• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.5
• /
• pp.289-297
• /
• 1988

In this paper, the analysis of a generating torque characteristics of 2-phase induction motor driven with the phase control method is presented. The generating torque equations which represent average torque and pulsating torque are derived from the elementary machine model. The calculating equations which can get the values of average torque and pulsating torque is expressed by the parameters of the equivalent circuit of 2-phase induction motor. According to the calculating equations, these performance characteristics are investigated under various conditions. Finally, a strategy to eliminate non-linearity and pulsating torque generated in driving 2-phase induction motor with the phase control method is presented.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.3
• /
• pp.299-306
• /
• 2008

This study has been conducted to derive the bio-energy, hydrogen and methane production, from mixture of food wastewater and swine wastewater, the high strength organic wastewater and to increase effluent quality. To overcome this limitation in one-phase anaerobic process, two-phase anaerobic process combining hydrogen fermenter and methane fermenter was applied. In this system $2,323ml\;H_2/L$ was produced daily from Run II where 500 ml of heattreated sludge in methane fermenter was injected, and methane produced from methane fermenter did not show big difference regardless of the amount of returning sludge at each Run. It was concluded that the two-phase anaerobic process was the appropriat process to produce hydrogen and methane simultaneously and stably. Influent $TCOD_{Cr}$ to two-phase anaerobic process showed the range of 132~145 g/L(average 140 g/L), and effluent $TCOD_{Cr}$ range was 25~40 g/L(average 32 g/L), and organic removal efficiency showed 71~82%(average 76.3%).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.11
• /
• pp.1398-1406
• /
• 2004

The nonlinear signals from an impedance meter for the area average void fraction in two-phase flow have been analyzed to construct a phase space trajectory. The pseudo phase space was constructed with the time delay and proper dimensions. The time delay and the embedding dimension were chosen by the average mutual information and by the false nearest neighborhood, respectively. The attractor-density-map of projected states was used to produce the two dimensional probability distribution functions (2D-PDF). Since the developed 2D-PDF showed clear distinction of the flow patterns, the flow regime identification was made with three rules and with the 2D-PDF. Also, the transition criteria of Mishima-Ishii agree well with the present results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.3
• /
• pp.191-198
• /
• 1998

This paper presents a new current control method to reduce the torque ripple due to phase commutation, when the unipolar PWM method is applied for the phase current control of brushless DC motor. Phase commutation bring about an instantaneous change in the average voltage of conducting phase so that current undulates, and this undulating current generates torque ripple. In this paper, we analyze average voltage variations of conducting phase in commutation period with PWM pattern and design current controller to compensate average variations. In addition, we prove the validity of proposed method by experimental results.

• Korean Journal of Agricultural Science
• /
• v.45 no.4
• /
• pp.677-685
• /
• 2018

Weaning pigs often face post-weaning challenges such as diarrhea, low feed intake, and body weight (BW) loss which affects the health and economic value of weaning pigs. Interestingly, the use of yeast cultures (YCs) as feed supplements for pigs has increased markedly in recent years. This study evaluated the effects of yeast cultures (Saccharomyces cerevisiae) on the growth performance, fecal score, and nutrient digestibility of weaning pigs. A total of 50 crossed healthy weaning pigs [(Yorkshire ${\times}$ Landrace) ${\times}$ Duroc] with an average BW of $7.46{\pm}1.60kg$ (28 day of age) were used in a 6-week experiment. The experiment was divided into 3 phases (Phase 1, 1 - 2 weeks; Phase 2, 2 - 4 weeks; Phase 3, 4 - 6 weeks). Dietary treatments were as follows: 1) CON: basal diet and 2) CON + 0.50% YC. During phase 1, the average daily gain (ADG) and average daily feed intake (ADFI) were significantly increased (p < 0.05) in the weaning pigs fed YC supplementation diets compared with the weaning pigs fed the CON diet. During phase 3 as well as overall, the gain/feed ratio (G/F) was significantly increased (p < 0.05) in the YC supplementation group compared with the pigs fed the CON diet. In conclusion, the supplementation of YCs in the diet positively affected the growth performance of weaning pigs during the first two weeks after weaning.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.2
• /
• pp.49-63
• /
• 2003

For this study, four male university Taekwondo players were randomly chosen, between the weight categories of 60Kg and 80Kg. Their side kicks (yeop chagi), which are part of foot techniques, were kinematically analyzed in terms of the time, angle, and angular velocity factors involved with the kicks through the three-dimensional imaging. The results of the analysis are as fellows. 1. Time factor The first phase(preparation) was 0.48sec on average, accounting for 60% of the entire time spent; the second phase(the minimum angle of the knee joint) was 0.21sec on average, taking up 26% of the whole time spent; and the third phase(hitting) was 0.11sec on average, representing 14% of the entire time spent. 2. Angle factor In the first phase(preparation), rotating their bodies along the long axis, the players bended their hip and knee joints a lot, by moving fast in the vertical and horizontal directions, in the second phase(the minimum angle of the knee joint), the players continued to extend their bodies along the vertical axis, while pronating their lower legs and bending their hip and knee joints a lot to reduce the radius of gyration, and in the third phase(hitting), they extended their knee joints greatly so that the angle movements of their lower bodies shifted to circle movements. 3. Angular velocity factor In the first phase(preparation), the angular velocity of the hip and knee joints increased. while moving horizontally and rotating the body along the long axis; in the second phase(the minimum angle of the knee joint), the angular velocity increased by bending the hip and knee joints fast to reduce the rotation radios; and in the third phase(hitting), the angular velocity was found to have increased, by rotating the body along the long axis to increase the angular velocity and shifting the angular momentum of the pronated knee joint to the circular momentum.

• Korean Journal of Agricultural Science
• /
• v.50 no.3
• /
• pp.313-320
• /
• 2023

A total of 96 weanling pigs with an initial body weight of 5.96 ± 0.08 kg were randomly allocated to two dietary treatments and fed experimental weaning diets for 36 days in three phases; phase 1: day 1 to 7; phase 2: day 8 to 21, and phase 3: day 22 to 36. Treatments consisted of a basal diet (CON) containing 334.0 g/kg dried whey versus a lactic acid (LA) supplemented diet containing 313.6 g/kg dried whey with 10 g/kg LA during phase 1; a CON diet containing 200.0 g/kg dried whey versus an LA diet containing 186.0 g/kg dried whey with 7 g/kg LA during phase 2. During phase 3, both CON and LA groups were fed a diet without dried whey and LA. Pigs fed the LA diet had a higher average daily feed intake ADFI (p = 0.014) and reduced (p = 0.035) gain-feed ratio compared to pigs fed CON diet in phase 2. In phase 3, the average daily gain and feed intake were both increased (p = 0.026 and; p = 0.010, respectively) in the pigs previously fed the LA diet than those fed the CON diet. The apparent total tract digestibility of dry matter and, nitrogen, and the digestible energy were decreased (p < 0.05) in the LA diet group on day 7; however, increased (p < 0.05) digestibility of dry matter and nitrogen and digestible energy was observed at the end of phase 2 and 3. In conclusion, the inclusion of LA was inferred to have improved the average daily gain, feed intake, and nutrient digestibility during the late weanling period of pigs.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.1-14
• /
• 2003

This study was conducted to investigate the principles and motions for increasing the jumping height of Fosbury Flop. The subjects were three male jumpers who were former Korean national team players. Their jumping motions were analyzed using the DLT method of three-dimensional cinematography. The conclusions were as follows. 1. The horizontal velocity of approach run and decreasing of this velocity during the take off phase were increased as the jumping height was increased. Therefore, in order to increase the jumping height, the horizontal velocity of approachrun should be increased and decreased properly during the take-off phase. The average height of the analyzed Dials was 2.15m. The average horizontal velocity of approachrun was 7.49m/s and decreased to 4.16m/s at the instance of take-off. 2. The vertical velocity of the center of gravity was increased as the ascending height of the center of gravity during the take-off phase was increased. Therefore, the center of gravity at the instant of touch down should be lowered. This could be possible by increasing the length of the last stride and the backward lean angle of the body. The average length of the last stride was 111.1% of the standing height, the average height of the center of gravity was 46.6% of the standing height and the average backward lean angle of the body was 40.3 degrees.

• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.288-295
• /
• 2019

Rectifiers are widely used in industrial applications. Although detailed models of rectifiers are usually used to evaluate their performance, they are complex and time-consuming. Therefore, the Average Value Model (AVM) has been introduced to meet the demand for a simple and accurate model. This type of rectifier modeling can be used to simplify the simulations of large systems. The AVM of diode rectifiers has been an area of interest for many electrical engineers. However, healthy diode rectifiers are only considered for average value modeling. By contrast, faults occur frequently on diodes, which eventually cause the diodes to open-circuit. Therefore, it is essential to model bridge rectifiers under this faulty condition. Indeed, conventional AVMs are not appropriate or accurate for faulty rectifiers. In addition, they are significantly different in modeling. In this paper, a novel application of the parametric average value of a three-phase line-commutated rectifier is proposed in which one diode of the rectifier is considered open-circuited. In order to evaluate the proposed AVM, it is compared with experimental and simulation results for the application of a brushless synchronous generator field. The results clearly demonstrate the accuracy of the proposed model.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.1
• /
• pp.59-67
• /
• 2014

In 1995 Kimchi refrigerator was developed at first, and has used HFC-134a as refrigerant. Kimchi refrigerator has been made 1,044,694 on the basis of 2010, disposed about 160,000 per year. Although mobile air conditioning, commercial refrigerator, general refrigerator is regarded as a major source of HFC-134a, little information is available for its emission characteristics of HFC-134a. This paper addresses the fugitive emission factors of Kimchi refrigerator at use-phase and disposal-phase. The residual quantities of Korean-made fifty three waste Kimchi refrigerators were weighed using a commercial recover of refrigerants to determine the emission factors at the disposal-phase. On the other hand, the emission factors at use-phase were estimated from the residual quantities and operating times. The average residual rate of forty three scarp Kimchi refrigerators is determined to be $74.6{\pm}5.2%$. The emission factor at the use-phase is estimated to be $3.5{\pm}0.8%/yr$ as a result of using average age of 11.7 years and the average residual rate determined here. The emission factor at the disposal-phase is determined to be 31.3% after adopting 58% of the recycling rate of refrigerant reported by Recycling Center. We estimate 3.1 g/yr for the average emission quantity of HFC-134a per operating refrigerator, while 22.5 g for that per waste Kimchi refrigerator. Since the chemical compositions of refrigerant of waste Kimchi refrigerator were the same as those of new refrigerant, it is expected that the HFC-134a recovered from waste Kimchi refrigerator can be reused for refrigerant.