• 한국음향학회지
• /
• 제30권8호
• /
• pp.436-445
• /
• 2011

본 논문에서는 2-2형 압전복합체의 등가 물성 도출에 관해 연구하였다. 먼저 2-2 압전복합체의 특성 변화를 유한요소법으로 해석하였고, 해석 결과와 2-2 압전복합체 시제작품의 특성 측정 결과를 비교하여 유한요소해석의 타당성을 검증하였다. PZT-5H와 고분자재료로 구성된 압전복합체의 단일상 등가물성은 Asymptotic Averaging Method를 이용하여 도출하였고, 도출된 물성을 다양한 진동 모드의 단일상 공진자 유한요소 모델에 대입한 후 완전한 2-2 압전복합체와의 임피던스 스펙트럼 차이를 최소 자승법을 이용하여 보정함으로써, 도출된 등가 물성값의 정확성을 향상시켰다. 본 연구에서 도출한 2-2 압전복합체의 등가 물성은 향후 다양한 음향 센서의 설계에 유용하게 사용될 수 있을 것이다.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.559-568
• /
• 2014

Induction motors are critical components in industrial processes since their failure usually lead to an unexpected interruption at the industrial plant. The studies of induction motor behavior during abnormal conditions and the possibility to diagnose different types of faults have been a challenging topic for many electrical machine researchers. In this regard, an efficient and new method to detect the induction motor-fault may be the application of the Time Synchronous Averaging (TSA) to the stator current Park's Vector. The aim of this paper is to present a methodology by which defects in a three-phase wound rotor induction motor can be diagnosed. By exploiting the cyclostationarity characteristics of electrical signals, the TSA method is applied to the stator current Park's Vector, allowing the monitoring of the induction motor operation. Simulation and experimental results are presented in order to show the effectiveness of the proposed method. The obtained results are largely satisfactory, indicating a promising industrial application of the hybrid Park's Vector-TSA approach.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.77-82
• /
• 2013

By using simulation, compensating characteristics of a voltage sag compensator utilizing single-phase matrix converter is examined. System configuration is described and mathematical model of single-phase matrix converter is derived by using the state space averaging method. In addition, the single-phase matrix converter is stabilized by phase-lead compensation. Finally, compensating characteristics of the compensator is investigated for 500 W R-L load and it is demonstrated that the compensator can operate correctly for loads for the range of power factor 0.6 (lagging) - 0.8 (leading) and for up to 50% voltage sag.

• 한국유체기계학회 논문집
• /
• 제5권3호
• /
• pp.15-24
• /
• 2002

This paper presents an experimental study on the unsteady flow phenomena such as leakage flow and rotating stall which have influences on the performance and stability of an axial flow fan. For this study, unsteady pressure were measured using high frequency pressure transducers mounted on the easing wall of rotor passage and analyzed by Double Phase-Locked Averaging Technique. As the flow rate was reduced to near stall point, the pressure difference between the pressure and the suction side of the blade was increased especially new the leading edge and the lowest pressure zone of suction side was gradually developed. From the result of unsteady pressure field on the casing wall, one period of rotating stall was divided into three zones and the flow characteristics on each zone were described in detail.

• 자원환경지질
• /
• 제12권4호
• /
• pp.197-206
• /
• 1979

Sangdong scheelite deposit is confirmed to have been formed by replacement of limestone beds by metasomatic mineralization. Mineralogical zonal distribution and filling temperatures are related with order of its formation and tungsten mineralization. The first formed garnet-pyroxene zone, left in the margins of the ore body, shows the highest filling temperature of fluid inclusions in pyroxene, averaging $420^{\circ}C$. The central part of the ore body, mainly composed of quartz-mica-scheelite, shows higher fi11ing temperatures of fluid inclusions in quartz, than hornblende-quartz-scheelite zone surrounding the quartz-mica-scheelite zone, averaging $240^{\circ}C$. The distribution of highter filling temperatures above average temperature is applicable to the richest part of scheelite distribution. Generally scheelite shows higher filling temperature by about 20 to $100^{\circ}C$ than quartz in a given sample. The crystallization temperature of the main phase of scheelite deposition is $311^{\circ}C$ at the pressure of 230 to 500 bars at Sangdong area. Gas-rich inclusions in the pyroxene are homogenized into either gas or liquid phase or into both phases in a given crystal of the pyroxene, which suggests boiling at the formation of skarn.

• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.59-67
• /
• 2006

Evolution of the unsteady three-dimensional tip vortex in the wake field of a rectangular NACA 0012 hydrofoil in pitching motion is investigated. Measurements were made in CWC using PIV. A hydrofoil has an aspect ratio of 5 with chord length of 1 Oem. Pitching angle and mean angle of attack were set to $\pm$ $5^{\circ}$ and $10^{\circ}$, respectively. Frequency of oscillation was varied from 0.1 Hz to 1 Hz in order to study the effect of unsteadiness imposed by various frequencies, which correspond to the reduced frequency of K=0.1, 0.21, 0.52 and 1.05. Reynolds number based on chord length and free-stream velocity was $30\times$$10^{4}$ Phase-averaging technique was employed. Unsteadiness and variation of the size and characteristics of tip vortex at different reduced frequency were discussed.

• 한국광학회지
• /
• 제17권6호
• /
• pp.514-518
• /
• 2006

높은 안정도를 가지는 100 MHz의 RF 신호를 23 km의 광섬유망을 통하여 전송하였다. 진동과 온도 변화에 의하여 생기는 광섬유 전송과정에서의 위상 잡음을 측정하고 이를 보상하는 회로를 구성하였다. 광섬유 잡음이 제거되었을 때, RF 신호 전송의 상대주파수 불안정도는 1초 평균시간에서 $6{\times}10^{14}$, 10000초 평균시간에서 $2{\times}10^{-17}$으로서 기준 RF 신호의 안정도와 거의 같은 수준으로 광섬유를 통하여 RF를 전송할 수 있었다. 잡음 보상에 의하여 단측파대 위상잡음은 푸리에 주파수 1 kHz 이하에서 20 dB 이상 감소하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권5호
• /
• pp.230-237
• /
• 2003

Current mode control has been used for DC to DC converters for over twenty years. There are many different control schemes which use the inductor current signal in one way or another to control the DC to DC converter. In this paper, the state space averaging technique is applied for the analysis of flyback type current mode control circuit. We made real converter for the guarantee of stable output characteristic and proper design of feedback circuit. The validity of proposed method is verified from test result. The improvement of stability is confirmed by sinusoidal signal injection method with isolated transformer. It is known that phase margin is sufficient and gain crossover frequency fc is early 1/5 of switching frequency, fs, from the experimental result with frequency response analyzer.

• 한국소음진동공학회논문집
• /
• 제13권4호
• /
• pp.317-322
• /
• 2003

Torsional oscillations of a system incorporating a Hooke's joint are investigated by adopting a nonlinear 2-degree-of-freedom model. Linear and Van der Pol transformations are applied to obtain the equations of motion to which the method of averaging can be readily applied. Various subharmonic and combination resonances are identified with the conditions of their occurrences. Applying the method of averaging leads to the reduced amplitude- and phase-equations of motion, of which constant and periodic solutions are obtained numerically. The periodic solution which emerges from Hopf bifurcation point experiences period doubling bifurcation leading to infinite solution rather than chaotic solution.

• ETRI Journal
• /
• 제33권1호
• /
• pp.27-31
• /
• 2011

This paper addresses estimating the frequency of a cisoid in the presence of white Gaussian noise, which has numerous applications in communications, radar, sonar, and instrumentation and measurement. Due to the nonlinear nature of the frequency estimation problem, there is threshold effect, that is, large error estimates or outliers will occur at sufficiently low signal-to-noise ratio (SNR) conditions. Utilizing the ideas of averaging to increase SNR and weighted linear prediction, an optimal frequency estimator with smaller threshold SNR is developed. Computer simulations are included to compare its mean square error performance with that of the maximum likelihood (ML) estimator, improved weighted phase averager, generalized weighted linear predictor, and single weighted sample correlator as well as Cramer-Rao lower bound. In particular, with smaller computational requirement, the proposed estimator can achieve the same threshold and estimation performance of the ML method.