• 제목/요약/키워드: Phase averaging

검색결과 125건 처리시간 0.021초

공간자기상관법 (SPAC)의 안정성과 선형 배열법과 자료 품질 지시자로 활용되는 SPAC 계수의 허수 성분에 대한 실험 (Experiments on the stability of the spatial autocorrelation method (SPAC) and linear array methods and on the imaginary part of the SPAC coefficients as an indicator of data quality)

  • Margaryan, Sos;Yokoi, Toshiaki;Hayashi, Koichi
    • 지구물리와물리탐사
    • /
    • 제12권1호
    • /
    • pp.121-131
    • /
    • 2009
  • 최근 상시 진동 탐사법은 횡파 속도 구조의 규명을 위하며 이용되고 있다 상시 진동 탐사법 중 공간자기상관(SPAC)법은 적어도 3 혹은 4개의 수신기에서 동시에 기록된 자료를 이용한다. 2sSPAC과 선형 배열 상시 진동법과 같은 수정된 SPAC법은 2개의 수신기 자료만 이용하여 횡파 속도를 추정할 수 있지만, 1.0 Hz 이상의 주파수 대역에 대한 공간 자기상판 계수가 불안정해지는 문제점을 가지고 있다. 4개의 서로 다른 크기의 삼각형 배열과 4개의 같은 크기의 삼각형 및 선형 배열을 이용한 상시 진동 측정치에 근거하여, 2 Hz 에서 4 Hz 혹은 5 Hz주파수 대역에 대한 SPAC 계수의 안정성을 증명하였다. SPAC 계수를 Bessel 함수로 회귀하는 방식으로 획득되는 위상속도는 5 Hz까지 일관성을 보여주었다. 공간평균법을 이용한 선형배열의 경우를 제외하고, 모든 자료는 SPAC법으로 처리되었다. 평행탄성파법 자료가 있는 시추공 주변에서 상시 진동 배열을 순차적으로 다른 시간에 적용하였다. 자료의 품질을 나타내는 지시자로 SPAC 계수의 허수 성분을 이용하였다. 자기상관 스펙트럼의 변화량 (어떠한 경우에는 기록된 파동장에 대한 육안 검사)에 근거하여, 측정된 자료를 '신뢰성있는(reliable)'과 '신뢰성이 없는(unreliable)'로 구분하였다. 그 후, 'reliable'과 'unreliable'로 구분된 자료와 모든 자료에 대하여 SPAC 스펙트럼의 허수 성분을 계산하고 비교하였다. 측점의 방위각 분포가 불충분한 경우 (선형 배열), 허수 성분 곡선은 불안정한 형태를 나타내었고, 이러한 결과는 불충분한 공간평균의 지시자로 간주할 수 있음을 의미한다. 하지만, 측정된 파동장이 낮은 일관성을 나타낼 경우에도 허수성분 곡선은 주목할 만한 불안정성을 나타내지 않았다.

소수성 및 친수성 담체를 이용한 Trickling Bed Biofilter의 생물학적 수소생산 (The Fermentative Hydrogen Production in Trickling Bed Biofilter Filled with Hydrophilic-and Hydrophobic-Media)

  • 전병승;이선미;김용환;구만복;채희정;상병인
    • 한국수소및신에너지학회논문집
    • /
    • 제17권4호
    • /
    • pp.379-388
    • /
    • 2006
  • Two mesophilic trickling bed bioreactors filled with two different types of media, hydrophilic- and hydrophobic-cubes, were designed and conducted for hydrogen production under the anaerobic fermentation of sucrose. Each bioreactor consisted of the column packed with polymeric cubes and inoculated with heat-treated sludge obtained from anaerobic digestion tank. A defined medium containing sucrose was fed by the different hydraulic retention time(HRT), and recycle rate. Hydrogen concentrations in gas-phase were constant, averaging 40% of biogas throughout the operation. Hydrogen production rate was increased till $10.5\;L{\cdot}h^{-1}{\cdot}L^{-1}$ of bioreactor when influent sucrose concentrations and recycle rates were varied. At the same time, the hydrogen production rate with hydrophobic media application was higher than its hydrophilic media application. No methane was detected when the reactor was under a normal operation. The major fermentation by-products in the liquid effluent of the both trickling biofilters were acetate, butyrate and lactate. In order to run in the long term operation of both reactor filled with hydrophilic and hydrophobic media, biofilm accumulation on hydrophilic media and biogas produced should be controlled through some process such as periodical backwashing or gas-purging. Four sample were collected from each reactor on the opposite hydrogen production rate, and their bacterial communities were compared by terminal restriction fragment length polymorphism (T-RFLP) analysis of PCR products generated using bacterial 16s rRNA gene primers (8f and 926r). It was expressed a marked difference in bacterial communities of both reactors. The trickling bed bioreactor with hydrophobic media demonstrates the feasibility of the process to produce hydrogen gas. A likely application of this reactor technology can be hydrogen gas recovery from pre-treatment of high carbohydrate-containing wastewaters.

Generation of Ionospheric Delay in Time Comparison for a Specific GEO Satellite by Using Bernese Software

  • Jeong, Kwang Seob;Lee, Young Kyu;Yang, Sung Hoon;Hwang, Sang-wook;Kim, Sanhae;Song, Kyu-Ha;Lee, Wonjin;Ko, Jae Heon
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제6권3호
    • /
    • pp.125-133
    • /
    • 2017
  • Time comparison is necessary for the verification and synchronization of the clock. Two-way satellite time and frequency (TWSTFT) is a method for time comparison over long distances. This method includes errors such as atmospheric effects, satellite motion, and environmental conditions. Ionospheric delay is one of the significant time comparison error in case of the carrier-phase TWSTFT (TWCP). Global Ionosphere Map (GIM) from Center for Orbit Determination in Europe (CODE) is used to compare with Bernese. Thin shell model of the ionosphere is used for the calculation of the Ionosphere Pierce Point (IPP) between stations and a GEO satellite. Korea Research Institute of Standards and Science (KRISS) and Koganei (KGNI) stations are used, and the analysis is conducted at 29 January 2017. Vertical Total Electron Content (VTEC) which is generated by Bernese at the latitude and longitude of the receiver by processing a Receiver Independent Exchange (RINEX) observation file that is generated from the receiver has demonstrated adequacy by showing similar variation trends with the CODE GIM. Bernese also has showed the capability to produce high resolution IONosphere map EXchange (IONEX) data compared to the CODE GIM. At each station IPP, VTEC difference in two stations showed absolute maximum 3.3 and 2.3 Total Electron Content Unit (TECU) in Bernese and GIM, respectively. The ionospheric delay of the TWCP has showed maximum 5.69 and 2.54 ps from Bernese and CODE GIM, respectively. Bernese could correct up to 6.29 ps in ionospheric delay rather than using CODE GIM. The peak-to-peak value of the ionospheric delay for TWCP in Bernese is about 10 ps, and this has to be eliminated to get high precision TWCP results. The $10^{-16}$ level uncertainty of atomic clock corresponds to 10 ps for 1 day averaging time, so time synchronization performance needs less than 10 ps. Current time synchronization of a satellite and ground station is about 2 ns level, but the smaller required performance, like less than 1 ns, the better. In this perspective, since the ionospheric delay could exceed over 100 ps in a long baseline different from this short baseline case, the elimination of the ionospheric delay is thought to be important for more high precision time synchronization of a satellite and ground station. This paper showed detailed method how to eliminate ionospheric delay for TWCP, and a specific case is applied by using this technique. Anyone could apply this method to establish high precision TWCP capability, and it is possible to use other software such as GIPSYOASIS and GPSTk. This TWCP could be applied in the high precision atomic clocks and used in the ground stations of the future domestic satellite navigation system.

유당 대체제로서 쌀 가공품의 수준별 첨가가 이유자돈의 성장 능력, 설사빈도 및 분내 대장균과 휘발성 지방산에 미치는 영향 (Evaluation of Extruded Rice Product as Alternative to Lactose on Growth Performance, Diarrhea Score, Fecal E.coli and VFA in Weaning Pigs)

  • 김광호;최영환;용홍봉;주원석;손성훈;오희경;김유용
    • Journal of Animal Science and Technology
    • /
    • 제50권6호
    • /
    • pp.819-830
    • /
    • 2008
  • 본 시험은 쌀 가공품의 수준별 급여 시 유당 대체제로서의 가능성 여부를 자돈의 성장 능력과 설사빈도, 분내 대장균과 휘발성 지방산 조성 등을 통해 검증하였다. 5주간의 사양시험에서는 처리구간 체중, 일당증체량, 사료섭취량에서는 유의적인 차가 나타나지 않았지만 쌀 가공품을 유당을 대체하여 6%까지 첨가하였을 때 일당증체량과 일당사료 섭취량이 증가하는 경향을 보였다. 쌀 가공품의 첨가에 의한 설사빈도에 있어서는 L6 처리구의 설사 빈도가 낮게 나타났으나 처리구간 수치상 유의적인 차이는 보이지 않았다. 분 내 대장균 수 비교에서는 대조구에 비해 쌀 가공품의 첨가수준이 증가할수록 분 내 대장균의 수가 유의적으로 감소하는 것을 볼 수가 있었다(P<0.05). 분 내 미생물 대사산물인 휘발성 지방산 농도 비교에서는 L6 처리구가 대조구에 비해 acetate와 propionate, butyrate가 높은 수치를 보였으나 각 처리구간 유의차는 나타나지 않았다. 본 시험을 통해 이유자돈 사료 내 유당 대체제로서 쌀 가공품의 첨가는 이유자돈의 성장능력을 향상시키는 경향을 나타났으며, 설사빈도 및 분변 내 대장균 수에 대해서도 긍정적인 영향을 미치는 것으로 나타났다. 경제성 분석을 통해 급등하는 유제품의 가격과 품질을 고려할 때 쌀 가공품의 6% 대체는 자돈사료비 절감을 통한 생산비 절감효과를 나타내고 있으므로 원료사료 수입에 따른 외화절약 및 양돈 농가의 경제적 이득을 증대시킬 수 있을 것으로 사료된다. 다만 유당을 쌀 가공품으로 대체 가능한 최대 적정 비율에 대한 추가적인 보완실험은 유익한 일이 될 것이라 생각된다.

자기공명영상 시스템의 양자화잡음 분석 (Analysis of Quantization Noise in Magnetic Resonance Imaging Systems)

  • 안창범
    • Investigative Magnetic Resonance Imaging
    • /
    • 제8권1호
    • /
    • pp.42-49
    • /
    • 2004
  • 목적 : 자기공명영상시스템에서 양자화잡음을 분석하였다. 신호대양자화잡음비를 이론적으로 유도하였고 다양한 자기공명영상시스템에서 신호대양자화잡음비를 계산하였다. 이러한 계산으로부터 고자장영상시스템에서는 양자화잡음이 전체시스템의 신호대잡음비를 결정짓는 주된 잡음원이 될 수 있음을 보였다. 하드웨어의 교체없이 양자화잡음을 줄일 수 있는 방법들을 제시하였다. 대상 및 방법 : 자기공명영상에서 사용되는 Fourier 영상기법에서는 위상 및 주파수 인코딩 방법으로 자기공명신호를 공간주파수 형태의 신호로 변환하여 측정하게 된다. 따라서 공간주파수 영역에서 발생하는 양자화잡음을 재구성된 영상에서의 신호대양자화잡음비로 나타내었다. 컴퓨터 시뮬레이션 및 실험을 통하여 유도된 식의 타당성을 보였다. 결과 : 유도된 식을 이용하여 다양한 주 자장 및 수신 시스템에 대하여 신호대양자잡음비를 계산하였다. 양자화잡음은 신호의 크기에 비례하여 증가하므로 상대적으로 신호가 큰 고자장 시스템에서 보다 큰 문제점으로 부각될 수 있다. 많은 수신 시스템에서 채택하고 있는 16 bits/샘플 양자기로는 양자화 잡음이 고자장 시스템에서 기대되는 신호대잡음비의 향상을 제한할 수 있는 주된 잡음원이 될 수 있음을 보였다. 결론 : fMRI나 spectroscopy를 위하여 자기공명영상의 주 자장은 지속적으로 높아지고 있다. 고자장에서는 신호가 커지고, susceptibility와 스펙트럼의 분리가 커져서 fMRI 나 spectroscopy에 유리한 면이 많다. 양자화잡음은 신호의 크기에 비례하여 증가하기 때문에 만약 양자기의 변환 비트가 충분히 크지 않을 경우 양자화잡음이 커져 신호의 증가에 비례하는 신호대잡음비의 향상을 이룰 수 없다. 이 논문에서는 신호대양자화잡음비를 이론적으로 유도하고, 다양한 자장의 세기 및 수신 시스템에 대하여 신호대양자화잡음비를 계산함으로써 고자장에서, 특히 상대적으로 신호가 큰 3차원영상에서 , 양자화잡음이 전체 시스템의 신호대잡음비를 제한할 수 있는 주된 잡음원이 될 수 있음을 보였다. 근원적인 해결책은 아닐 수 있으나 oversampling과 에코의 센터를 비껴가는 샘플링으로 하드웨어의 향상없이 양자화잡음을 줄일 수 있는 방법을 제시하였다.

  • PDF