 126.99, the dielectric loss (tan δ) shifted from 5.29×10^-4 to 3.31×10^-4, and the temperature coefficient of dielectric constant (TCε) transitioned from -340.35 ppm/℃ to 299.67 ppm/℃. A dielectric exhibiting NP0 characteristics was achieved at x=0.09 for Li₂CO₃, with a dielectric constant (ε_r) of 143.06, a dielectric loss (tan δ) value of 4.31×10^-4, and a temperature coefficient of dielectric constant (TCε) value of -9.98 ppm/℃. Chemical compatibility experiment with Ag electrode revealed that the developed composite material exhibited no reactivity with the Ag electrode during the co-firing process.

• Clean Technology
• /
• v.24 no.2
• /
• pp.112-118
• /
• 2018

Thermo-responsive polymers that exhibit phase transition in response to temperature change can be used as materials for smart windows because they can control solar light transmission depending on the outside temperature. The development of thermo-responsive polymers for smart windows that can be used over a wide temperature range is desirable. To obtain high performance smart windows materials, three-dimensional thermo-responsive poly(N-isopropylacrylamide) (PNIPAm) gels were prepared by free radical polymerization from monomer N-isopropylacrylamide, N, N'-methylenebis acrylamide (MBAm) as a crosslinking agent, ammonium persulfate (APS) as a strong oxidizing agent/tetramethylene diamine as a catalyst, and a mixture of two solvents (water/glycerol). This study examined the effect of glycerol content on the lower critical solution temperature (LCST), freezing temperature and the solar light transmittance of crosslinked PNIPAm gel films. The LCST and freezing temperature of PNIPAm gel films were found to be significantly decreased from 34.3 and $6.3^{\circ}C$ to 28.2 and $-6.5^{\circ}C$ with increasing glycerol content from 0 wt% to 10 wt%, respectively. It was found that the transparent PNIPAm gel films at $25^{\circ}C$ (temperature < LCST) were converted to translucent gels at higher temperature ($45^{\circ}C$) (temperature > LCST). These results suggested that the crosslinked PNIPAm gel materials prepared in this study could have high potential for application in smart glass materials.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.541-547
• /
• 2011

Nanorod-clustered $MnO_2$ precursors with ${\alpha}$-, ${\beta}$-, and ${\gamma}$-phases are synthesized by hydrothermal reaction of $MnSO_45H_2O$ and $(NH_4)S_2O_8$. The formation of nanorod-clustered ${\beta}-MnO_2$ is particularly confirmed under the conditions of high reactant concentration and hydrothermal reaction at $150^{\circ}C$. The spinel $LiMn_2O_4$ nanorod-clusters are also prepared by lithiating the $MnO_2$ precursors, varying the concentration of lithiating agent ($LiC_3H_3O_2{\cdot}2H_2O$) and heat treatment temperature, and characterized for use as cathode material of lithium-ion batteries. As a result, the nanorod-clustered $LiMn_2O_4$ prepared from the ${\beta}-MnO_2$ at higher $LiC_3H_3O_2{\cdot}2H_2O$ concentration and the annealing at $800^{\circ}C$ is proven to show the cubic spinel structure and to achieve the high initial discharge capacity of 120 mAh/g.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.5
• /
• pp.199-205
• /
• 2018

A geopolymer was produced from coal ash generated from an integrated gasification combined cycle (IGCC) plant and its water resistance was evaluated. For this purpose, the geopolymer specimens were immersed in water for 30 days to measure changes in microstructure and alkalinity of the immersion liquid. Particularly, the experiment was carried out with foaming status of the geopolymers and parameters of room temperature aging condition, and immersion time. The foamed geopolymer containing 0.1 wt% Si-sludge had pores with a diameter of 1 to 3 mm and exhibited excellent foamability. Also, the calcium-silicate-hydrate crystal phase appeared in the foamed geopolymer. In the geopolymer immersion experiment, the pH of the immersion liquid increased with time, because the un-reacted alkali activator remained was dissolved in the immersion liquid. From the pH change of the immersion liquid, it was found that geopolymer reaction in the foamed specimen was completed faster than the non-foamed specimen. Through this study, it was possible to successfully produce foamed and non-foamed geopolymers recycled from IGCC coal ash. Also the necessary data for the safe application of IGCC coal ash-based geopolymers to areas where water resistance is needed were established; for example, the process conditions for room temperature aging time, effect of foaming status, immersion time and so on.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.2
• /
• pp.256-262
• /
• 2011

Currently among the several methods to estimate an environmental impact of products, Life Cycle Assessment (LCA) technique is mostly used. The Ministry of Environment has been performed the carbon footprint labelling to give the carbon record of product by using this method. But the calculation of carbon footprint in primary agricultural product which is raw material of the processed food cannot be made because there is lack of methodology and LCI DB at agriculture sector. Therefore, LCA carried out to estimate carbon footprint, and established LCI DB for complex fertilizers (21-17-17 1 kg, 17-21-17 1 kg, 15-15-15 1 kg, Unspecified 1 kg) in the production system. The result of LCI DB analysis focussed on the GHG, and it was observed that the values of carbon footprint were $2.42E+00kg\;CO_2-eq.kg^{-1}$ for 21-17-17, $2.10E+00kg\;CO_2-eq.kg^{-1}$ for 17-21-17, $2.23E+00kg\;CO_2-eq.kg^{-1}$ for 15-15-15 and $3.56E+00kg\;CO_2-eq.kg^{-1}$ for Unspecified. For the analysis of LCIA (Life Cycle Impact Assessment) on complex fertilizers in the production system, the carbon footprint from pre-manufacturing phase is contributed to 98.96%, 98.81%, 98.88% and 99.30% on each complex fertilizer with 21-17-17, 17-21-17, 15-15-15, and Unspecified, respectively. These results will be used in basic data for estimation of agricultural greenhouse gas emissions.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.1
• /
• pp.23-32
• /
• 2018

Noerok ia a green pigment used in Joseon dynasty, and its main usage was for forming foundation layers of Dancheong, the ornamental paintings on the surface of traditional buildings in Korea, such as the Daeung-jeon(main hall) of Bulguk-sa temple. In this research, we investigated the mineralogical characteristic changes of Noerok, a traditional Korean pigment, depending on its firing temperature. The Noerok that we experimented on was mined from Noeseong Mountain, Pohang where it is locally reserved. The major composition mineral is Celadonite, and the main constituent elements are Fe, Si, K and Mg, that refers to the existence of Fe-rich mica. As a result of phased firing experiment from $105^{\circ}C$ to $1000^{\circ}C$, the color was changed from green to pale green, then to brown, and finally to red in order. In the thermal analysis, endothermic reaction induced by the dehydration of crystalline water was confirmed at around $616^{\circ}C$. In the mineralogical change, the crystal surface [($11{\bar{1}}$) and ($02{\bar{1}}$)] of the mineral collapsed at temperatures above $600^{\circ}C$, and iron oxide was formed at $1000^{\circ}C$ or higher. Therefore, it is estimated that the crystallization temperature of Noerok is below $600^{\circ}C$, and it is also considered that it has undergone the alteration phase up to stage I, based on the presence of only a celadonite.