• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.4
• /
• pp.48-58
• /
• 2020

Naval weapons systems of the Republic of Korea are acquired through the Defense Planning Management System. Recently, acquisition of some naval ships have been delayed, and the causes of the delays have been recognized as inappropriate project management at the Execution Phase. However, we argue that the delay problem in naval ships acquisition should be approached, with due regard for the entire Defense Planning Management System. That is, We should try to investigate from Planning Phase to those of Programming, Budgeting and Execution Phases. Therefore, in this study, we investigated the actual cases of the delay in naval acquisition at all phases of the Defense Planning Management System. Based on the investigation, we tried to identify the naval ship Acquisition Delay Factors and find out the Weights of those factors. As the next step, we calculated the Influence Measures on the naval missions, including the Cost of Naval Capability Gap derived from the delays in acquisition of naval ships. As a final step, we calculated the Acquisition Delay Measures based on the interrelationship between the Acquisition Delay Factors and the Influence Measures. Then we evaluated and analyzed what the results stand for. Finally, we made suggestions for future improvement. The improvement suggestions we made for preventing delay in acquisition of naval ships in this study are as follows. First, we need a shift in perception. It is necessary to measure the Acquisition Delay Factors in acquiring naval ships and manage them from the Planning Phase. Second, resolution must be concerted efforts. All relevant agencies, not just a few, should work together to resolve the problems of acquisition delay. Third, analysis must be based on the accumulation of data. This allows the elaborating of naval ship Acquisition Delay Factors and Delay Measures. If this research method is applied to other military weapons systems in the future, we may be able to not just identify the Acquisition Delay Factors in acquisition of other military weapons systems, but also pursue improvement in those cases.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.2
• /
• pp.18-28
• /
• 2011

This study is aimed at the improvement of administrative operations of landscape design competitions and qualitative enhancement of design quality by mutually comparing the guidelines and entry plans. The case targeted for the current study is landscape design proposals for the Seoul Hangdong Bogeumjari Housing District recently launched within a greenbelt zone in the outskirts of Seoul. The study examines from a critical perspective the design guidelines and the contents of the three winning design proposals with a focus on whether or not they have reflected the guidelines. It was observed that many provisions of the principles and conceptual guidelines which serve as clues to the designs for winning designs proposals show the direction in which the project is to be headed It was also observed that the provisions and the way they are expressed are intertwined, while, at the same time, the guidelines were not organized or developed in an orderly manner. Such a structural pattern of the guidelines is linked to the aspects of the contents of the winning design proposals as described in the following. It is observed that guidelines related to the direction in which the design to be headed are so regulatory and lengthy that they are overly standardized. This could make it difficult to read the possibility of the alternative shifts in the winning design proposals. At the same time, the attributes of winning design proposals themselves, which require observable discriminatory superiority, could serve as a factor causing excess of meanings by jumping on the bandwagon of naming. On the contrary, where autonomy of design is guaranteed or no guidelines are provided for the winning design proposals, discriminatory differences were observed, thereby making it easy to measure them This illustrates well that guidelines and structural format should be provided through a separate undertaking that has taken into careful consideration environmental traits of the site in question, objectives required and so forth.

• Journal of Korea Water Resources Association
• /
• v.54 no.6
• /
• pp.443-452
• /
• 2021

The authors obtained the discrete hedging rule for a reservoir's water supply operation by applying mixed-integer programming to save more water by earlier rationing of water supply for a drought period. The 'water supply adjustment guide' is the current operational method applied to the multipurpose reservoirs, and it was derived by a simulation method. Applying the two rules to the Hapcheon multipurpose dam's reservoir simulations with the inflow record from 2003 to 2018, the water supply deficit occurred for the long drought from 2015 to 2018. Especially, the no water supply or intermittent water supply persisted for the second half of 2017. The water supply adjustment guide had the 'normal water supply recovery threshold on storage,' which resulted in the water supply being unavailable in July 2017; then, the water supply suspension occurred until January 2018, when the reservoir storage was greater than the normal water supply recovery threshold. Despite the storage increasing due to the inflow of water into the reservoir, the suspension occurrence needs to be improved in practice. The current water supply adjustment guide and the discrete hedging rule for a reservoir's water supply operation are useful and realistic as the reservoir operation guide, which shows the concept of reducing water supply during the drought phase as scientific figures. However, to improve the reservoir simulation results, which do not provide any or intermittent water for several months, it is necessary to increase the current water supply reduction for drought phases.

• Korean Institute of Interior Design Journal
• /
• v.24 no.2
• /
• pp.189-196
• /
• 2015

In case of Senior Hospitals, meticulous care is required in both amount and quality of natural lighting because of the semi-long term residence of patients. Natural lighting has a huge impact on the physical and psychological part for the seniors. Likewise, natural lighting is an important factor considered for hospital design because it can also effect hospitalization period of patients. Research subject was K Senior Hospital which was determined as the courtyard-type building made to provide healing environment through natural lighting. Analysis was performed by dividing the space of K Senior Hospital into Central Treatment Department directly used by patients, Outpatient Department(OPD), Ward Department, Common Use Department. Research was carried out in two ways of integration value analysis using SPACE SYNTAX and illumination intensity analysis using ECOTECT. K Senior Hospital intended to actively let in natural light through courtyard and to make patients exposed to natural light when they walk along the circuit corridor built around the courtyard. This environmental consideration affected the utilization rate of Common Use Department and residence time of patients raising the average of Common Use Department on every floor. As a resuit of this study presenting type C and type D, part of four types of illumination intensity, takes higher percentage of almost every spaces compare to the others therefore K Senior Hospital was designed on the assumption of healing environment composition through natural light. The result of this research would be used meaningfully in the space programming phase of Senior Hospitals in the future. Utilization rate can be adjusted using illumination intensity value in the space that integration rate should be planed to be high. The use(purpose) of space and integration rate can be used as a guideline to set illumination intensity of natural.

• Earthquakes and Structures
• /
• v.19 no.1
• /
• pp.17-28
• /
• 2020

In this paper, a modified and improved seismic isolation system called suspension columns for seismic isolation was investigated. An experimental study of the proposed isolation method, together with theoretical and numerical analyses, has thoroughly been conducted. In the proposed method, during the construction of the foundation, some cavities are created at the position of the columns inside the foundation and the columns are placed inside the cavities and hanged from the foundation by flexible cables rather being directly connected to the foundation. Since the columns are suspended and due to the gap between the columns and walls of the cavities, the structure is able to move freely to each side thus, the transmitted seismic actions are reduced. The main parameter of this isolation technique is the length of the suspension cable. As the cable length is changed, the natural frequency of the structure is also changed, thus, the desired frequency can be achieved by means of an appropriate cable length. As the experimental phase of the study, a steel frame structure with two floors was constructed and subjected to the acceleration of three earthquakes using a shaking table with different hanging cable lengths. The structural responses were recorded in terms of acceleration and relative displacement. The experimental results were compared to the theoretical and numerical ones, obtained from the MATLAB programming and the finite element software ABAQUS, showing a suitable agreement between them. The results confirm the effectiveness of the proposed isolation method in reducing the seismic effects on the structure.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.330-339
• /
• 2008

Ground-based interceptors(GBI) comprise a major element of the strategic defense against hostile targets like Intercontinental Ballistic Missiles(ICBM) and reentry vehicles(RV) dispersed from them. An optimum design of the subsystems is required to increase the performance and reliability of these GBI. Propulsion subsystem design and optimization is the motivation for this effort. This paper describes an effort in which an entire GBI missile system, including a multi-stage solid rocket booster, is considered simultaneously in a Genetic Algorithm(GA) performance optimization process. Single goal, constrained optimization is performed. For specified payload and miss distance, time of flight, the most important component in the optimization process is the booster, for its takeoff weight, time of flight, or a combination of the two. The GBI is assumed to be a multistage missile that uses target location data provided by two ground based RF radar sensors and two low earth orbit(LEO) IR sensors. 3Dimensional model is developed for a multistage target with a boost phase acceleration profile that depends on total mass, propellant mass and the specific impulse in the gravity field. The monostatic radar cross section (RCS) data of a three stage ICBM is used. For preliminary design, GBI is assumed to have a fixed initial position from the target launch point and zero launch delay. GBI carries the Kill Vehicle(KV) to an optimal position in space to allow it to complete the intercept. The objective is to design and optimize the propulsion system for the GBI that will fulfill mission requirements and objectives. The KV weight and volume requirements are specified in the problem definition before the optimization is computed. We have considered only continuous design variables, while considering discrete variables as input. Though the number of stages should also be one of the design variables, however, in this paper it is fixed as three. The elite solution from GA is passed on to(Sequential Quadratic Programming) SQP as near optimal guess. The SQP then performs local convergence to identify the minimum mass of the GBI. The performance of the three staged GBI is validated using a ballistic missile intercept scenario modeled in Matlab/SIMULINK.

• International Journal of High-Rise Buildings
• /
• v.7 no.2
• /
• pp.145-151
• /
• 2018

Newly-designed high-rise buildings, both in China and abroad, have demonstrated new innovations from the creative concept to the creative method. from the creative concept to the creative method. At the same time, digital technology has enabled more design freedom in the vertical dimension. "Twisting" has gradually become the morphological choice of many city landmark buildings in recent years. The form seems more likely to be driven by the interaction of aesthetics and structural engineering. Environmental performance is often a secondary consideration; it is typically not simulated until the evaluation phase. Based on the research results of "DigitalFUTURE Shanghai 2017 Workshop - Wind Tunnel Visualization", an approach that can be employed by architects to design environmental-performance buildings during the early stages has been explored. The integration of a dynamic form-finding approach (DFFA) and programming transforms the complex relationship between architecture and environment into a dialogue of computer language and dynamic models. It allows the design to focus on the relationship between morphology and the surrounding environment, and is not limited to the envelope form itself. This new concept of DFFA in this research consists of three elements: 1) architectural form; 2) integration of wind tunnel and dynamic models; and 3) environmental response. The concept of wind tunnel testing integrated with a dynamic model fundamentally abandons the functional definition of the traditional static environment simulation analysis. Instead it is driven by integral environmental performance as the basic starting point of morphological generation.

• Journal of Internet Computing and Services
• /
• v.15 no.1
• /
• pp.13-27
• /
• 2014

Agile methodologies have gained recognition as efficient development processes through their quick delivery of software, even under time constraints. However, like other agile methods such as Scrum, Extreme Programming (XP) and The Dynamic Systems Development Method (DSDM), Feature Driven Development (FDD) has been criticized due to the unavailability of security elements in its twelve practices. In order to examine this matter more closely, we conducted a systematic literature review (SLR) and studied literature for the years 2001-2012. Our findings highlight that, in its current form, the FDD model partially supports the development of secure software. However, there is little research on this topic, as detailed information about the usage of secure software is rarely published. Thus, we have been able to conclude that the existing five phases of FDD have not been enough to develop secure software until recently. For this reason, security-based phase and practices in FDD need to be proposed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.344-357
• /
• 2015

With the increase in a number of access technologies and data rates, a continuous connection among different networks is demand of the future wireless networks. In the last decade, user connectivity among different access networks remained a challenging job. Therefore, in this article, we proposed a user-centric and user-perspective based network selection mechanism for fast handover management in heterogeneous wireless networks. The proposed scheme selects the most appropriate network among available networks on the basis of resources i.e. cost, data rate, and link quality. Initially, we load the Media Independent Information Service (MIIS) with the information of cost and data rate provided by different network operators. Similarly, Mobile Node (MN) is also loaded with the user preferred cost and data rate for different applications. The MN obtains the information of cost and data rate from MIIS server upon a predefined threshold, and make a decision for handover according to its current cost and data rate. Furthermore, we employ an optimal threshold mechanism for initiation of the handover execution phase to minimize false handover indications. The proposed scheme is based on a survey for network selection and its implementation in C programming language to validate its performance and accuracy. The simulation result shows that the proposed scheme performs superior then the schemes present in the current literature.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.3
• /
• pp.731-746
• /
• 1997

The usage of object models for the development of software has been frowung due to the prevalence of the ob-ject oriented paradigm.The object moedels produced as results of requirments analysis and design activities are vety veneficial to the implementation phase.It is even possible for source code to be genrated automatically if object models are concrete enough.Therefore system analyzers and desingners should make an dffort to refine theabstrace ogject model defined at.an early stage in order to achieve a more conrete object model.In general,re-fining an abstrace object model into a concrete model depends too much on the desigver's infromal experience.In this paper,we persent the refinement techniques required for concreting an abstract object model bassed on OMT(Object Modeling Technique)'s notation,We will discuss the definition of the abstraction level of an object model and the transformational rules of refinement.These transformational rules are currently applied to the design of a software tool,named Process Modeler,which is a major component of the software development process modeling system for ICS(Information Communication Service). Finally we can achieve a concrete object model which can easily be translated into C++ source code.