• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.296-303
• /
• 2003

In this paper, a design method is proposed for the reflection type phase shifter applied to the DTV(Digital TV) receiver, and a phase shifter is designed by using the design equations to satisfy the phase shifting range over 180 degrees for frequency range from 470 MHz to 860 MHz, the receiving band of DTV. From the proposed method, it is possible that the systematic design of the reflection type phase shifter with desired phase shifting range and insertion loss. In addition, it is found that the realized phase shifter satisfies the given specifications.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.96-100
• /
• 1997

The shadow moire is one of the optical techniques which is able to give contour lines of an object with respect to a master grating plane. The moire patterns are issued from the superposition of a master grating and its shadow projected on the surface of an object. In case of the classical shadow moire method, the sensitivity was a few tenths millimeters. generally, it is difficult to use a phase shift method in shadow moire because it is impossible to obtain uniform phase shifts on the whole field. But in this study we use the fact that if the depth of object is much less than the distance between the observer and the master grating, and the object is displaced perpendicularly to the grating plane, phase shifts are almost uniform. Finally we obtained a better resolution by using a phase shift procedure and applied the phase shifting shadow moire to three dimensional shape measurement.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1227-1230
• /
• 1998

Phase control methods are used to expand the sound image in general AV system. However, these methods are effective only to the signal under 1kHz, and the listener must be located in front center of the speaker system. In this paper, we realize the realtime processing system in which phase shifting method is dominant at low frequency and precedence effect is dominant at high frequency. Two sound cards are used to process the audio signal in realtime with 16 bits stereo channel of 44.1 kHz sampling frequency. And the analog circuit is designed to process the phase shifting. In experiments the usefulness of the proposed stereo system is confirmed.

• Journal of the Optical Society of Korea
• /
• v.14 no.2
• /
• pp.97-103
• /
• 2010

We propose a new technique for the optical encryption of gray-level optical images digitized into 8-bits binary data by ASCII encoding followed by QPSK modulation. We made an encrypted digital hologram with a security key by using 2-step phase-shifting digital holography, and the encrypted digital hologram is recorded on a CCD camera with 256 gray-level quantized intensities. With these encrypted digital holograms, the phase values are reconstructed by the same security key and are decrypted into the original gray-level optical image by demodulation and decoding. Simulation results show that the proposed method can be used for cryptosystems and security systems.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.38-44
• /
• 2002

The increasing use of non-linear loads such as power electronics draw highly distorted currents from the utility system High harmonics current, and voltages will cause equipment damage and disturb the plant operation. The application of phase shifting transformers can be a very cost-effective method of harmonic treatment where multiple harmonic sources ice in operation. In this paper simulation results used the EDSA harmonics analysis program verifying the effects of a phase shifting transformer for harmonic elimination are presented.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.8
• /
• pp.1530-1535
• /
• 1992

An optical method of phase shifting interferometry is presented for the 3-dimensional profile measurement of mirror surfaces with nanometer resolution. A series of optical interferometric fringes are generated by comparing the surface to be measured with a reference flat. The fringes are captured by a CCD camera and then analyzed to obtain actual surface profile. Detailed principles are described along with necessary image processing algorithms. finally, several measurement examples are discussed which were performed on lapped surfaces, hard discs, and semiconductor wafers.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.6
• /
• pp.78-83
• /
• 1999

This study discusses a non-contact optical technique, electronic speckle pattern interformetry(ESPI), that is well suited for in-plane and out-of-plane deformation measurement. However, the existing ESPI methods that are based on dual-exposure, real-time and time-average method have difficulties for accurate measurement of structure, due to irregular intensity and shake of phase. Therefore, phase shifting method has been proposed in order to solve this problem. About the method, the path of reference light in interferometry is shifted and added to least square fitting method to make the improvement in distinction and precision. This proposed method is applied to measure in -plane displacement that is compared with the previous method. Also, Used as specimen AS4/PE따 [30/=30/90]s was analyzed by ESPI based on real-time to determine the characteristics of vibration under no-load and tension. These results are quantitatively compared with those of FEM analysis inmode shapes.

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.201-207
• /
• 1999

The fiber-optical confocal scanning interference microscope with a simple configuration was constructed with a 4-port fiber-optic coupler, and the new method based on the phase shifting method was proposed for surface profiling by the system. In the method, the height of a specimen was determined from the phase of confocal beam. It was verified experimentally that the method was applicable to even the confocal interference microscope with a long-wavelength source and a low NA objective, and that the scanning time could be drastically reduced compared with the conventional method. Finally, it was found that our method is less sensitive to the variation of surface reflectivity than the conventional method.

• Current Optics and Photonics
• /
• v.7 no.6
• /
• pp.673-682
• /
• 2023

In this paper, a three-key triple data encryption algorithm (TDEA) of a digital cryptosystem based on phase-shifting interferometry is proposed. The encryption for plaintext and the decryption for the ciphertext of a complex digital hologram are performed by three independent keys called a wavelength key k₁(λ), a reference distance key k₂(d_r) and a holographic encryption key k₃(x, y), which are represented in the reference beam path of phase-shifting interferometry. The results of numerical simulations show that the minimum wavelength spacing between the neighboring independent wavelength keys is about δλ = 0.007 nm, and the minimum distance between the neighboring reference distance keys is about δd_r = 50 nm. For the proposed three-key TDEA, choosing the deviation of the key k₁(λ) as δλ = 0.4 nm and the deviation of the key k₂(d_r) as δd_r = 500 nm allows the number of independent keys k₁(λ) and k₂(d_r) to be calculated as N(k₁) = 80 for a range of 1,530-1,562 nm and N(d_r) = 20,000 for a range of 35-45 mm, respectively. The proposed method provides the feasibility of independent keys with many degrees of freedom, and then these flexible independent keys can provide the cryptosystem with very high security.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.11
• /
• pp.33-44
• /
• 1999

The boundary element method was newly implemented into an optical lithography simulator so that it could evaluate rigorously the topological effects of 2dimensional phase-shifting masks. Both transparent and periodic boundary conditions were applied for the method, and the continuity conditions were used for treating interface nodes. The accuracy of the module developed for simulating aerial images was verified by comparison with analytic solutions and published results. In addition, it was found that our simulator would be more efficient than the conventional method based on the rigorous coupled wave analysis in views of the convergence and the calculation speed. Finally, the optimal design of two phase-shifting masks was performed.