• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.107-109
• /
• 2003

Single phase induction motor is directly used usual source, it can be a source of an appliance such as mechanical fan, refrigerator, washing machine, etc. Especially capacitor-run single phase induction motor is suitable to make more inexpensive and high efficient products because it is more high efficiency, and good to start than other single phase induction motors. Generally, voltage and current of capacitor-run single phase induction motor transfer to the part of positive phase and negative phase based on two motor theory. In this paper, we simulate the torque characteristics to capacitance variation from single phase induction motor's equivalent circuit. Through the test using the real motor, we compare and investigate the maximum torque of run state related with capacitance and the adequacy of the converted model.

• Korea-Australia Rheology Journal
• /
• 제18권4호
• /
• pp.183-189
• /
• 2006

High internal phase emulsions are highly concentrated emulsion systems consisting of a large volume of dispersed phase above 0.74. The rheological properties of high internal phase water-in-oil emulsions were measured conducting steady shear, oscillatory shear and creep/recovery experiments. It was found that the yield stress is inversely proportional to the drop size with the exponent of values between 1 and 2. Since the oil phase contains monomeric species, microcellular foams can easily be prepared from high internal phase emulsions. In this study, the microcellular foams combining a couple of thickeners into the conventional formulation of styrene and water system were investigated to understand the effect of viscosity ratio on cell size. Cell size variation on thickener concentration could be explained by a dimensional analysis between the capillary number and the viscosity ratio. Compression properties of foam are important end use properties in many practical applications. Crush strength and Young's modulus of microcellular foams polymerized from high internal phase emulsions were measured and compared from compression tests. Of the foams tested in this study, the foam prepared from the organoclay having reactive group as an oil phase thickener showed outstanding compression properties.

• 조명전기설비학회논문지
• /
• 제12권1호
• /
• pp.26-34
• /
• 1998

본 연구에서는 복권형 하이브리드 스테핑 전동기의 Lead Angle에 따른 순시 상전류값의 변화를 보이고 이를 실험적으로 확인하였다. Lead Angle에 따른 순시 상전류값의 변화는 상권선이 여기된 시점에서의 회전자 위치에 대한 정보를 제공한다. 따라서 복권형 하이브리드 스테핑 전동기의 폐루프 운전을 위한 회전자 위치검출 방법으로서 전동기의 순시 상전류를 이용할 수 있음을 보였다. 복권형 하이브리드 스테핑 전동기의 모델링을 통해 Lead Angle 함수로 주어지는 순시 상전류 식을 제시하였으며, 컴퓨터 시뮬레이션을 통해 순시 상전류와 회전자 자극위치와의 관계를 도시하고 분석하였고, 상전압 인가후 $\pi/2$ 시점에서의 순시 상전류값을 측정하여 회전자 자극위치 정보를 얻을 수 있음을 실험적으로 확인하였다.

• 대한기계학회논문집B
• /
• 제21권10호
• /
• pp.1350-1362
• /
• 1997

An experimental study has been performed on vortex pairing under fundamental and subharmonic forcing with controlled initial phase differences through hot-wire measurements and a multi-smoke wire flow visualization. For the range of St$_{D}$ < 0.6, vortex pairing was controlled by means of fundamental and subharmonic forcing with varying initial phase differences. Much larger mixing rate was achieved by two-frequency forcing with a proper phase difference than one frequency forcing. As St$_{D}$ decreased, vortex pairing was limited to a narrow region of the initial phase difference between two disturbances and higher amplitudes of the fundamental and its subharmonic at the nozzle exit were required for more stable pairing. As the amplitude of the subharmonic at the nozzle exit increased for fixed St$_{D}$ and fundamental amplitude, the distribution of the subharmonic mode against the variation of the initial phase difference changed from a sine function form into a cusp-like form. Thus, vortex pairing can be controlled more precisely for the former case. For St$_{D}$ > 0.6, non-pairing advection of vortices due to the improper phase difference was sometimes observed in several fundamental forcing amplitudes when only the fundamental was applied. However, when its subharmonic was added, vortex pairing readily occurred. As the initial amplitude of this subharmonic increased, the position of vortex pairing moved upstream. This was thought to be due to the fact that the variation of the initial phase difference between the fundamental and its subharmonic has less effects on vortex pairing in the region of fundamental-only vortex pairing.pairing.

• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.459-464
• /
• 2009

가압 삼상슬러리 기포탑에서 탑의 직경변화에 따라 기체-액체 물질전달 특성을 고찰하였다. 기체 유속, 운전압력, 액체점도, 슬러리상에서 고체입자의 양 그리고 탑의 직경이 기체-액체 부피물질전달계수에 미치는 영향을 결정하였다. 운전변수들이 물질전달계수에 미치는 영향은 기포탑의 직경이 변화함에 따라 다르게 나타났다. 기체-액체 부피물질전달계수는 기체유속이나 운전압력이 증가함에 따라 증가하였으나, 기포탑의 직경, 액체의 점도 그리고 슬러리상에 고체입자의 농도가 증가함에 따라 감소하였다. 기체-액체 물질전달계수가 기체유속 증가에 따라 증가하는 경향과 액체의 점도가 증가함에 따라 감소하는 경향은 기포탑의 직경이 증가함에 따라 점차 감소하였다. 그러나, 운전압력과 슬러리상에 포함된 고체입자의 농도가 기체-액체 물질전달계수에 미치는 영향은 기포탑의 직경이 변화함에 따라 큰 영향을 받지 않았다. 본 연구의 실험범위에서 기체-액체 물질전달계수는 다음 식과 같은 실험변수의 상관식으로 나타낼 수 있었다. $k_La=0.02D^{-0.26}U_G^{0.28}P^{0.43}{\mu}_L^{-0.04}S_c^{-0.35}$.

• 한국산업융합학회 논문집
• /
• 제23권3호
• /
• pp.499-505
• /
• 2020

Capacitor-run single-phase induction motor is cheaper than motors that use permanent magnets and is widely used in home appliances and industries based on relatively high durability and productivity. It can also be operated by line. However speed cannot be controlled because the line frequency is free. In this paper we dealt pole change method one of the method controlling speed of capacitor-run single-phase induction motor. The conventional pole change method is difficult to improve the power and efficiency of the motor because the composition of the pole change device is complex and do not have enough area of the windings because of windings not used according to the driving conditions. In this paper, we proposed the pole change method that is used main windings and auxiliary windings at 4 poles operation and used auxiliary windings as compensation windings at 2 poles operation. The proposed method was verified through finite element analysis.

• 전기학회논문지
• /
• 제64권9호
• /
• pp.1315-1322
• /
• 2015

This paper proposes an active islanding detection method for the BESS (Battery Energy Storage System) with 3-phase inverter which is connected to the AC grid. The proposed method adopts the DDSRF (Decoupled Double Synchronous Reference Frame) PLL (Phase Locked-Loop) so that the independent control of positive-sequence and negative-sequence current is successfully carried out using the detected phase angle information. The islanding state can be detected by sensing the variation of negative-sequence voltage at the PCC (Point of Common Connection) due to the injection of 2-3% negative-sequence current from the BESS. The proposed method provides a secure and rapid detection under the variation of negative-sequence voltage due to the sag and swell. The feasibility of proposed method was verified by computer simulations with PSCAD/EMTDC and experimental analyses with 5kW hardware prototype for the benchmark circuit of islanding detection suggested by IEEE 1547 and UL1741. The proposed method would be applicable for the secure detection of islanding state in the grid-tied Microgrid.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권6호
• /
• pp.770-777
• /
• 1999

In this study a phase diagram has been used to investigate the unsteadiness of two-dimensional lid-driven closed flows within a square cavity for twelve Reynolds numbers; $7.5{\times}10^3,\; 8{\times}10^3,\; 8.5{\times}10^3,\; 9{\times}10^3,\; 9.5{\times}10^3,\; 10^4,\;1.5{\times}10^4,\;2{\times}10^4,\; 3{\times}10^4,\; 7.5{\times}10^4$ and $10^5$. The results indicate that the first critical Reynolds number at which the flow unsteadiness of sinusoidal fluctuation appears from the temporal variation of total kinetic energy curves is assumed of sinusoidal fluctuation appears form the temporal variation of total kinetic energy curves is assumed to be in the neigh-bourhood of $Re=8.5{\times}10^3$ The second critical Reynolds number where the periodic amplitude and frequency collapse to random disturbance being existed around $Re=1.5{\times}10^4$ The exponentially decreasing vortices formed at the lower two corners are found commonly at the time-mean flow pattern of $Re=3{\times}10^4$.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.238-243
• /
• 2003

The solar cells should be operated at the maximum power point because its output characteristics are greatly fluctuated on the variation of insolation, temperature and load. The output power of solar cell is DC, therefore it is necessary to install an inverter among electric power converts. The inverter have to supply a sinusoidal current and voltage to the load and the interactive utility line. In the paper, the proposes a photovoltaic system designed with a step up chopper and single phase PWM voltage source inverter. Synchronous signal and control signal was processed by microprocessor for stable modulation. The step up chopper operates in continuous mode by adjusting the duty ratio so that the photovoltaic system tracks the maximum power point of solar cell without any influence on the variation of insolation and temperature because solar cell has typical dropping character. The single phase PWM voltage source inverter consists of complex type of electric power converter to compensate for the defect, that is, solar cell cannot be developed continuously by connecting with the source of electric power, from 10 to $20\%$. The single phase PWM voltage source inverter operates in situation that its output voltage is in same phase with the utility voltage. The inverter supplies an ac power with high factor and low level of harmonics to the load and the utility power system.

• 한국통신학회논문지
• /
• 제29권7A호
• /
• pp.719-726
• /
• 2004

광섬유의 분산이 균일하지 않다는 가정 하에 색 분산과 자기 위상 변조 (SPM : Self Phase Modulation) 현상에 의해 왜곡된 WDM 채널의 보상 특성을 수치적으로 살펴보았다. 본 연구에서 사용한 보상 기법은 전체 전송 링크 중간에 광 위상 공액기 (OPC： Optical Phase Conjugator)를 두어 보상하는 MSSI (Mid-Span Spectral Inversion)이다. OPC를 중심으로 두 광섬유 구간의 분산 계수 분포가 변동하면서 서로 일치하지 않은 경우에도 전송 채널의 입력 전력을 적절히 조절함으로써 MSSI를 통해 장거리 전송이 가능하다는 것을 알 수 있었다. 즉 장거리 WDM 시스템에 MSSI를 적용하게 되면 전송 선로 곳곳에 필요한 보상기(compensator) 등을 없앨 수 있고, 결과적으로 시스템 비용을 절감할 수 있을 것으로 기대된다.