• Journal of the Mineralogical Society of Korea
• /
• v.31 no.3
• /
• pp.173-182
• /
• 2018

The precipitation and phase transformation processes of iron minerals in acid mine drainage have a great influence on the behavior of trace elements in drainage. However, it is not easy to accurately trace these processes in natural environments, and therefore, most studies have carried out in the laboratory to obtain the information on the precipitation and transformation of those minerals. In this study, the precipitation of minerals and the changes of trace elements in drainage water were investigated at different pH values in actual acid mine drainage collected from the Dalsung mine. The amount of some precipitated minerals was not enough for the mineral identification. However, from the minerals identified, amorphous minerals were formed first, and then goethite was precipitated probably from schwertmannite. When the pH of the sample was high (10), amorphous phases of minerals were still observed at even high pH (pH 10). With increasing time, the pH values decreased by precipitation and transformation of minerals. All the elements showed low concentrations at high pH (8, 10), which might be due to the precipitation of minerals at high pH and the effect of surface charge, and the concentrations of elements gradually increased with time. In the case of sulfur, it also increased in water due to the transformation of schwertmannite to goethite.

• Journal of Environmental Health Sciences
• /
• v.34 no.3
• /
• pp.188-198
• /
• 2008

Since 2003, the National Institute of Environmental Research (NIER) of Korea has been conducting "The monitoring study on exposure level and biomarkers of environmental pollutants" in the Ulsan industrial complex with the goals to establish a surveillance system for residents, to evaluate the health effects associated with chronic exposure to environmental pollutants and to develop the environmental health indicators in Ulsan industrial complex. This program consists of three phases an initial or foundation phase in which the program is developed, made operational and extended to the community, followed by an evaluation and accountability assessment of the surveillance system and finally an improvement in the quality of life and the maintenance of good health for Ulsan residents. In the period 2003 to 2008, the study program developed the surveillance system which will be used for the full-length survey. All participants in this study were contacted at a presentation meeting for residents, introduced to the objectives and protocols of the survey, and asked to participate. Informed consent was obtained from each participant. The study is now underway and includes questionnaires, health examinations and the analysis/collection/banking of bio-sample such as blood and urine. To date 828 subjects have participated and already 588 subjects have been followed up. We are committed to complete health examinations and to arrange storage of biosample for all participants. During the current year, we will analyze metals (Pb in blood and Cd, inorganic As and Hg in urine) in 1,972 samples and VOCs (11 species) and PARs (18 species) in 300 samples (blood sample). Moreover, the summary of the first step and the further preparation of the second step are currently underway. In this article, we introduce the study and its protocols and the distribution and size of the study participants. In conclusion, this survey will be continuously conducted on the established cohort and will enable the identification of relationship between environmental pollutant exposures and the health status of residents in Ulsan industrial complex.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.2
• /
• pp.236-242
• /
• 2005

To develop a new detection method using irradiation-induced volatile marker compounds of red pepper powder (RP), the volatile compounds of irradiated RP (0, 1, 3, 5, and 10 kGy) were analyzed by purge and trap (P&T)/solid phase microextraction (SPME)/gas chromatography/mass spectrometry (GC/MS) methods. A total of 51 and 31 compounds were detected in IRP by SPME and P&T methods, respectively. Among these, 25 compounds, which were composed of 4 hydrocarbons, 7 aldehydes, 1 ketone, 3 alcohols, 4 aromatic compounds, 2 esters and 4 miscellaneous compounds, showed irradiation dependent manner with significant positive correlation (p<0.01 or p<0.05) between irradiation dose and relative concentration. However, all compounds except 1,3-bis(1,1-dimethylethyl)benzene were not suitable as marker compounds because of their low determination coefficients ($R^2$<0.80) between irradiation dose and their concentrations, and detectablilty in nonirradiated sample. Therefore, only one compound, 1,3-bis(1,1-dimethylethyl)benzene, was tentatively identified as a volatile marker compound to detect irradiated RP.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.3
• /
• pp.247-255
• /
• 2016

In order to select a strain that forms a Biocellulose (BC), strain producing acetic acid was selected from commercially available kombucha. Through SM broth it was confirmed that the strain is a gram negative bacteria in the form of rods having no motility through a phase contrast microscope. The result of phylogenetic inference analysis based on 16S rDNA sequence analysis for the identification of strains was most closely related to Gluconobacter uchimurae (G. uchimurae) and was named G. uchimurae GYS15 strain. The strain showed the highest degree of growth when cultured for 14 days under the conditions of pH 5 and $25^{\circ}C$. Moreover, it showed the highest degree of growth in a Glucose addition disaccharide as the optimum carbon source sucrose and fructose. Also, 0.5% NaCl, upon the addition of Malto extract, showed the highest degree of growth. Based on investigation by the optimum growth conditions to confirm the physical properties of BC obtained by culturing G. uchimurae GYS15 strains. The surface structure was observed through an scanning electron microscope (SEM) showed a high networks structure. It until $8.6{\pm}0.38$ times when the water holding capacity is re-absorbed and re-absorbed holding oil up to $6.6{\pm}0.51$ times confirmed. In conclusion, using these material properties, it was possible to confirm the possibility of a variety of cosmetic materials and mask pack materials.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.12
• /
• pp.1665-1672
• /
• 2012

An 80% ethanol extract of Hizikia fusiforme was obtained and followed by successive fractionation using the organic solvents n-hexane, ethyl acetate, and n-butanol to identify the antioxidative substance. The aqueous part of the nbutanol fractionation step, showing high antioxidative activity, was subjected to reverse-phase liquid chromatography. As a result, a substance purified from a BB-2 fraction showed high antioxidative activity. The m/z 419 [M+H] molecular ion peak in the fraction was observed by the analysis of the ESI-LC/MS spectrum. By the analysis of 1H NMR (500 MHz, DMSO-$d_6$) and $^{13}C$ NMR (125 MHz, DMSO-$d_6$) spectra, a unique compound of the fraction was biochemically identified as a 5-hydroxy-3,6,7,8,3',4'-hexamethoxyflavone (5HHMF). We also investigated the effect of 5HHMF on human gastric AGS carcinoma cells. Western blot analysis suggested that the flavone substantially increased the levels of the death receptor-associated apoptosis mediators Fas, Fas L, FADD, TRADD, and DR4 in a concentration-dependent manner. The levels of Fas, Fas L, TRADD, and DR4 in the cells treated with 5HHMF ($5{\mu}g/ml$) were approximately 26.4-, 12.8-, 6.7-, and 9.8-times higher than those of non-treated cells, respectively. Of note, the level of FADD protein in the cells exposed to 5HHMF ($1{\mu}g/ml$) increased approximately 9.6-times. In addition, the cleavage of caspase-3, -8, and -9 in cultured AGS cells treated with 5HHMF was significantly confirmed. Therefore, our results suggest that 5HHMF from H. fusiforme is involved in the induction of death receptor-associated apoptosis mediators in human gastric AGS carcinoma cells.

• Analytical Science and Technology
• /
• v.13 no.4
• /
• pp.504-510
• /
• 2000

The impurity profiles from the raw materials of glycyrrhizin were performed by the high performance liquid chromatography (HPLC)/electrospray ionization (ESI)- mass spectrometry (MS). For the HPLC experiment, a $C_{18}$($3.9{\times}300mm$, $10{\mu}m$) column was used and the mobile phase was acetic acid/$H_2O$ (1:10):acetonitrile=3:2 with a flow rate of 0.8 ml/min. The effluent was splitted into the ratio of 50:1 and went into the ESI-MS. Three to six impurities were found and informed of the identification of the structure of the impurities by ESI-MS. And the structures of impurities were suggested to a hydroxy-glycyrrhizin which is added with hydroxy group (-OH) in the glycyrrhetic acid moiety and a reduced-glycyrrhizin which the position of 12 of the glycyrrhetic acid moiety is reduced. The purities of the standard materials were about 90%.

• The KIPS Transactions:PartC
• /
• v.8C no.6
• /
• pp.847-854
• /
• 2001

The Web continues to grow fast rate in both a large aclae volume of traffic and the size and complexity of Web sites. Along with growth, the complexity of tasks such as Web site design Web server design and of navigating simply through a Web site have increased. An important input to these design tasks is the analysis of how a web site is being used. The is paper proposes a Page logging System(PLS) identifying reliably user sessions required in Web mining system PLS consists of Page Logger acquiring all the page accesses of the user Log processor producing user session from these data, and statements to incorporate a call to page logger applet. Proposed PLS abbreviates several preprocessing tasks which spends a log of time and efforts that must be performed in Web mining systems. In particular, it simplifies the complexity of transaction identification phase through acquiring directly the amount of time a user stays on a page. Also PLS solves local cache hits and proxy IPs that create problems with identifying user sessions from Web sever log.

• Journal of Food Hygiene and Safety
• /
• v.33 no.2
• /
• pp.118-123
• /
• 2018

The objective of this study was to develop a sensitive method for the identification and determination of nitrovin in fishery products by using a solid-phase extraction (SPE), as performed with a liquid chromatography-tandem mass spectrometry (LC-MS/MS). The samples were extracted with a mixture of acetonitrile and water, and were then defatted with acetonitrile saturated hexane, after which further clean-up was accomplished with SPE on the hydrophilic-lipophilic balance (HLB) cartridges. The analytes were subsequently ionized in the positive mode of an electrospray ionization (ESI), and where thereby detected in a process of multiple reaction monitoring (MRM). The linearity (expressed as correlation coefficients) of the matrix calibration curves was > 0.985. The limit of the quantification for the nitrovin was measured at 0.001 mg/kg. The accuracy (expressed as average recovery) was noted between 72.1 and 122%. The precision (expressed as coefficient variation) was noted from 2.9 to 16.9%. According to the CODEX CAC/GL-71 guideline accuracy, precision, linearity, and limit of detection were determined in three matrices (which were flatfish, eel and shrimp). The proposed method was suitable for analyzing the associated nitrovin residues. This application and result can also be a factor to contribute to the non-detection drugs management in fishery products.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3367-3378
• /
• 2021

The design phase and safety assessment of Generation IV liquid metal-cooled fast reactors calls for the improvement of fuel pin performance codes, in particular the enhancement of their predictive capabilities towards uranium-plutonium mixed oxide fuels and stainless-steel cladding under irradiation in fast reactor environments. To this end, the current capabilities of fuel performance codes must be critically assessed against experimental data from available irradiation experiments. This work is devoted to the assessment of three European fuel performance codes, namely GERMINAL, MACROS and TRANSURANUS, against the irradiation of two fuel pins selected from the SUPERFACT-1 experimental campaign. The pins are characterized by a low enrichment (~ 2 wt.%) of minor actinides (neptunium and americium) in the fuel, and by plutonium content and cladding material in line with design choices envisaged for liquid metal-cooled Generation IV reactor fuels. The predictions of the codes are compared to several experimental measurements, allowing the identification of the current code capabilities in predicting fuel restructuring, cladding deformation, redistribution of actinides and volatile fission products. The integral assessment against experimental data is complemented by a code-to-code benchmark focused on the evolution of quantities of engineering interest over time. The benchmark analysis points out the differences in the code predictions of fuel central temperature, fuel-cladding gap width, cladding outer radius, pin internal pressure and fission gas release and suggests potential modelling development paths towards an improved description of the fuel pin behaviour in fast reactor irradiation conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.268-277
• /
• 2019

Flight test systems should monitor various conditions in real time during flight tests and take safety measures in an emergency. The importance of ensuring test safety increases in more complicated and wider test environments. Also, due to the transition of wartime operational authority, many guided missile systems must be developed simultaneously. Early deployment and budget reduction by shortening the development and T&E periods are also necessary. Consequently, the risk of flight tests under the circumstance of inefficient test resources is increasing. To address this deficiency, a flight test system model using SysML was proposed in this study. The method of designing and verifying the test system is based on the agile shift left testing methodology of advanced T&E labs and utilizing a system reference model in the aerospace field. Through modeling and simulation analysis, early identification and correction of faults resulting from inconsistent test requirements can mitigate the risk of delays during the T&E phase of flight tests. Also, because the flight test system model was constructed using SysML, it can be applied to test various guided missile systems.