• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.288-295
• /
• 2019

Rectifiers are widely used in industrial applications. Although detailed models of rectifiers are usually used to evaluate their performance, they are complex and time-consuming. Therefore, the Average Value Model (AVM) has been introduced to meet the demand for a simple and accurate model. This type of rectifier modeling can be used to simplify the simulations of large systems. The AVM of diode rectifiers has been an area of interest for many electrical engineers. However, healthy diode rectifiers are only considered for average value modeling. By contrast, faults occur frequently on diodes, which eventually cause the diodes to open-circuit. Therefore, it is essential to model bridge rectifiers under this faulty condition. Indeed, conventional AVMs are not appropriate or accurate for faulty rectifiers. In addition, they are significantly different in modeling. In this paper, a novel application of the parametric average value of a three-phase line-commutated rectifier is proposed in which one diode of the rectifier is considered open-circuited. In order to evaluate the proposed AVM, it is compared with experimental and simulation results for the application of a brushless synchronous generator field. The results clearly demonstrate the accuracy of the proposed model.

• 조명전기설비학회논문지
• /
• 제16권5호
• /
• pp.14-21
• /
• 2002

본 논문은 4상과5상 하이브리드형 스텝모터의 모델링, 특성해석 및 디텐트 토크에 대한 고조파 저감을 대상으로 연구하였다. 이를 위하여 기계적인 모델링을 도출하였으며 자계해석을 위해서 퍼미언스법을 이용하였다. 이러한 해석 결과 본 모델에 대한 디텐트 토크를 얻을 수 있었다. 또한 두 모델 구조에 대한 상차의 특성해석 비교를 통하여, 본 모델에 대한 디텐트 토크를 유도해 낼 수 있었다. 이때 5상 스텝모터는 4상 스텝모터에 비하여 디텐트 토크의 감소와 스텝응답이 개선됨을 알 수 있었다. 해석결과 퍼미언스분포의 크기는 평균토크의 발생에 영향을 미치며, 고조파성분의 크기가 토크 리플의 크기를 발생함을 알 수 있었다.

• Journal of Ship and Ocean Technology
• /
• 제5권2호
• /
• pp.1-13
• /
• 2001

Data in one Product Model for shipbuilding is inevitably referenced and manipulated during each phase of design or production activities, and data or manipulation status naturally varies from the original with the advance of each activities. For Object-Oriented approach, it is hard to identify classes dealing with those variations, and even if once a product model is developed, it might be getting much harder to modify it to cope with a new additional phase of activities. This paper proposes an Instance-Oriented Modeling Method, temporarily named “Concept-Relationship Modeling Approach”, which handles Data structure and Behavior independently of each other in order to resolve the difficulties above.

• 한국통신학회논문지
• /
• 제12권3호
• /
• pp.285-291
• /
• 1987

Seisimic wave가 지하 내부로 전파되어 갈 때 점차적으로 에너지를 상실함으로써 attenuation현상을 일으킨다. Seismic wave의 velocity를 complex number로 표시하여 실수부는 phase velocity, 허수부는 attenuation 상수로 하여 attenuation특성을 수치적으로 modeling하는 방법을 제시하였다. 이 방법은 주파수와 독립적으로 로그특성으로 감쇄해가는 매질 속에서의 파동의 전파를 modeling한다. 본 연구는 attenuation을 위치함수로 표시하여 순방향 및 역방향 numerical modeling에 응용하여 FFT계산때 발생하는 wrap-arround noise 를 효율적으로 제거함으로써 memory space를 절약하고 computing time을 감소시킬 수 있음을 잘 보여주고 있다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제1권1호
• /
• pp.46-50
• /
• 1996

In order to design industrial scale reactors and proceises for multi-phase biocatalytic reactions, it is essential to understand the mechanisms by which such systems operate. To il-lustrate how such mechanisms can be modeled, the hydrolysis of the primary ester groups of triglycerides to produce fatty acids and monoglycerides by lipased (glycerol-ester hydrolase) catalysis has been selected as an example of multiphase biocatalysis. Lipase is specific in its behavior such that it can act only on the hydrolyzed (or emulsified) part of the substrate. This follows because the active center of the enzyme is catalytically active only when the substrate contacts it in its hydrolyzed form. In other words, lipase acts only when it can shuttleback and forth between the emulsion phase and the water phase, presumably within an interphase or boundary layer between these two phases. In industrial applications lipase is employed as a fat splitting enzyme to remove fat stains from fabrics, in making cheese, to flavor milk products, and to degrade fats in waste products. Effective use of lipase in these processes requires a fundamental understanding of its kinetic behavior and interactions with substrates under various environmental conditions. Therefore, this study focuses on modeling and simulating the enzymatic activity of the lipase as a step towards the basic understanding of multi-phase biocatalysis processes.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1396-1406
• /
• 2016

A novel controller design is presented for the recently proposed electric springs (ESs). The dynamic modeling is analyzed first, and the initial Bode diagram is derived from the s-domain transfer function in the open loop. The design objective is set according to the characteristics of a minimum phase system. Step-by-step optimizations of the Bode diagram are provided to illustrate the proposed controller, the design of which is different from the classical multistage leading/lagging design. The final controller is the accumulation of the transfer function at each step. With the controller and the recently proposed δ control, the critical load voltage can be regulated to follow the desired waveform precisely while the fluctuations and distortions of the input voltage are passed to the non-critical loads. Frequency responses at any point can be modified in the Bode diagram. The results of the modeling and controller design are validated via simulations. Hardware and software designs are provided. A digital phase locked loop is realized with the platform of a digital signal processor. The effectiveness of the proposed control is also validated by experimental results.

• 한국디지털건축인테리어학회논문집
• /
• 제11권4호
• /
• pp.29-38
• /
• 2011

In this study, neighborhood facility and office building to target two cases were performed BIM process. In the initial design phase of the planning process was conducted for the BIM process modeling, BIM in the design stage while performing the required range and level of the process were studied. Accordingly, from architectural firms to leverage BIM process, the proposed methods, efficient use of the modeling process proposed. Quality management information and input for the modeling and design process should be determined from the initial design and construction, including, for each field should be considered BIM, which require an appropriate range of information, according to these requirements, BIM creation and expansion of the level of information should be clearly defined. Perform the procedure for BIM in the process of communicating with stakeholders is critical. In addition, the input data and output data needed to perform management and to perform at the level obtained BIM design process and the model should be clear.

• International Journal of Fluid Machinery and Systems
• /
• 제2권4호
• /
• pp.315-323
• /
• 2009

Pressure oscillations triggered by the unstable interaction of dynamic flow features of the hydraulic turbine with the hydraulic plant system - including the electrical design - can at times reach significant levels and could lead to damage of plant components or could reduce component lifetime significantly. Such a problem can arise for overload as well as for part load operation of the turbine. This paper discusses an approach to analyze the overload high pressure oscillation problem using computational fluid dynamic (CFD) modeling of the hydraulic machine combined with a network modeling technique of the hydraulic system. The key factor in this analysis is the determination of the overload vortex rope volume occurring within the turbine under the runner which is acting as an active element in the system. Two different modeling techniques to compute the flow field downstream of the runner will be presented in this paper. As a first approach, single phase flow simulations are used to evaluate the vortex rope volume before moving to more sophisticated modeling which incorporates two phase flow calculations employing cavitation modeling. The influence of these different modeling strategies on the simulated plant behavior will be discussed.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.197.2-197.2
• /
• 2011

Preliminary analysis on the modeling conditions and the simulation results is conducted only to evaluate the correctness of the simulation configuration further to apply for the LASGIT project. Except for the unrealistic modeling conditions for the relations of capillary pressure and relative permeability against water saturation used previously, the simulation results successfully demonstrate Helium propagation typical for two-phase flow. Further elaborated simulation with more realistic parameters should complete the weak points of the preliminary work.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.86-88
• /
• 2002

The mathematical model was proposed to simulate ozone transport and remediation in unsaturated soils contaminated with phenanthrene. Soil column experiments were also carried out to calibrate the mathematical model. The experimental results successfully matched with the modeling results in various soil conditions. The model proposed nondimensional fraction factor to reveal reactivity between phenanthrene and gas phase ozone and liquid phase ozone. From sensitivity analysis, the fraction factor and stoichiometric coefficient decreased as water content increased. Simulation results showed increased SOM content retarded the ozone transport and the phenanthrene removal due to increased ozone consumption.