• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.163-165
• /
• 1993

This study describes the influence of the mutual inductance between the adjacent phase windings of variable reluctance motor[VRM] and presents a new type of inverter for reduction of such influence. In this inverter topology, though an additional power switch is used as compared with the conventional C-dump inverter circuit, unwanted negative torque produced by the mutual inductance is remarkably reduced. Hence, the circuits results in increase of the average torque and contributes to the improvement of overall drive efficiency. Theoretical prediction is verified by experimental results obtained with the integration of presented inverter and prototype 6/4 VRM.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.167.2-167
• /
• 2001

This paper presents guidance and control laws which guarantee a minimum fuel consumption and have obustness against various disturbances during a terminal-landing phase on the lunar surface. The nonlinear robust tracking control system is designed to track the reference profiles, which are expressed by exponential functions. An adjustment law in the tracking controller is given in the form of the differential equations with respect to the controller´s variable gains. Computer simulations are performed to examine the tracking accuracy, the robustness in a thrust failure mode, and the vertical soft landing at a pre-assigned point on the lunar surface. The results of numerical simulation show the effectiveness of the present control law.

• Transactions on Control, Automation and Systems Engineering
• /
• 제1권1호
• /
• pp.22-31
• /
• 1999

In this paper, a robust observer design method for nonlinear multi input multi-output(MINO) plants is presented. This method enables the extension of the time delay observer (TDO) for nonlinear SISO plants in the phase variable form to MIMO plants. The designed TDO reconstructs the states of the plant expressed in the generalized observability canonical form (GOBCF), yet requiring neither the transformation of a plant, nor the real time computation coordinates, the observer turned out to be computationally efficient and easy to design for nonlinear MIMO plants. In a simulation of a two-link manipulator with flexible joints, the control performances using TDO appeared to be similar to those using actual states and superior to those using numerical differentiation. Finally, in an experiment with a robot, it was confirmed that the TDO reconstructs the states reliability and TDO can be effectively used in a real closed-loop system.

• 제어로봇시스템학회논문지
• /
• 제16권4호
• /
• pp.396-402
• /
• 2010

In this paper the principles and structure of a WTS (Wind Turbine Simulator) are described. The proposed WTS is a versatile system specially designed for the purpose of developing and testing new control strategies for wind energy conversion systems. The simulator includes two sub-systems; a torque controller which controls a 3-phase induction motor in order to simulate the wind turbine and wind speed generator which can simulate an actual wind speed. In order to make the proposed system working in real-time, two sub-systems are incorporated into one simulink block by using Real-time workshop. The performance of the proposed system is verified by considering various wind speeds.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.223-228
• /
• 2003

In end milling processes, characterized by use of rotating tools, the underformed chip thickness varies periodically with the phase change of tool. In current study, as a new approach to analyse shear behaviors In the shear plane and chip-tool friction behavior chip-tool contact region during an end milling process. In this approach, an up-end milling process is transformed into an equivalent oblique cutting process. Experimental investigations for two sets of cutting tests i.e.. up-end milling and the equivalent oblique cutting test were performed to verify the presented model.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.601-606
• /
• 1992

In this paper, we consider an optimal guidance problem with both the terminal impact angle and control constraints in addition to the usual zero miss distance constraint. We first present the optimal solution of the problem for the missile of an arbitrary order, and show that it is a linear combination of a step response and a ramp response of the missile. Therefore the usual practice of using the control obtained by saturating the optimal solution for the case of unlimited control may result in a large terminal miss. A method called the initial command saturation is suggested to reduce this terminal miss, where the control in the initial phase of guidance is forced to be saturated until a certain condition for a guidance variable is met.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1371-1376
• /
• 1990

The paper presents a method of constructing simple fuzzy control rules for the determination of stabilizing signals of automatic voltage regulator and governor, which are controllers of electric power systems. Fuzzy control rules are simplified by considering a coordinate transformation with the rotation angle .theta. on the phase plane, and by expanding the range of membership functions. Also, two rotation angles .theta. $_{1}$ and .theta. $_{2}$ are selected for the linearizable region and the nonlinear one of the system, respectively. Here, .theta. $_{1}$ is chosen by the pole assignment method, and .theta. $_{2}$ by a performance index. Fuzzy inference is applied to the connection of two rotation angles .theta. $_{1}$ and .theta. $_{1}$ by regarding the distance from the desired equilibrium point as a variable of condition parts. The control effect is demonstrated by an application of the proposed method to one-machine infinite-bus power system.

• 한국태양에너지학회 논문집
• /
• 제24권4호
• /
• pp.55-63
• /
• 2004

The purpose of this study is to development of life cycle cost analysis methodology of HVAC system for decision maker. The results of this study are as follows; maintenance/management, equipment construction, planning/design, and demolition/sell phases (1) To develop the cost breakdown structure for LCC in HVAC system, this study apply the method of additional pertinent level, title, CBS number, block number and variable index. (2) LCC analysis order of HVAC system compose four phase. (3) Life cycle costing influence diagram can bring us to make the most efficient decision through a visual graphical diagram that is shown relationship among variables and that decision maker traces easily from life cycle cost analysis situation.

• 제어로봇시스템학회논문지
• /
• 제9권3호
• /
• pp.186-195
• /
• 2003

This paper deals with eigenvalue assignment techniques for linear time-varying systems as a way of achieving feedback stabilization. For this, the novel eigenvalue concepts, which are the time-varying counterparts of the conventional (time-invariant) eigenvalue notions, are introduced. Then, the Ackermann-like formulae for SISO/MIMO linear time-varying systems are proposed. It is believed that these techniques are the generalized versions of the Ackermann formulae for linear time-invariant systems. The advantages of the proposed Ackermann-like formulae are that they neither require the transformation of the original system into the phase-variable form nor compute the eigenvalues of the original system. Two examples are given to demonstrate the capabilities of the proposed techniques.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.550-552
• /
• 1997

This paper describes a detailed performance analysis of TCSC using experiment with a scaled model. A 3-phase scaled model of TCSC was built with rating of 2kVA to verify the operation. The variable reactance of TCSC with respect to the firing angle of thyristor switch analyzed theoretically and experimentally. And the limit of TCSC operation was investigated in whole range of the thyristor firing-angle. The experimental results with scaled model were compared with the simulation results for a periodic state space model using MATLAB.