• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.308-315
• /
• 2001

In this paper, a new power amplifier is proposed for reduction of amplified RX band noise signals as well as intermodulation distortion signals using feedforward technique. This power amplifier is implemented for IMT-2000 basestation TX frequency band. Both TX band intermodulation distortion signals and RX band noise signals are reduced by controlling variable attenuator, phase shifter and error amplifier. The proposed power amplifier, which contains two loops-intermodulation distortion signals cancellation loop and RX band noise signals cancellation loop, can provide duplexer with low TX path insertion loss for various wireless communication systems due to choice of loose RX attenuation characteristic. The principle of the proposed amplifier is described graphically based on the conceptual schematic diagram. A two-tone test for power amplifier is done at 2.14GHz with frequency spacing of 5MHz, and RX band rejection test is done over RX full band of 60MHz with 1.95GHz center frequency. Experimental results represent that the cancellation performance of intermodulation distortion signals and RX band noise signals are more than 3 1dB and 21dB, respectively.

• Journal of the Korean Society for information Management
• /
• v.23 no.1 s.59
• /
• pp.243-259
• /
• 2006

This paper examines the values of various library functions according to users' points of view. To execute this study, the several 'circumstance', related variables and 'condition' variables that lead to factors or functions of academic libraries were measured. Analysis was carried out in three stages. In the first, factor analysis was used on the three multi variable dimensions to ensure that the groups of variables loaded significantly and uniquely on the respective dimensions. The second phase of analysis involved the use of binary logistic regression analysis to complete research models. In the third phase, t-test was used to identify significant differences in the independent variables for additional explanation of the models. Books, competition & effectiveness and fee verses free (fee-free hereafter) are the three main factors that distinguish not only the purpose of using an academic library but also the degree of influence on knowledge, information and library facilities for the users. In addition, the fee-free factor related to digital library facilities was also uncovered.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.5
• /
• pp.462-473
• /
• 1999

This paper addresses the current measurement issue of all digital field oriented control of ac motors. The p paper focuses on the effect of low-pass filter and also on the sampling of the fundamental component of the m motor current. The low-pass filter, which suppresses the switching noise of the motor current, introduces v variable phase delay according to the current ripple frequency. It is shown that the current sampling error c consists of the fundamental component and high frL'quency ripple components. In this paper, the dependency of t this current sampling e$\pi$or on the reference voltage vector is investigated analytically and a sampling technique i is proposed to minimize the error. The work is based on the three phase symmetry pulse width modulation l inverter driving an induction machine. With this technique, the bandwidth of current regulator can be extended t to the limit given by the switching frequency of the inverter and more precise torque regulation is possible.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.6
• /
• pp.65-72
• /
• 2001

This paper deals with a novel full digital control of the single-phase PWM(Pulse Width Modulation) inviter for UPS(Uninterruptible Power Supp1y). The voltage and current of output filter capacitor as a state variable are the feedback control input. In the proposed scheme a double deadbeat control consisting of minor current control loop and major voltage control loop have been developed In addition, a second order deadbeat currents control which should be exactly equal to its reference in two sampling time without error and overshoot is proposed to remove the influence of the calculation time delay. The load current prediction is achieved to compensate the load disturbance. The simulation and experimental result shows that the proposed system offers an output voltage with THD(Total Harmonic Distortion) less than 5% at a full nonlinear load.

• The korean journal of orthodontics
• /
• v.47 no.5
• /
• pp.298-305
• /
• 2017

Objective: This paper describes changes in the characteristics of patients seeking orthodontic treatment over the past decade and the treatment they received, to identify any seasonal variations or trends. Methods: This single-center retrospective cohort study included all patients who presented to Seoul National University Dental Hospital for orthodontic diagnosis and treatment between January 1, 2005 and December 31, 2015. The study analyzed a set of heterogeneous variables grouped into the following categories: demographic (age, gender, and address), clinical (Angle Classification, anomaly, mode of orthodontic treatment, removable appliances for Phase 1 treatment, fixed appliances for Phase 2 treatment, orthognathic surgery, extraction, mini-plate, mini-implant, and patient transfer) and time-related variables (date of first visit and orthodontic treatment time). Time series analysis was applied to each variable. Results: The sample included 14,510 patients with a median age of 19.5 years. The number of patients and their ages demonstrated a clear seasonal variation, which peaked in the summer and winter. Increasing trends were observed for the proportion of male patients, use of non-extraction treatment modality, use of ceramic brackets, patients from provinces outside the Seoul region at large, patients transferred from private practitioners, and patients who underwent orthognathic surgery performed by university surgeons. Decreasing trends included the use of metal brackets and orthodontic treatment time. Conclusions: Time series analysis revealed a seasonal variation in some characteristics, and several variables showed changing trends over the past decade.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.80-80
• /
• 2013

대규모 광도곡선 자료에서 다양한 주기변광성들의 정확한 주기를 효율적으로 검출하는 실험을 시도하였다. 실험을 위해 OGLE-III 맥동 변광성(RR Lyrae, Delta Scuti, Cepheid) 목록 중, I 필터로 관측된 총 31,324개의 광도 곡선을 사용하였다. 이 실험에 사용한 주기분석 알고리즘 MS_Period(Multi-Step period searching method)는 주기를 놓치지 않기 위해 두 가지 다른 방법(Multi Polynomial function, Phase Dispersion)으로 후보 주기를 구하고 정밀주기를 도출하기 위해 후보 주기 주변부를 Spline fitting을 통해 재탐색하는 방법이다. 기존의 MS_Period 방식은 주기 탐색 간격(dP/P)이 일정하였으나, 우리는 탐색 주기 구간을 나누고 짧은 주기에서는 작은 간격으로, 긴 주기에서는 보다 넓은 간격으로 주기를 탐색하는 과정을 추가하였다. 그 결과 98% 이상의 별에서 OGLE-III와 거의 일치하는 주기를 얻었으며, 긴 주기에서의 불필요한 정밀 탐색을 회피함으로써 분석시간도 단축되었다. 주기 결정이 어려운 경우들은 주로 1) periodogram에서 실제 주기가 아닌 1일 근처에서 noise보다 큰 peak가 보이는 경우, 2) 하나의 별에 대해 여러 주기가 비슷한 Phase diagram을 보이고, periodogram에서도 비슷한 peak를 갖는 경우, 3) OGLE-III의 주기와 전혀 다른 주기만 찾은 경우, 4) OGLE-III에서 제시하지 않은 혼합된 주기의 존재가 의심되는 경우인 것을 확인하였고, 각 사례들의 특징을 살펴보았다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.2
• /
• pp.161-166
• /
• 2014

This Electromagnetic metal piece detection sensor, having high sensitivity even under high humidity and dust density, using LVDT was investigated. Metal detection characteristics using phase detection method, for 3 frequencies covering ELF and LF band, were experimentally measured. It was found that the sensitivity for metal and animal food, in which metal piece was included, was exponentially increased as frequency increased. Reducing cutoff frequency of LPF after PD was found to be effective to proportionally increase sensitivity. Also the sensitivity of metal piece detection was enhanced by optimizing BPF bandwidth and SNR. Metal piece detection limit using available ferrous test samples was found to be 0.7mm diameter from the experiment using 50kHz, in ELF band, which was known to have better selectivity to animal food. is an example of ABSTRACT format.

• Journal of Power Electronics
• /
• v.10 no.5
• /
• pp.548-554
• /
• 2010

In this paper, a 1.5 kW Interior Permanent Magnet Synchronous Generator (IPMSG) with a power conditioner for the grid integration of a variable-speed wind turbine is developed. The power-conditioning system consists of a series-type 12-pulse diode rectifier powered by a phase shifting transformer and then cascaded to a PWM voltage source inverter. The PWM inverter is utilized to supply sinusoidal currents to the utility line by controlling the active and reactive current components in the q-d rotating reference frame. While the q-axis active current of the PWM inverter is regulated to follow an optimized active current reference so as to track the maximum power of the wind turbine. The d-axis reactive current can be adjusted to control the reactive power and voltage. In order to track the maximum power of the wind turbine, the optimal active current reference is determined by using a simple MPPT algorithm which requires only three sensors. Moreover, the phase angle of the utility voltage is detected using a simple electronic circuit consisting of both a zero-crossing voltage detecting circuit and a counter circuit employed with a crystal oscillator. At the generator terminals, a passive filter is designed not only to decrease the harmonic voltages and currents observed at the terminals of the IPMSG but also to improve the generator efficiency. The laboratory results indicate that the losses in the IPMSG can be effectively reduced by setting a passive filter at the generator terminals.

• Journal of Preventive Medicine and Public Health
• /
• v.43 no.6
• /
• pp.513-522
• /
• 2010

Objectives: The purpose of this study was to define the association between the medical utilization of osteoarthritis patient and its related factors. Methods: We used the 2005 Korean National Health and Nutrition Survey data and we enrolled 2833 participants who were forty or older and who were diagnosed as having osteoarthritis by a doctor within 1 year and who had suffered from osteoarthritis for more than 3 months. The Andersen behavioral model was used as the analytic framework, and the variables were categorized into predisposing, enabling, and need factors. To determine the influence of each variable on the medical utilization of osteoarthritis patient, we applied hierarchical logistic regression analysis with two stages: the first stage included the predisposing and enabling factors and the second stage included the need factors. Results: On the hierarchical logistic analysis, the variables of personal income, the type of medical security, the duration of arthritis related symptoms within 1 month, the subjective health status and the duration of osteoarthritis showed a statistically significant association with medical utilization in men. And the variables of age, limitation activity due to osteoarthritis, arthritis related symptoms within 1 month, and the subjective health status had a statistically significant association with medical utilization in women. Conclusions: The patients who tend to receive less care are those who suffer less from symptoms of osteoarthritis, those who are within the initial phase, or those with a low-level severity of osteoarthritis. It is necessary to encourage patients to receive the treatment in the initial phase.

• Journal of Welding and Joining
• /
• v.11 no.2
• /
• pp.27-41
• /
• 1993

The estimation of nugget sizes was attempted by utilizing the artificial neural networks method. Artificial neural networks is a highly simplified model of the biological nervous system. Artificial neural networks is composed of a large number of elemental processors connected like biological neurons. Although the elemental processors have only simple computation functions, because they are connected massively, they can describe any complex functional relationship between an input-output pair in an autonomous manner. The electrode head movement signal, which is a good indicator of corresponding nugget size was determined by measuring the each test specimen. The sampled electrode movement data and the corresponding nugget sizes were fed into the artificial neural networks as input-output pairs to train the networks. In the training phase for the networks, the artificial neural networks constructs a fuctional relationship between the input-output pairs autonomusly by adjusting the set of weights. In the production(estimation) phase when new inputs are sampled and presented, the artificial neural networks produces appropriate outputs(the estimates of the nugget size) based upon the transfer characteristics learned during the training mode. Experimental verification of the proposed estimation method using artificial neural networks was done by actual destructive testing of welds. The predicted result by the artifficial neural networks were found to be in a good agreement with the actual nugget size. The results are quite promising in that the real-time estimation of the invisible nugget size can be achieved by analyzing the process variable without any conventional destructive testing of welds.