• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.41-43
• /
• 2005

The single-phase SRM(switched reluctance motor) has only one inductance variation and the positive torque is not generated in all section. So, the single-phase SRM can be started by itself if the rotor is placed at the positive slope of inductance variation by the starting device. In the previous study, equation of the magnetic force of the starting device at the acting point is derived. This paper describes the calculation of the magnetic force at the acting point by making an experiments.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.361-377
• /
• 1998

The measurement of welding temperature of connector is usually performed with an infra red temperature gauge. However, the factors, which influence the temperature measurement, are rarely known. This research used the welding temperature measurement of the connector as an example, applying the experimental design, in two-phase experiments, to search the affecting factors. In phase-I experiment, we used a resolution III, seven-factor fractional factorial design with two levels for each factor. The result showed that none of the factor was significant in affecting the welding temperature when the type I error ${\alpha}$ was 0.05. Next, we did the phase-II factorial experiment with three factors and each factor had three levels. The experiment showed the experimental time was significant in affecting the temperature measurement when the type I error ${\alpha}$ was 0.05. Further Duncan's multiple range tests on the second experimental data showed that the later the experimental time, the weaker the light intensity could have on the temperature measurement and the average of the highest temperatures was lower. Moreover, the later the experimental time, the smaller was the variance of the temperature measurement and the difference between the averages of the highest and the lowest temperatures was also lower.

• 한국항공우주학회지
• /
• 제41권11호
• /
• pp.855-864
• /
• 2013

능동 탭은 BVI 소음 저감을 위한 능동제어 기술 중 하나이며, 이를 이용한 소음 저감효과에 대한 해석은 기술 개발에 있어서 매우 중요한 과정의 하나이다. 능동 탭의 소음저감 성능 분석을 위하여 모델 로터시스템에 대한 구조 설계를 수행하고 CFD 해석을 통해 에어포일 공력 데이터를 생성하였으며, 이를 이용하여 통합해석 프로그램인 CAMRAD II 모델을 구성하였다. 하강 비행 상태에서 능동 탭을 HHC 방법으로 작동할 경우 로터에서 발생되는 공력 하중을 CAMRAD II를 이용하여 계산하고, 이에 따른 BVI 소음 변화를 자체 소음해석 프로그램으로 계산하였다. 능동 탭의 작동 길이 및 제어 위상의 변화에 따른 소음해석 결과 최대 -3.3dB의 BVI 소음 저감 효과를 얻을 수 있었다.

• 항공우주기술
• /
• 제13권1호
• /
• pp.70-75
• /
• 2014

액체 로켓 엔진에 대한 에너지 밸런스 해석, 모드 해석, 비정상 해석 프로그램을 소개하였다. 유사 프로그램에 대한 결과, 공개된 실험 결과와 비교하여 해석 방법을 검증하였다. 에너지 밸런스 해석은 초기 개발 단계에서 활용된다. 모드 해석은 엔진 작동 조건, 시험조건 설정 및 엔진 성능 분산 분야에 활용된다. 비정상 해석을 통하여 추진제 유량, 추력, 비정상 조건에 대한 임펄스를 예측할 수 있다. 비정상 해석은 시동/종료 시퀀스 설정에 필수적이다. 본 해석 프로그램들은 한국형 발사체 엔진 개발에 활용될 것이다.

• 한국시뮬레이션학회논문지
• /
• 제21권4호
• /
• pp.1-9
• /
• 2012

본 논문에서는 유한 용량 자동생산 시스템의 효율적인 운용을 위하여 기존에 제안된 은행가(BA) 알고리즘의 단점을 개선시킨 2단계 Look-ahead 은행가 알고리즘을 제안하였다. 제안된 알고리즘은 각 job 단위 별 전체 남은 공정의 처리 가능성뿐만 아니라 job들 간의 부분적인 이동 가능성을 동시에 고려하여 시스템 내부에 존재하는 job들의 완성 가능성을 결정함으로서 기존 알고리즘의 안전 상태 식별 능력을 향상시켰다. 수치 실험을 통해 제안된 알고리즘의 향상된 성능을 (i) 안전 상태 탐색율과 (ii) 시스템 Throughput을 기준으로 확인하였으며, paired t-test를 통해 검증하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권7호
• /
• pp.979-986
• /
• 2016

This experiment was conducted to investigate the effects of dried mealworm (Tenebrio molitor larva) on growth performance, nutrient digestibility and blood profiles in weaning pigs. A total of 120 weaning pigs ($28{\pm}3days$ and $8.04{\pm}0.08kg$ of body weight) were allotted to one of five treatments, based on sex and body weight, in 6 replicates with 4 pigs per pen by a randomized complete block design. Supplementation level of dried mealworm was 0%, 1.5%, 3.0%, 4.5%, or 6.0% in experimental diet as treatment. Two phase feeding programs (phase I from 0 day to 14 day, phase II from 14 day to 35 day) were used in this experiment. All animals were allowed to access diet and water ad libitum. During phase I, increasing level of dried mealworm in diet linearly improved the body weight (p<0.01), average daily gain (ADG) (p<0.01) and average daily feed intake (ADFI) (p<0.01). During phase II, ADG also tended to increase linearly when pigs were fed higher level of dried mealworm (p = 0.08). In addition, increasing level of dried mealworm improved the ADG (p<0.01), ADFI (p<0.05) and tended to increase gain to feed ratio (p = 0.07) during the whole experimental period. As dried mealworm level was increased, nitrogen retention and digestibility of dry matter as well as crude protein were linearly increased (p = 0.05). In the results of blood profiles, decrease of blood urea nitrogen (linear, p = 0.05) and increase of insulin-like growth factor (linear, p = 0.03) were observed as dried mealworm was increased in diet during phase II. However, there were no significant differences in immunoglobulin A (IgA) and IgG concentration by addition of dried mealworm in the growth trial. Consequently, supplementation of dried mealworm up to 6% in weaning pigs' diet improves growth performance and nutrient digestibility without any detrimental effect on immune responses.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.47-52
• /
• 1998

This study deals with guidance and control laws for an optimal reentry trajectory of a vertical landing reusable launch vehicle (RLV) in the future. First, a guidance law is designed to create the reference trajectory which minimizes propellant consumption. Then, a nonlinear feedback controller based on a linear quadratic regulator is designed to make the vehicle follow the predetermined reference trajectory, The proposed method is simulated for the first stage of the H-II scale rocket.

• 방사성폐기물학회지
• /
• 제11권2호
• /
• pp.115-131
• /
• 2013

미즈나미 지하처분연구시설 프로젝트는 일본원자력연구개발기구가 결정질암 내의 심부 지하 환경에 관해 종합적으로 연구하는 프로젝트이다. 미즈나미 프로젝트는 3개의 중첩되는 단계로 구성된다: 지표기반 조사단계 (단계 1), 건설단계 (단계 2), 운영단계 (단계 3)의 총 20년. 미즈나미 프로젝트의 1단계에서 3단계까지의 전체 목표는 1) 심부지질환경을 조사, 분석, 평가하기 위한 기술 정립, 2) 심부 지하 활용을 위한 일련의 공학적 기술 개발이다. 전체 목표 1을 달성하기 위하여, 1단계 목표를 굴착 전에 지질환경을 모사하고 굴착거동을 예측하는 모든 지표기반 조사결과로부터 지질환경 모델을 구축하는 것으로 설정하였다. 전체 목표 2를 달성하기 위하여, 2단계 목표는 지하시설을 위한 상세 설계 개념과 건설 계획을 수립하는 것으로 설정하였다. 본 논문은 결정질암내 지하수의 수리지화학적 특성을 조사하고 평가하기 위한 지질통합적 방법을 소개한다.

• 한국염색가공학회지
• /
• 제17권3호
• /
• pp.26-33
• /
• 2005

EVA microsphere was prepared by a thermally induced phase separation. EVAL microsphere was made by a saponification on sheath of EVA microsphere. And microcapsule with EVA core-PU shell structure was synthesized by interfacial polymerization using diisocyanates with PEG in gelatin aqueous solution as the stabilizing agent. The effects of chemical structure of diisocyanate on the average particle size and distribution, morphology, color strength and friction fastness of core-shell particles were investigated to design microcapsule. The friction fastness of the fabrics printed with EVA core-PU shell microcapsules had the 4-5 grade.

• 전자공학회논문지A
• /
• 제32A권2호
• /
• pp.48-56
• /
• 1995

The operating characteristics, such as, the threshold gain, lasing frequency, and longitudinal intensity profile, etc., of 1.55$\mu$m DFB laser diode with index and/or gain grating structures and with one side AR-coated mirror have been analyzed. From this analysis, the optimum design parameters have been shown that ${\Delta}{\Omega}$ (the phase difference between index grating and gain grating) is 0 or ${\pi}$, (xL)$_{r}$=1~3 and (xL)$_{i}$=0.5~0.9. It has been also shown that the modal selectivity and intensity uniformity of the DFB lasers with .DELTA..OMEGA.=0 are ~1.2 times better thatn those of the DFB lasers with ${\Delta}{\Omega}$= ${\pi}$.