• 암석학회지
• /
• 제15권4호
• /
• pp.180-193
• /
• 2006

경상분지 의성지괴의 중앙 북부에 위치하는 안동시 길안면 지역은 선캠브리아기 변성암류, 트라이아스기 청송화강암, 백악기 초 하양층군, 백악기 말-고제3기 화성암류 등으로 구성되어 있다. 이 지역에는 다양한 방향의 단층(남북 내지 북북서 방향의 옥산단층, 북서 방향의 길안단층, 서북서 방향의 황학산단층, 그리고 동서 방향의 임봉산단층)들이 발달하고, 경상분지의 기반암류에 해당하는 청송화강암내에는 다수 단열조의 상대적 시간관계(선후관계 및 공존관계)와 전단단열의 운동감각을 결정하는데 이용되는 기하학적 지시자가 잘 관찰된다. 본 논문은 이들 단열조의 기하학적 특성(연결, 종료, 교차형상 및 절단관계)에 대한 정밀한 분석을 통하여 경상분지 의성지괴 길안면 지역에 발달하는 인장단열의 발달사와 전단단열의 운동성을 연구하였다. 그 결과, 길안면 지역에 발달하는 단열계는 적어도 7회의 변형단계(Dn 이전 단계에서 Dn+5 단계로 명기)를 걸쳐 형성되었고, 단열조의 우세 방향성은 길안면 주변지역에 발달하는 지질도 규모의 단층 우세 방향성과 거의 일치하는 (서)북서, 북북서, 북북동, 동서, 북동 순서로 나타난다. 단열조의 발달사와 운동성를 요약하면 다음과 같다. (1) Dn이전 단계: 남북 내지 북북서 또는 서북서 내지 동북동 방향의 인장단열 형성기. 이후 응력장 변화와 함께 남북 내지 북북서 방향의 절리조는 좌수향 ${\rightarrow}$우수향${\rightarrow}$좌수향 전단단열운동으로 그리고 서북서 내지 동북동 방향의 절리조는 (우수향${\rightarrow}$)좌수향 전단단열운동으로 각각 재활동하였다. (2) Dn 단계: 북서 방향의 인장단열 형성기. 이 단계의 절리조는 이후 좌수향${\rightarrow}$우수향 순서의 전단단열운동을 경험한다. (3) Dn+l 단계:북북동 내지 북동 방향의 인장단열 형성기. 이후, 좌수향 전단단열운동으로 활동하게 된다. (4) Dn+2 단계: 동북동 내지 동서 방향의 인장단열 형성기. (5) Dn+3 단계: 서북서 내지 북서 방향의 인장단열 형성기. (6) Dn+4 단계: 북북서 방향의 인장단열 형성기. 이후, 우수향 전단단열운동으로 활동하였다. (7) Dn+5 단계: 북북동 방향의 인장단열 형성기.

• 암석학회지
• /
• 제25권4호
• /
• pp.389-400
• /
• 2016

영남육괴 지리산지구의 남동부에 위치하는 산청지역은 주로 선캄브리아시대 지리산 변성암복합체, 산청 회장암복합체, 중생대 화성암류 등으로 구성되어 있다. 산청 회장암복합체 내에는 다수의 단열조의 상대적인 시간관계(선후관계 및 공존관계)와 전단단열의 발달순서 및 운동감각을 결정하는데 이용되는 기하학적 지시자가 잘 관찰된다. 본 논문은 이들 다수의 단열조에 대한 방향성과 운동학적 기하학적 특성을 정밀하게 분석하여 산청 회장암복합체에 발달하는 인장단열의 발달순서와 전단단열의 발달순서 및 운동성을 고찰하였다. 그 결과 산청 회장암복합체에 발달하는 단열계는 적어도 5회의 변형단계(Dn 단계에서 Dn+3 이후단계로 명기)를 걸쳐 형성되었음이 인지된다. (1) Dn 단계: 북북서-남남동 방향의 인장단열 형성기. 이후 응력장 변화로 인해 우수향 ${\rightarrow}$ 좌수향 전단단열운동을 활동하였다. (2) Dn+1 단계: (북)북동-(남)남서 방향의 인장단열 형성기. 이 단계의 단열조는 이후 좌수향 ${\rightarrow}$ 좌수향 ${\rightarrow}$ 우수향 전단단열운동으로 재활동하였다. (3) Dn+2 단계: 북서-남동 방향의 인장단열 형성기. 이후, 우수향 전단단열운동을 겪었다. (4) Dn+3 단계: 남-북 방향의 인장단열 형성기. (5) Dn+3 이후단계: (동)북동-(서)남서 방향의 인장단열 형성기. Dn 단계는 송림조산운동 전기, Dn+1 단계는 송림조산운동 후기, Dn+2 단계는 대보조산운동 시기, Dn+3 단계는 불국사 조산운동 시기 그리고 Dn+3 이후단계는 불국사 조산운동 시기 이후에 형성되었다.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.1088-1096
• /
• 2017

Load variations on a distribution line result in voltage fluctuations at the point of common coupling (PCC). In order to keep the magnitude of the PCC voltage constant at its rated value and obtain zero voltage regulation (ZVR), a D-STATCOM is installed for voltage correction. Moreover, the ZVR mode of a D-STATCOM can also be used to balance the source current during unbalanced loading. For medium voltage and high power applications, a D-STATCOM is realized by the cascaded H-bridge topology. In the ZVR mode, the D-STATCOM may draw unbalanced current and in this process is required to handle different phase powers leading to deviations in the cluster voltages. Zero sequence voltage needs to be injected for ZVR mode, which creates circulating power among the phases of the D-STATCOM. The computed zero sequence voltage and the individual DC capacitor balancing controller help the DC cluster voltage follow the reference voltage. The effectiveness of the control scheme is verified by modeling the system in MATLAB/SIMULINK. The obtained simulations are further validated by the experimental results using a dSPACE DS1106 and five-level D-STATCOM experimental set up.

• 대한전자공학회논문지TC
• /
• 제44권2호
• /
• pp.22-28
• /
• 2007

높은 PAPR (peak-to-average power ratio)은 OFDM (orthogonal frequency division multiplexing) 신호의 주된 문제점이다. 본 논문에서는 RS (Reed-Solomon) 부호의 소실 복호 기능을 이용한 수정된 SLM (selective mapping) 기법을 제안한다. 송신기에서 RS 부호화된 OFDM 데이터 블록에 일련의 위상 시퀀스를 곱하여 일부의 체크 심볼의 위상을 천이시킨다. 수신기에서 위상 천이된 체크 심볼들을 소실로 간주하여 RS 복호를 수행한다. 그러므로 가장 낮은 PAPR을 갖도록 선택된 위상 시퀀스에 대한 부가 정보를 전송할 필요가 없다. 또한 선택된 위상 시퀀스에 대한 추정 과정이 더 이상 수신기에 필요하지 않게 되어 복잡도와 성능이 향상된다. 제안한 수정된 SLM 기법의 성능을 평가하기 위해 PAPR의 CCDF(complementary cumulative distribution function), BER(bit error rate) 그리고 복호 실패 확률을 기존의 SLM 기법과 비교한다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.574-578
• /
• 2003

There are so many methods to estimate the groundwater recharge. These methods can be categorized into four groups. First groupis related to the water balance analysis, second group is concerned with baseflow/springflow recession, and third group is interested in some types of tracers; environmental tracers and/or temperature profile. The limitation of these types of methods is that the estimated results of recharge are presented in the form of an average over some time period. Forth group has a little different approach. They use the time series data of hydraulic head and specific yield evaluated from field test, and the results of estimation are described in the sequential form. But their approach has a serious problem. The estimated results in forth typeof methods are generally underestimated because they cannot consider the discharge phase of water table fluctuation coupled with the recharge phase. Ketchum el. at. (2000) proposed calibrated method, considering recharge- and discharge-coupled water table fluctuation. But the dischargeis considered just as the areal average with discharge rate. On the other hand, there are many methods to estimate the source wavelet with observed data set in geophysics/signal processing and geophysical methods are rarely applied to the estimation of groundwater recharge. The purpose this study is the evaluation of the applicability of one of the geophysical method in the estimation of sequential recharge rate. The applied geophysical method is called minimum entropy deconvolution (MED). For this purpose, numerical modeling with linearized Boussinesq equation was applied. Using the synthesized hydraulic head through the numerical modeling, the relative sequenceof recharge is calculated inversely. Estimated results are very concordant with the applied recharge sequence. Cross-correlations between applied recharge sequence and the estimated results are above 0.985 in all study cases. Through the numerical test, the availability of MED in the estimation of the recharge sequence to groundwater was investigated

• Journal of Microbiology
• /
• 제45권6호
• /
• pp.558-565
• /
• 2007

Using microarray analysis, we determined those Salmonella genes induced at the entry of stationary phase, and subsequently discovered that uncharacterized yliH was induced most dramatically. We set out to establish the molecular mechanism underlying the stationary phase induction of yliH under the standard culture condition, LB with vigorous aeration, by analyzing its promoter activity in various mutant backgrounds, lacking stationary phase ${\sigma}$, $RpoS^-$, or stringent signal molecules ppGpp, ${\Delta}relA$ ${\Delta}spoT$. It was found that the stationary phase induction of yliHp was partially dependent on rpoS but entirely dependent on ppGpp. DNA sequence analysis revealed that the Salmonella yliH gene is composed of 381 base-pair nucleotides, with overall amino acid sequence revealing 76.38% amino acid identity and 88.98% similarity with Escherichia coli yliH, although no motif from data base was noted for its possible role. Recently however, it has been reported that yliH in E. coli was implicated in biofilm formation and motility by repressing these activities (Domka et al., 2006). We have constructed a mutant Salmonella deleting yliH gene by allele replacement and examined its phenotype, and found that the yliH in Salmonella more or less affects motility and adherence by enhancing these activities. The effect on biofilm formation in Salmonella was uncertain. Moreover, addition of cloned yliH of E. coli into Salmonella did not reduce motility or adherence. Taken together, it appears that the pathways implicating yliH for biofilm formation and motility in E. coli and in Salmonella are somewhat different.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권5호
• /
• pp.249-257
• /
• 2002

In this paper, a novel control scheme compensating source voltage unbalance and harmonic currents for the combined system of series active and shunt passive power filter is proposed, where no low/high-pass filters are used in deriving the reference voltage for compensation. The phase angle and the reference voltages compensating for harmonic current and unbalanced voltage are derived from the positive sequence component of the unbalanced voltage set, which is simply obtained by using digital all-pass filters. In order to remove the phase delay in generating the reference voltage for compensation, the reference of 5th and 7th harmonic components is predicted one-sampling ahead. The validity of the proposed scheme has been verified for 3[kVA] proto-type active power filter system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.33-37
• /
• 2004

Slotless Permanent magnet Brushless DC Motor(PM BLDC) with the characteristics of high speed and high power density has been more widely used in industrial and automatic machine. Generally, PM BLDC meter is necessary that the three Hall-ICs evenly be distributed around the stator circumference in case of the 3 phase motor. The Hall-ICs are set up in this motor to detect the main flux from the rotor. therefore the output signal from Hall-ICs is used to drive a power transistor to control the stator winding current. However, instead of using three Hall-ICs, if only we used one Hall-IC, we estimate information of the others phase in sequence through a revolving rotor. This paper identified the characteristics and performance by using one Hall-IC for the 3 phase PM BLDC whose six stator and two rotor designed.

• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.576-582
• /
• 2011

This paper presents a novel control strategy for selective compensation of power quality (PQ) problems, depending upon the limited rating of voltage source inverters (VSIs), through a unified power quality conditioner (UPQC) in a three-phase four-wire distribution system. The UPQC is realized by the integration of series and shunt active power filters (APFs) sharing a common dc bus capacitor. The shunt APF is realized using a three-phase, four-leg voltage source inverter (VSI), while a three-leg VSI is employed for the series APF of the three-phase four-wire UPQC. The proposed control scheme for the shunt APF, decomposes the load current into harmonic components generated by consumer and distorted utility. In addition to this, the positive and negative sequence fundamental frequency active components, the reactive components and harmonic components of load currents are decomposed in synchronous reference frame (SRF). The control scheme of the shunt APF performs with priority based schemes, which respects the limited rating of the VSI. For voltage harmonic mitigation, a control scheme based on SRF theory is employed for the series APF of the UPQC. The performance of the proposed control scheme of the UPQC is validated through simulations using MATLAB software with its Simulink and Power System Block set toolboxes.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.665-669
• /
• 2004

Generally, Slotless PM BLDC drive system is necessary that the three Hall-ICs evenly be distributed around the stator circumference and encoder be installed in case of the 3 phase motor. So, the Hall-ICs are set up in this motor to detect the main flux from the rotor, and the output signal from Hall-ICs is used to drive a power transistor to control the winding current. However, instead of using three Hall-ICs and encoder, we used only two Hall-ICs for the permanent magnet rotor position and for the speed feedback signals, and also for a microcontroller of 16-bit type (80C196KC) with the 3 phase Slotless PM BLDC whose six stator and two rotor designed. Two Hall-IC Hc and $H_B$ are placed on the endplate at 120 degree intervals, and with these elements, we can estimate information of the others phase in sequence through a rotating rotor.