• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9C
• /
• pp.889-896
• /
• 2006

The crest factor distribution of orthogonal frequency division multiplexing (OFDM) symbol sequences is evaluated and it is shown that OFDM symbol sequences with a short period are expected to have a high crest factor. The crest factor relationship between two input symbol sequences, Hamming distance D apart is also derived. Using these two results, we propose two criteria for a phase sequence set of the selected mapping (SLM) scheme and suggest the rows of the cyclic Hadamard matrix constructed from an m-sequence as the near optimal phase sequence set of the SLM scheme.

• Journal of Korean Society of Transportation
• /
• v.14 no.2
• /
• pp.45-58
• /
• 1996

In a large signal intersection, it is the most important to set phase sequences and phase intervals of traffic signal in order to improve the efficiency of the capacity as well as safety. These setting allows to select the best sequence of signal phase among several alternatives, and thus to rearrange the starting and ending points of the individual phase using an effective interphase periods (EIP). The EIP is a gap between previous and current traffic movements at a potential collision point in an intersection. Each of traffic movements has an equality for safety and efficiency at the balanced condition of EIP. This paper presents how to set optimally the phase sequences and intervals of traffic signal in an intersection using phase based approach. And in the second part, we applied the theory developed in the first part. In particular, a numerical example of phase base signal setting is presented using a matrix computation method in order to select the best sequence among several alternatives, and thus to rearrange the starting and ending points of the individual phase using the EIP. This method also allows to apply to optimum signal setting even in five-lag or staggered-type intersection.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2C
• /
• pp.153-157
• /
• 2009

In this paper, for even integer N, we propose a new construction method of quaternary low correlation zone(LCZ) sequence set from a binary LCZ sequence set with parameters (N,M,L,$\varepsilon$). Proposed method applies the inverse gray mapping from Krone and Sarwate to binary LCZ sequences and their phase shifts. The only needed condition of binary LCZ sequence set used in this construction is even period.

• Journal of KIISE
• /
• v.45 no.3
• /
• pp.200-210
• /
• 2018

Given a set of DNA read sequences, de novo sequence assembly reconstructs a target sequence without a reference sequence. For reconstruction, the assembly needs the overlap phase, which computes all overlaps between every pair of reads. Since the overlap phase is the most time-consuming part of the whole assembly, the performance of the assembly depends on that of the overlap phase. There have been extensive studies on the overlap phase in various fields. Among them, three state-of-the-art results for the overlap phase are Readjoiner, SOF, and Lim-Park algorithm. Recently, a rapid development of sequencing technology has made it possible to produce a large read dataset at a low cost, and many platforms for generating a DNA read dataset have been developed. Since the platforms produce datasets with different statistical characteristics, a performance evaluation for the overlap phase should consider datasets with these characteristics. In this paper, we compare and analyze the performances of the three algorithms with various large datasets.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.211-222
• /
• 1998

Parametric design is an important modeling paradigm in CAD/CAM applications, enabling efficient design modifications and variations. One of the major issues in parametric design is to develop a geometric constraint solver that can handle a large set of geometric configurations efficiently and robustly. In this appear, we propose a new approach to geometric constraint solving that employs a graph-based method to solve the ruler-and-compass constructible configurations and a numerical method to solve the ruler-and-compass non-constructible configurations, in a way that combines the advantages of both methods. The geometric constraint solving process consists of two phases: 1) planning phase and 2) execution phase. In the planning phase, a sequence of construction steps is generated by clustering the constrained geometric entities and reducing the constraint graph in sequence. in the execution phase, each construction step is evaluated to determine the geometric entities, using both approaches. By combining the advantages of the graph-based constructive approach with the universality of the numerical approach, the proposed approach can maximize the efficiency, robustness, and extensibility of geometric constraint solver.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.103-105
• /
• 2008

In grid-interconnection system, a fast, robust and precise phase angle detector is most important to grid synchronization and the active power control. The phase angle can be easily estimated by synchronous dq PLL system. On the other hand under unbalanced voltage condition, synchronous dq PLL system has problem that harmonics occur to phase angle or magnitude of grid voltage because of the effect of the negative sequence components. So, To eliminate the negative sequence components, the PLL method using APF (All Pass Filter) in a stationery reference frame to extract positive sequence components under unbalanced voltage condition is researched. In this paper, we propose a new PLL method with decoupling network using APF in a synchronous reference frame to extract the positive sequence components of the grid voltage under unbalanced grid. The cut-off frequency of APF in a synchronous reference frame can be set to twice of the fundamental frequency comparing with that of APF in a stationery reference frame which is the fundamental frequency. The proposed PLL strategy can detect the phase angle quickly and accurately under unbalanced gird voltages. Simulation and experimental results are presented to verify the proposed strategy under different kind of voltage dips.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.586-590
• /
• 2001

In this paper, a novel control scheme compensating source voltage unbalance and harmonic currents for hybrid active power filters is proposed, where no low/high-pass filters are used in compensation voltage composition. The phase angle and compensation voltages for source harmonic current and unbalanced voltage components are derived from the positive sequence component of the unbalanced voltage set, which is simply obtained by using digital all-pass filters. Since a balanced set of the source voltage obtained by scaling the positive sequence components is used as reference values for source current and load voltage, it is possible to eliminate the necessity of low/high-pass filters in the reference generation. Therefore the control algorithm is much simpler and gives more stable performance than the conventional method. In addition, the source harmonic current is eliminated by compensating for the harmonic voltage of the load side added to feedback control of the fundamental component.

• Microbiology and Biotechnology Letters
• /
• v.25 no.6
• /
• pp.560-565
• /
• 1997

DNA fragment assembly is a major concem in shot-gun DNA sequencing project. It is to reconstruct a consensus DNA sequence from a collection of random oritented fragments. We developed a computer program that is useful for DNA fragment assembly. Inputs to the program are DNA fragment sequences including IUB-IUPAC bases. The program produces the most probable reconstruction ot the original DNA sequence as a text format or a PostScript format. The program consists of four phases: the first phase quickly eliminates fragment pairs that can not possibly overlap. In the second phase, the quality of overlap between each pair is calculated to a score. In the third phase, overlap pairs are sorted by their scores and consistency of the overlaps is checked. The last phase determines consensus sequences and displays them. The performance of fragment assembly program was tested on a set of DNA fragment sequences which were generated from long DNA sequences of GenBank by a fragmentation program.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.11a
• /
• pp.111-115
• /
• 1998

A phase-shifting projection moire method particularly intended for high-speed three-dimensional shape reconstruction of diffuse objects is presented. Emphasis is on realization of phase-shifting fringe analysis in projection moire topography using a set of line grating pairs designed to provide different phase shifts in sequence. Further a time-integral fringe capturing scheme is devised to remove undesirable high frequency original grating patterns in real-time without time-consuming software image processing. Finally the performances of the proposed method are discussed with measurement results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.7
• /
• pp.1193-1203
• /
• 2016

This paper proposes a droop control scheme to compensate the unbalanced line-to-line voltage of unbalanced 3-phase load which is coupled with two inverter-based distributed generations through unequal impedance lines. Unbalanced line-to-line load voltages occur due to using single-phase loads, which brings about bad effects on the coupled inverters and the distributed generations. In order to compensate the unbalanced line-to-line voltages, a positive sequence voltage control was used for sharing the active and reactive power and a negative sequence control was used for reducing the negative sequence voltage. The feasibility of the proposed scheme was first verified by computer simulations, and then experiments with a hardware set-up built in the lab. The experimental results were compared with the simulation results to confirm the feasibility of the proposed scheme.