• 한국광물학회지
• /
• 제26권1호
• /
• pp.35-44
• /
• 2013

유사 올리빈 구조를 가지는 탄소코팅 합성 $Li^+Fe^{2+}(PO_4)^{3-}$ 분말시료에 대한 상온-고압실험을 대칭 다이아몬드 앤빌기기를 이용하여 35.0 GPa까지 시행하였다. $LiFePO_4$의 압축 데이터를 이용하여 계산된 체적탄성률은 $130.1{\pm}10.3$ GPa이다. 18 GPa 이상의 압력에서 d = 3.386 ${\AA}$ 위치에 새로운 피크가 관찰되고 35 GPa에서는 d = 2.854 ${\AA}$에 또 다른 피크가 관찰되고 있으나 주 결정구조는 사방정계인 것으로 판단된다. 압력에 대한 단위 포 부피의 압축은 M1($Li^+O_6$)의 수축이 두드러지고 M2($Fe^{2+}O_6$)와 사면체($PO_4$)의 수축은 상대적으로 작은 것으로 나타났다.

• 한국자기학회지
• /
• 제15권2호
• /
• pp.92-95
• /
• 2005

희박자성반도체 물질인 ZnO 산화물 반도체에 $^{57}Fe$를 미량 치환한 $Zn_{1-x}\;^{57}Fe_xO(X=0.01, 0.02, 0.03)$ 물질을 전통적인 고상반응법에 의하여 물질을 합성하였다. 이렇게 합성된 희박자성반도체 물질의 결정학적 및 자기적 특성을 x-선 회절(XRD), 진동시료 자화 측정 (VSM), $M\ddot{o}ssbauer$분광 실험을 통하여 연구하였다. $ZnFe_2O_4$의 스피넬 페라이트에 해당하는 이차상 생성을 진공열처리를 통하여 제거하였으며, 결정구조는 격자상수 ${\alpha}_o=3.252{\AA},\;c_o=5.205{\AA}$를 갖는 단일상의 wurzite hexagonal 구조로 결정하였다. 77 K에서의 VSM 측정결과 상자성상과 강자성상이 공존하는 결과를 확인할 수 있었으며, Fe의 치환량이 증가할수록 강자성상이 증가하는 것을 알 수 있었다. 뫼스바우어 측정 결과 4.2 K에서 강자성상에 해당하는 공명흡수선이 존재하였으며, 상온에서는 상자성에 해당하는 2개의 공명흡수선만이 존재하는 것을 알 수 있었다. 이러한 결과는 VSM 결과와 잘 일치하였다.

• 한국광물학회지
• /
• 제1권2호
• /
• pp.94-103
• /
• 1988

YAG (Yttrium Aluminum Garnet) 레이저와 다이아몬드앤빌셀 (DAC)을 이용하여 페롭스카이트 구조물질중 $BaTiO_3$와 $PbTiO_3$에 대한 상(相)전이와 $MgSiO_3$와 $(Mg_{0.87},\;Fe_{0.13})SiO_3$ 성분(成分)의 사방휘석으로부터 규산염 페롭스카이트를 합성하였다. $BaTiO_3$와 $PbTiO_3$는 실온의 2.6 GPa와 4.0 GPa에서 각각 정방정계에서 등축정계로 상(相)전이하며 고온, 고압하에서 매우 넓은 안정영역을 갖고 있다. $MgSiO_3$ 엔스테타이트를 출발물질로 하였을 경우 약 33 GPa, $1,000^{\circ}C$의 조건하에서 페롭스카이트가 주성분인데, 일메나이트, 감마스피넬, 스티쇼마이트도 부성분으로 나타난다. $(Mg_{0.87},\;Fe_{0.13})SiO_3$의 경우는 약 35 GPa와 $1,000^{\circ}C$에서 페롭스카이트상(相)이 주성분으로 나타나며, 베타스피넬, 스티쇼바이트와 본래 엔스테타이트상(相)도 유지되나, 일메나이트상(相)과 감마스피넬은 나타나지 않는다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.37.1-37.1
• /
• 2010

The multi-component olivine cathode material, $LiMn_{1/3}Fe_{1/3}Co_{1/3}PO_4$, was prepared via a novel coprecipitation method of the mixed transition metal oxalate, $Mn_{1/3}Fe_{1/3}Co_{1/3}(C_2O_4){\cdot}2H_2O$. The stoichiometric ratio and distribution of transition metals in the oxalate, therefore, in the olivine product, was affected sensitively by the environments in the coprecipitation process, while they are the important factors in determining the electrochemical property of electrode materials with multiple transition metals. The effect of the pH, atmosphere, temperature, and aging time was investigated thoroughly with respect to the atomic ratio of transition metals, phase purity, and morphology of the mixed transition metal oxalate. The electrochemical activity of each transition metal in the olivine synthesized through this method clearly was enhanced as indicated in the cyclic voltammetry (CV) and galvanostatic charge/discharge measurement. Three distinctive contributions from Mn, Fe, and Co redox couples were detected reversibly in multiple charge and discharge processes. The first discharge capacity at the C/5 rate was $140.5\;mAh\;g^{-1}$ with good cycle retention. The rate capability test showed that the high capacity still is retained even at the 4C and 6C rates with 102 and $81\;mAh\;g^{-1}$, respectively.

• 한국재료학회지
• /
• 제6권3호
• /
• pp.305-308
• /
• 1996

YxFe2-xO3(x=0.82)의 결정상 변환을 상온에서의 x선회절과 온도구간 80-541K에서의 Mossbauer 분광 방법에 의해서 연구하였다. Xtjs 회절선은 시료가 orthorhombic 결정상과 garnet 결정상이 공존하고 있으며, 공존비는 실험오차 범위내에서 garnet 구조가 orthorhombic 구조보다 우세함을 보인다. 공존상중에서 garnet 구조의 자기상 변환온도는 536$\pm$5 K로 결정하였다. Debye 모형을 이용한 Mossbauer 스펙트럼의 recoil-free fration 분석결과는 garnet 결정상내의 d자리나 a자리에 vacancy의 존재 가능성을 시사한다. 부가적으로 시료가 포함하는 각 결정상의 Debye 특성온도를 결정하였다.

• 전기화학회지
• /
• 제7권3호
• /
• pp.131-137
• /
• 2004

Sol-gel method which provides better electrochemical and physiochemical properties compared to the solid-state method was used to synthesize the material of $LiFe_yMn_{2-y}O_4$. Fe was substituted to increase the structural stability so that the effects of the substitution amount and sintering temperature were analyzed. XRD was used for the structural analysis of produced material, which in turn, showed the same cubic spinel structure as $LiMn_2O_4$ despite the substitution of $Fe^{3+}$. During the synthesis of $LiFe_yMn_{2-y}O_4$, as the sintering temperature and the doping amount of Fe(y=0.05, 0.1, 0.2)were increased, grain growth proceeded which in turn, showed a high crystalline and a large grain size, certain morphology with narrow specific surface area and large pore volume distribution was observed. In order to examine the ability for the practical use of the battery, charge-discharge tests were undertaken. When the substitution amount of $Fe^{3+}\;into\;LiMn_2O_4$ increased, the initial discharge capacity showed a tendency to decrease within the region of $3.0\~4.2V$ but when charge-discharge processes were repeated, other capacity maintenance properties turned out to be outstanding. In addition, when the sintering temperature was $800\~850^{\circ}C$, the initial capacity was small but showed very stable cycle performance. According to EVS(electrochemical voltage spectroscopy) test, $LiFe_yMn_{2-y}O_4(y=0,\;0.05,\;0.1,\;0.2)$ showed two plateau region and the typical peaks of manganese spinel structure when the substitution amount of $Fe^{3+}$ increased, the peak value at about 4.15V during the charge-discharge process showed a tendency to decrease. From the previous results, the local distortion due to the biphase within the region near 4.15V during the lithium extraction gave a phase transition to a more suitable single phase. When the transition was derived, the discharge capacity decreased. However the cycle performance showed an outstanding result.

• Macromolecular Research
• /
• 제16권7호
• /
• pp.637-643
• /
• 2008

A combination of magnetic and temperature-responsive properties in the same polymer composites is expected to increase their potential applications in the biomedical field. Accordingly, micron-sized magnetite/polystyrene/poly(2-dimethylaminoethyl methacrylate-ethyleneglycol dimethacrylate), which are abbreviated as $Fe_3O_4$/PS/P (DM-EGDM) composite polymer particles, were prepared by the seeded copolymerization of DM and EGDM in the presence of magnetite/polystyrene ($Fe_3O_4$/PS) particles. $Fe_3O_4$/PS/P(DM-EGDM) composite particles with magnetic properties showed a temperature-sensitive phase transition at approximately $31^{\circ}C$. The adsorption behavior of the low molecular weight emulsifiers and trypsin (TR) as biomolecules were examined on $Fe_3O_4$/PS/P(DM-EGDM) composite polymer particles at different temperatures. The native conformation of TR was followed by measuring the specific activity under various adsorption conditions. The activity of the adsorbed TR on composite polymer particles was higher than those of the tree TR and TR adsorbed on $Fe_3O_4$/PS particles.

• Journal of Magnetics
• /
• 제13권1호
• /
• pp.19-22
• /
• 2008

ZnO nanotips, grown on c-$Al_2O_3$ and quartz, were implanted variously with 200 keV Fe or Mn ions to a dose level of $5{\times}10^{16}cm^{-2}$. The magnetic properties of these samples were measured using a superconducting quantum interference device (SQUID) magnetometer. Fe-implanted ZnO nanotips grown on c-$Al_2O_3$ showed a coercive field width of 209 Oe and a remanent field of 12% of the saturation magnetization ($2.3{\times}10^{-5}emu$) at 300K for a sample annealed at $700^{\circ}C$ for 20 minutes. The field-cooled and the zero-field-cooled magnetization measurements also showed evidence of ferromagnetism in this sample with an estimated Curie temperature of around 350 K. The Mn-implanted ZnO nanotips grown on c-$Al_2O_3$ showed superparamagnetism resulting from the dominance of a spin-glass phase. The ZnO nanotips grown on quartz and implanted with Fe or Mn showed signs of ferromagnetism, but neither was consistent.

• Nuclear Engineering and Technology
• /
• 제56권10호
• /
• pp.4404-4411
• /
• 2024

The dissolved oxygen in a coolant can affect the oxidation properties of structural materials. A desirable oxide phase formation is achieved by manipulating the oxygen level in the coolant, which can mitigate structural material degradation in nuclear power plants. Therefore, the role of dissolved oxygen in the corrosion of structural materials in aqueous environments needs to be understood. In this study, a short-term corrosion test (up to 300 h) of Ferritic/Martensitic steels (F/M steels; FeCrW model alloys), namely, Fe12Cr1W, Fe9Cr1W, and Fe9Cr, in stagnant water at 360 ℃ was performed in a pressurized autoclave with the dissolved oxygen concentration controlled to 1 ppm or a very low level (<1 ppm). The results of the corrosion tests showed that an increase in the oxygen level in the water elevated the corrosion potential, allowing the phase transition of iron oxide from magnetite (Fe₃O₄) to hematite (Fe₂O₃), whereas there was no significant correlation between the concentrations of the alloying elements Cr and W and the oxide growth rate. In addition, hematite was found to mitigate further oxide growth. Finally, a mechanism for the growth of the initial oxide layer was proposed based on the experimental results.

• 한국세라믹학회지
• /
• 제49권3호
• /
• pp.266-271
• /
• 2012

The effect of $Bi(Mg_{1/2}Sn_{1/2})O_3$ (BMS) modification on the crystal structure, ferroelectric and piezoelectric properties of $Bi_{1/2}(Na_{0.8}K_{0.2})_{1/2}TiO_3$ (BNKT) ceramics has been investigated. The BMS-substitution induced a transition from a ferroelectric (FE) tetragonal to a nonpolar pseudocubic phase, leading to degradations in the remnant polarization, coercive field, and piezoelectric coefficient $d_{33}$. However, the electric-field-induced strain was significantly enhanced by the BMS substitution-induced phase transition and reached a highest value of $S_{max}/E_{max}$ = 633 pm/V under an applied electric field of 6 kV/mm when the BMS content reached 6 mol%. The abnormal enhancement in strain was attributed to the field-induced transition of the pseudocubic symmetry to other asymmetrical structure, which was not clarified in this work.