• 한국해양공학회지
• /
• 제28권6호
• /
• pp.517-526
• /
• 2014

The leakage of cryogenic LNG through cracks in the insulation membrane of an LNG carrier causes the hull structure to experience a cold spot as a result of the heat transfer from the LNG. The hull structure will become brittle at this cold spot and the evaporated natural gas may potentially lead to a hazard because of its flammability. This paper presents a computational model for the LNG flow and heat diffusion in an LNG insulation panel subject to leakage. The temperature distribution in the insulation panel and the speed of gas diffusion through it are simulated to assess the safety level of an LNG carrier subject that experiences a leak. The behavior of the leaked LNG is modeled using a multiphase flow that considers the mixture of liquid and gas. The simulation model considers the phase change of the LNG, gas-liquid multiphase interactions in the porous media, and accompanying rates of heat transfer. It is assumed that the NO96-GW membrane storage is composed of glass wool and plywood for the numerical simulation. In the numerical simulation, the seepage, heat diffusion, and evaporation of the LNG are investigated. It is found that the diffusion speed of the leakage is very high to accelerate the evaporation of the LNG.

• 방송공학회논문지
• /
• 제19권2호
• /
• pp.195-204
• /
• 2014

이 논문에서는 순환정상 프로세스의 고차 통계 특성을 바탕으로 2-FSK, 4-FSK, 8-FSK, MSK, BPSK, QPSK, 8-PSK, 16-QAM, 32-QAM, 64-QAM 등 10개의 기저대역 디지털 변조신호를 자동으로 인식하는 방법을 제안하였다. 변조신호의 고유한 성질을 나타내는 특징변수로는 1차 순환 모멘트와 고차 순환 큐뮬런트를 이용하였다. 제안한 변조인식기는 크게 두 단계로 구성되며, 첫 번째 단계에서는 1차 순환 모멘트가 나타내는 첨두치를 이용하여 M-FSK와 비FSK로 변조신호를 분류한다. 두 번째 단계에서는 비FSK를 분류하기 위해 고차 순환 큐뮬런트 값을 이용하는 Gaussian 혼합 모델 기반의 분류기를 적용하였다. 제안한 방법의 성능을 검증하기 위해서 모의실험을 실시하였다. 모의실험 결과 제안한 분류기는 주파수와 위상 옵셋이 존재하는 환경에서도 우수한 분류확률을 나타내었다.

• Preventive Nutrition and Food Science
• /
• 제14권3호
• /
• pp.233-239
• /
• 2009

The effects of guar gum (GG) and xanthan gum (XG) at different concentrations (0, 0.2, 0.4, and 0.6% w/w) on the rheological properties of Korean waxy rice starch (WRS) pastes were evaluated under both steady and dynamic shear conditions. The flow properties of WRS-gum mixtures were determined from the rheological parameters of the power law model. The addition of GG and XG to WRS resulted in an increase in the apparent viscosity ($\eta_{a,100}$) and consistency index (K) values obtained from power law model. The flow behavior index (n) values of the WRS-XG mixtures decreased with an increase in gum concentration while there was only a marginal difference between n values for the WRS-GG mixtures. Dynamic moduli (G', G", and $\eta^*$) values in the WRS-gum mixture systems also increased with an increase in gum concentration. WRS-XG mixtures had higher dynamic moduli and lower tan $\delta$ (ratio of G"/G') values than WRS-GG mixtures, indicating that the higher dynamic rheological properties of WRS-XG can be attributed to an increase in the viscoelasticity of the continuous phase in the starch-gum mixture systems, which was due to the higher viscoleastic properties of XG compared to GG. The dynamic ($\eta^*$) and steady shear ($\eta_a$) viscosities of the WRS-XG paste at a 0.2% gum concentration followed the Cox-Merz superposition rule.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2929-2934
• /
• 2007

Prediction methods for cavitation noise are presented. At first, direct numerical simulation of cavitating flow noise has been performed, and acoustic analogy equation based on the cavitation noise modeling is derived. For the direct numerical simulation, a density based homogenous equilibrium model is employed to simulate cavitating two-phase flow and the governing equations are solved with high-order numerical schemes to resolve cavitation noise. The compressible Navier-Stokes equations for mixture fluids are discretized with a sixth-order central compact scheme, and the steep gradient of flow variables and supersonic regions are treated with the selective spatial filtering technique. The direct simulation of cavitating flow noise is performed for a 2D circular cylinder at cavitation number 0.7 and 1. The far-field noise is also predicted with the derived analogy equation. Noise spectrum predicted with the equation is well compared with the result of direct numerical simulation and also agree well with the theory.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.492-501
• /
• 1994

This study is an analysis of the turbulent diffusion flame with swirl flow and the calculated results are compared with experimental data in case of various swirl numbers and air-fuel rations. The mathematical model is restricted to single-phase, diffusion controlled combustion with swirl flow. Values of local flow properties were obtained by solving appropriate differential equation for continuity, momentum, stagnation enthalpy, concentration, turbulence energy, dissipation rate of turbulence energy, and the mean square of concentration fluctuation. The method is proposed for calculating the local probability of chemical reaction based on the use of the probability density function for the mixture fraction.

• 한국유체기계학회 논문집
• /
• 제20권2호
• /
• pp.26-31
• /
• 2017

In the present study, 20 kW turbine for OTEC with a ejector and a motive pump is designed and performance prediction is implemented by means of CFD. The meridional analysis for initial geometry and CFD for detail design are used to design the turbine. This turbine has about 90.9% efficiency and 28.47 kW power at 15,000 rpm and pressure ratio of 1.53. Homogeneous mixture model is used because two phase flow can be occurred in the turbine. Performance evaluation is carried out and then results are presented by plotting of power, mass flow rate and efficiency as varying pressure ratio and rotational speed.

• 한국식품과학회지
• /
• 제22권2호
• /
• pp.177-182
• /
• 1990

역류분배방법을 이용한 단백질의 분리정제 효율을 높이기 위하여, 4가지 모델단백질에 대하여 수용성액체 2상계에서의 분획계수를 KCl 농도와 pH변화에 따라 조사하였다. 또한, 역류분배방법을 이용한 다중분배 추출방식으로 모델단백질의 혼합물을 KCl 농도(0, 50, 250, 500mM)와 pH(4.5, 5.5, 6.5, 9.0, 12.0)를 달리한 20가지 조건에서 분획하였다. 그 결과 KCl 농도와 pH에 따라 단백질들의 분획계수(K)값이 다르게 나타나서, KCl을 첨가함으로서 역류분배방법을 이용한 단백질 분리효율을 향상시킬 수 있는 가능성을 보여 주었다. 단백질에 따라 분리가 잘 일어나는 KCl 농도와 pH는 다르게 나타나서 myoglobin의 경우 KCl 50mM, pH5.5조건의 14번 튜브 상층부와 KCl 250mM, pH6.5조건의 13번 튜브의 상층부에서 잘 분리가 되었으며, BSA의 경우는 KCl 250mM, pH4.5 조건의 14번 튜브에서 분리되었고, lysozyme의 경우는 KCl 50MM, pH4.5조건의 19번 튜브와 KCl 50mM, pH5.5의 16번 튜브 상층부에서 분리가 되었다.

• 대한화학회지
• /
• 제29권4호
• /
• pp.365-371
• /
• 1985

이온쌍크로마토그래피에 의한 유기 및 무기음이온을 분리하는데 반대이온으로서 양이온 염료인 메틸렌 부루$(MTB^+)$를 사용하여 흡수가 되지 않는 음이온 시료를 간접적으로 분광광도 검출기로서 가시영역인 665nm에서 검출할 수 있었으며 혼합시료의 분리를 시도한 결과 좋은 분리도와 높은 감도를 보여주었다. 또한 여러 실험조건에서 분리인자를 측정하여 머무름 기구를 조사하였다. 본 연구에서 머무름 기구는 $MTB^+$가 고정상에 일차층(primary layer)을 형성하고 반면 음이온 시료 또는 이동상에 존재하는 다른 음이온들이 경쟁적으로 이차층(secondary layer)을 형성하는 ion-interaction model임을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제74권6호
• /
• pp.809-819
• /
• 2020

For the first time, the influence of in-plane magnetic field on wave propagation of Graphene Nano-Platelets (GNPs) polymer composite nanoplates is investigated here. The impact of three- parameter Kerr foundation is also considered. There are two different reinforcement distribution patterns (i.e. uniformly and non-uniformly) while the material properties of the nanoplate are estimated through the Halpin-Tsai model and a rule of mixture. To consider the size-dependent behavior of the structure, Eringen Nonlocal Differential Model (ENDM) is utilized. The equations of wave motion derived based on a higher-order shear deformation refined theory through Hamilton's principle and an analytical technique depending on Taylor series utilized to find the wave frequency as well as phase velocity of the GNPs reinforced nanoplates. A parametric investigation is performed to determine the influence of essential phenomena, such as the nonlocality, GNPs conditions, Kerr foundation parameters, and wave number on the both longitudinal and flexural wave characteristics of GNPs reinforced nanoplates.

• Bulletin of the Korean Chemical Society
• /
• 제23권5호
• /
• pp.741-744
• /
• 2002

Single phase of multicomponent oxide ZrTiO4 film could be prepared through surface sol-gel route simply by coating the mixture of 100 mM zirconium butoxide and titanium butoxide on $Pt/Ti/SiO_2Si(100)$ substrate, following pyro lysis at $450^{\circ}C$, and annealing it at 770 $^{\circ}C.$ The dielectric constant of the film was reduced as the film thickness decreased due to of the interfacial effects caused by layer/electrode and a few voids inside the multilayer. However, the dielectric property was independent of applied dc bias sweeps voltage (-2 to +2 V).The dielectric constant of bulk film, 31.9, estimated using series-connected capacitor model was independent of film thickness and frequency in the measurement range, but theoretical interfacial thickness, ti, was dependent on the frequency. It reached a saturated ti value, $6.9{\AA}$, at high frequency by extraction of some capacitance component formed at low frequency range. The dielectric constant of bulk ZrTiO4 pellet-shaped material was 33.7 and very stable with frequency promising as good applicable devices.