• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.124-125
• /
• 2000

Since Nye and Berry$^{(1)}$ showed that in free space the electromagnetic field could contain stable, propagating phase singularities termed "dislocations", optical dislocations have been extensively investigated in nonlinear optics and laser physics. As the wave propagates, the lines of constant phase surrounding a dislocation trace out a spiral in space or in time. So these phase singularities are now usually referred to as optical vortices. Baranova and her co-workers$^{(2)}$ have shown that in fully developed speckle patterns, there is, one optical vortex accompanying each speckle spot on average. Among these vortices there are networks in phasemap because only one phase is to be assigned in one point except optical dislocations having zero amplitude. Freund et al.$^{(3)}$ have been studied optical dislocation networks and simulations are compared with experimental results. (omitted)

• Journal of the Optical Society of Korea
• /
• v.3 no.1
• /
• pp.1-9
• /
• 1999

We have studied the sensitivity of four different phase shift measurement schemes with a Mach-Zehnder interferometer. The input light is considered to be in a coherent state and the detectors are assumed to be ideal with the quantum efficiency of unity. It is shown by direct calculation of the operators corresponding to the measurement schemes that the uncertainty of the phase-shift measurement is limited to the classical one $\frac{1}{\sqrt{m}}$(m is the average number of the photons in the input state) regardless of the phase-shift measurement schemes.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.528-537
• /
• 1989

The objective of this paper is to investigate effects of the specific heat and the diameter of suspending particles on the heat transfer coefficient of two phase turbulent flow with suspension of solid particles in a circular tube with constant heat flux. Heat transfer coefficients of two phase turbulent flow in pipe with suspension of graphite powder were measured with variations of particle sizes and solid-gas loading ratio. Measured data were compared with predictions by numerical analysis in which the turbulece models are closed on the first order level. Results show that heat transfer coefficient increases with increasing the solid-gas loading ratio and the specific heat of suspending material, however, it decreases as the average diameter of particles decreases below $24{\mu}m$.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.464-467
• /
• 1996

The microstructural evolution during mechanical alloying of Nb and Sn powders, of average composition Nb3Sn, has been investigated by X-ray diffraction(XRD) and scanning electron microscopy(SEM). Observations by SEM showed a progressive change of milling time. From the XRD studies, the structural development with milling time depends on the ball size for a given powder/ball ratio. Using a larger ball of 9.5mm diameter, the elemental powders initially alloy mechanically to form an A15 structure phase, and then amorphised with continued milling. However, in case of milling with a smaller ball of 3.968mm diameter, an amorphous phase is first formed. These results can be understood by considering the dependence of the milling energy on the ball size. The homogeneous stoichiometric $Nb_3Sn$ phase could be easily obtained by heat treatment of a supersaturated solid solution produced by MA. Heat treatment of an amorphous phase formed by MA resulted in the mixture of the $Nb_3Sn$ and $Nb_6Sn_5$ phases.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.37-39
• /
• 1998

The hybrid step motor has found applications in a wide range of mechanical systems as a low cost, open-loop positioning device. The step motor provides good stiffness at rest against disturbing load influences, a combination of moderate speed fine resolution, high reliability and simplicity. In recent years, considerable competition has arisen over the technological issue of wheather the device should be applied as a 2-Phase or 5-Phase machine. In this paper, to compare two systems, we have atempted to derive the mathematical. model, and analysed operating detent torque with this model. The analysis shows that a fundamental component of the permeance distribution produces the average torque and that harmonic components produce the ripple torque.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.67.1-67.1
• /
• 2020

Adaptive Optics (AO) is the technology for ground-based telescopes to overcome the interference caused by atmospheric turbulence. We are developing an AO system for the 1-m telescope at Seoul National University Observatory (SNUO). The seeing size of the SNUO is 2 arcseconds on average, and 0.85 arcseconds at best condition. Our system is based on MEMS deformable mirror and Shack-Hartmann wavefront sensor. We developed the wavefront sensor using a cheap CMOS camera, and measured phase disturbance at SNUO. To verify the performance of the AO system, we designed an artificial phase disturber that produces similar scale phase error, measured at SNUO. We carried out laboratory tests in which the AO system measures and corrects the wavefront using the phase disturber and an F/6 light source, the same as that of SNUO telescope. The control system was developed in C++. The system performs closed-loop PI correction up to 100 Hz at a consumer-grade PC.

• ETRI Journal
• /
• v.29 no.3
• /
• pp.402-404
• /
• 2007

One of the major disadvantages of the orthogonal frequency division multiplexing system is high peak-to-average power ratio (PAPR). Selected mapping (SLM) is an efficient distortionless PAPR reduction scheme which selects the minimum PAPR sequence from a group of independent phase rotated sequences. However, the SLM requires explicit side information and a large number of IFFT operations. In this letter we investigate a novel PAPR reduction method based on the radial basis function network and SLM.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.63-66
• /
• 1998

MC-CDMA(Multi-Carrier Code Division Multiple Access) 시스템에서 전송 신호의 피크 전력 대 평균 전력(Peak-to-Average Power: PAP)율을 낮추는 방안을 제시한다. 확산 코드에 의해 결정된 각 부 캐리어의 위상 오프셋은 전송 신호의 복소 포락선 형성에 영향을 주게 되어 전송 신호의 PAP 율을 결정하게 된다. 따라서 각 부 캐리어의 위상 오프셋을 적절히 조정함으로써 PAP율을 낮출수 있다. 본 논문에서는 PAP 율을 감소시키는 부 캐리어 위상 오프셋 코드의 한 예를 제시하며, 모의 실험을 통하여 전송신호의 크기 분포 특성과 PAP 율의 감소를 확인한다.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.3
• /
• pp.487-493
• /
• 2013

This experiment was conducted to investigate the possibility that milking speed traits can be improved by estimating their genetic parameters and to provide basic information when the goals for dairy cattle improvement are established. The amount of milk within the first three minutes (3MG) was 8.97 Kg and 57% of total milk was produced within 3 minutes, but it was lower than that of the recommended level (70%). The highest milk flow (HMF) and average milk flow (DMHG) in the main milking phase were 3.66kg/min and 2.43kg/min, respectively, which were lower than those of the recommended levels (4.0 5.0kg/min and 3.0 4.0kg/min), suggesting slower milking speed of domestic dairy cattle compared to that of foreign dairy cattle. The heritability estimates on the highest milk flow (HMF), maximum milk flow (HMG) in one minute and average milk flow (DMHG) in the main milking phase were 0.35, 0.31 and 0.29, respectively, which are suitable for the improvement of traits with medium heritability. The genetic correlation between total milk yields (MGG) and average milk flow (DMHG) in the main milking phase was 0.591, while the genetic correlations among milking speed traits including the highest milk flow (HMF), maximum milk flow (HMG) in one minute and average milk flow (DMHG) in the main milking phase were in the range of 0.889 0.997.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.1
• /
• pp.21-28
• /
• 2009

DFT-spread OFDM(Discrete Fourier Transform-Spread Orthogonal Frequency Division Multiplexing) is very effective for solving the PAPR(Peak-to-Average Power Ratio) problem. Therefore, the SC-FDMA(Single Carrier-Frequency Division Multiple Access) which is basically same to the DFT spread OFDM was adopted as the uplink standard of the 3GPP LTE ($3^{rd}$ Generation Partnership Project Long Term Evolution). Unlike the ordinary OFDM system, the SC-FDMA using DFT spreading method is vulnerable to the ICI(Inter-Carrier Interference) problem caused by the phase noise and IQ(In-phase/Quadrature) imbalance and effected FDE(Frequency Domain Equalizer). In this paper, the ICI effects from the phase noise and IQ imbalance which can be problems in uplink transmission are analyzed according the back-off level of HPA. Next, we propose the equalizer algorithm to remove the ICI effects. This proposed equalizer based on the FDE can be considered as up-graded and improved version of PNS(Phase Noise Suppression) algorithm. This proposed equalizer effectively compensates the ICI resulting from the phase noise and IQ imbalance. Finally, through the computer simulation, it can be shown that about SNR=14 dB is required for the $BER=10^{-4}$ after ICI compensation when the back-off is 4.5 dB, $\varepsilon=0.005$, $\phi=5^{\circ}$, and $pn=0.06\;rad^2$.