• Korean Journal of Construction Engineering and Management
• /
• v.25 no.2
• /
• pp.56-68
• /
• 2024

A construction standard production rates system for the factory built and on-site installation phases of OSC (Off-Site Construction)-based precast concrete (PC) structures in apartment buildings was recently proposed to establish an objective cost standard (Lee et al., 2021). In addition, the Korean government has taken steps to improve the institutional foundation for the systematic calculation of PC construction costs such as revising construction standard production rates for major components that can be applied to the on-site installation phase of PC method. In this study, we analyzed the results of a field survey of apartment building PC structures and collected expert opinions to develop factory-built and on-site installation standard production rates that can be applied to apartment building PC method. We also propose directions for improving the standard production rates so that they can be applied to the site and component of apartment buildings by comparing them with the current standard production rates. This study also derived the cost characteristics and cost reduction measures of PC construction by calculating the construction costs using the developed rates and comparing the construction costs with the RC methods of apartment buildings of the same scale. The construction standard production rates for PC construction derived in this study are expected to contribute to the spread of PC construction by ensuring the objectivity and consistency of the results of PC methods cost estimation.

• The Journal of Korean Medicine
• /
• v.45 no.1
• /
• pp.182-201
• /
• 2024

Objectives: This study was conducted to develop a standard acupotomy consent form that takes into account the unique characteristics of Korean Medicine. The study was motivated by the increasing importance of patient autonomy and the growing number of legal disputes related to medical malpractice in the clinical field of Korean Medicine. Methods: The analysis phase of the study involved a survey of the current status of acupotomy consent forms in Korean Medicine hospitals nationwide. The items of each form were analyzed based on the contents of the Medical law and the standard contract for medical procedures of the Fair Trade Commission (FTC). In the development and evaluation phase, the items and contents of the acupotomy consent form were evaluated using a 5-point Likert scale and content validity was assessed through two rounds of Delphi surveys. In the improvement phase, the contents of the consent form were revised based on the results of a survey of inpatient and outpatient patients in the Department of Acupuncture and Moxibustion at Pusan National University Korean Medicine Hospital, and real-time online meeting. The final version of the standard acupotomy consent form was completed after undergoing proofreading and corrections by a linguistics expert. Results: Only 30% of Korean Medicine hospitals have implemented acupotomy consent forms. The items of the consent forms did not fully include the items presented in the Medical act and the standard contract for medical procedures of the FTC. To address this issue, two rounds of Delphi surveys and a real-time discussion were conducted with a panel of 12 experts on 27 preliminary items of consent forms. The items and contents that met the criteria for content validity ratio, convergence, and consensus were derived. Based on the derived items and content, a standard acupotomy consent form was developed. Conclusions: The standard consent form for acupotomy is anticipated to ensure patient autonomy and enhance transparency and liability in acupotomy. Furthermore, it is expected to serve as evidence in case of medical disputes related to acupotomy and contribute as a reference document for the development of standard consents forms for various procedures of Korean Medicine. However, the limitations of the study include that the survey of consent forms was limited to only training hospitals of Korean Medicine, and the standard consent form is only applicable to adults in Korea. Future studies are needed to address these limitations.

• The Journal of Industrial Distribution & Business
• /
• v.1 no.1
• /
• pp.13-21
• /
• 2010

Since Korea establish diplomatic ties with China in 1992, korea and China have had rapid progress in most of field as politic, economy, society and culture through basing on cultural commonality and geographical adjacency. Especially, China is the biggest trading partner to korea, and also Korea is third-biggest trading country to China. They become strategic cooperating relation in 2008. Currently, in terms of international trade relation, WTO/DDA negotiation is proceeding in difficulty, but FTA has been growing and extending in the world, and the two country, china and korea, have been competitively trying wide and active FTA negotiation promotion. After Financial crisis in 1997, according to the requirement of local economic cooperation, China has shown the interest to several countries since the conclusion of FTA treaty with ASEAN in 2005. China also makes the active afford to conclude FTA with Korea. Last May 28th, this was mentioned in the meeting between president Lee and Premier Wen Jiabao, so it is anticipated that the negotiation for FTA will be started in the near future. There are many political suggestions and concerns in terms of way of negotiation korea would choose. Some economist said that "'Continuous FTA aimed at long-term protocol should be promoted between korea and China and negotiated includingly'" However, this research claims that commodity exchange, service, and investment areas should be included and it has to be comprehensive package settlement style in negotiation. This research has found out the characteristics of China's negotiation and implications through the China's existed FTA negotiation examples. Currently, China has taken Continuous or a phase-negotiation method to ASEAN, Pakistan, Chile and some other developing country and to advanced countries like New Zealand or Singapore, comprehensive package settlement method is used in FTA negotiation. In consider of the FTA negotiation between Korea and China, Korea has some problems in the commodity change area in agriculture maket's opening. While, for china, the issues would happen in service trade area, especially when encountering finance and communication industries are opened, China's economy could be exposed to some risk. In result, Korea should expand its negotiation range from commodity trade to service trade, in order to exchange both issues, then the negotiation will be concluded more easily. In other word, for FTA, korea should follow comprehensive package settlement way that is similar to New zealand and Singapore case. Through this kind of method, Korea can expect effect of creating trade, conversion of it and preoccupancy of service field in china's market against the advanced countries like Usa, Europe and Japan. Also, to have a successful FTA negotiation, korea should find out china's policy for FTA negotiation. With this information, korea will be able to suggest the way to make a profit. Systematic analysis and comparison about previous negotiation cases of china are needed before the negotiation begin.

• Geophysics and Geophysical Exploration
• /
• v.21 no.3
• /
• pp.150-161
• /
• 2018

Recently, unmanned aircraft EM (electromagnetic) survey based on ICT (Information and Communication Technology) has been widely utilized because of the efficiency in regional survey. We performed the theoretical study on the unmanned airship EM system developed by KIGAM (Korea Institute of Geoscience and Mineral resources) as part of the practical application of unmanned aircraft EM survey. Since this system has different configurations of transmitting and receiving loops compared to the conventional aircraft EM systems, a new technique is required for the appropriate interpretation of measured responses. Therefore, we proposed a method to calculate the EM field for the arbitrary shaped transmitter and verified its validity through the comparison with analytic solution for circular loop. In addition, to simulate the magnetic responses by three-dimensionally (3D) distributed anomalies, we have adapted our algorithm to 3D frequency-domain EM modeling algorithm based on the edge-FEM (finite element method). Though the analysis on magnetic field responses from a subsurface anomaly, it was found that the response decreases as the depth of the anomaly increases or the flight altitude increases. Also, it was confirmed that the response became smaller as the resistivity of the anomaly increases. However, a nonlinear trend of the out-of-phase component is shown depending on the depth of the anomaly and the used frequency, that makes it difficult to apply simple analysis based on the mapping of the magnitude of the responses and can cause the non-uniqueness problem in calculating the apparent resistivity. Thus, it is a prerequisite to analyze the appropriate frequency band and flight altitude considering the purpose of the survey and the site conditions when conducting a survey using the unmanned aircraft EM system.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.6
• /
• pp.288-292
• /
• 2009

Hydrophobic/hydrophilic patterned substrates were fabricated on a glass substrate by a liquid phase deposition (LPD) method. Hydrophobic surface was obtained by modifying ZnO thin films with a rough surface using a fluoroalkyltrimethoxysilane (FAS) and hydrophilic surface was prepared by decomposing FAS on an exposed to UV light. The hexagonal ZnO rods were perpendicularly grown by LPD method on glass substrates with a ZnO seed layer. The diameter and thickness of hexagonal ZnO rods were increased as a function of increases of immersion time. The surface morphology, thickness, crystal structure, transmittance and contact angle of prepared ZnO thin films were measured by field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), UV-visible spectrophotometer (UV-vis) and contact angle measurement. Hydrophilic ZnO thin films with a contact angle of $20^{\circ}{\sim}30^{\circ}$ were changed to a hydrophobic surface with a contact angle of $145^{\circ}{\sim}161^{\circ}$ by a FAS surface treatment. Prepared hydrophobic surface was pattered by an irradiation of UV light using shadow mask with $300\;{\mu}m$ or 3 mm dot size. Finally, the hydrophobic surface exposed to UV light was changed to a hydrophilic surface.

• Korean Journal of Materials Research
• /
• v.23 no.6
• /
• pp.309-315
• /
• 2013

$GdBa_2Cu_3O_{7-y}$(Gd123) powders were synthesized by the solid-state reaction method using $Gd_2O_3$ (99.9% purity), $BaCO_3$ (99.75%) and CuO (99.9%) powders. The synthesized Gd123 powder and the Gd123 powder with $Gd_2O_3$ addition ($Gd_{1.5}Ba_2Cu_3O_{7-y}$(Gd1.5)) were used as raw powders for the fabrication of Gd123 bulk superconductors. The Gd123 and Gd1.5 bulk superconductors were fabricated by sintering or a top-seeded melt growth (TSMG) process. The superconducting transition temperature ($T_{c,onset}$) of the sintered Gd123 was 93 K and the transition width was as large as 20 K. The $T_{c,onset}$ of the TSMG processed Gd123 was 82 K and the transition width was also as large as 12 K. The critical current density ($J_c$) at 77 K and 0 T of the sintered Gd123 and TSMG processed Gd123 were as low as a few hundreds A/$cm^2$. The addition of 0.25 mole $Gd_2O_3$ and 1 wt.% $CeO_2$ to Gd123 enhanced the $T_c$, $J_c$ and magnetic flux density (H) of the TSMG processed Gd123 sample owing to the formation of the superconducting phase with high flux pinning capability. The $T_c$ of the TSMG processed Gd1.5 was 92 K and the transition width was 1 K. The $J_cs$ at 77 K (0 T and 2 T) were $3.2{\times}10^4\;A/cm^2$ and $2.5{\times}10^4\;A/cm^2$, respectively. The H at 77 K of the TSMG-processed Gd1.5 was 1.96 kG, which is 54% of the applied magnetic field (3.45 kG).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.4
• /
• pp.329-336
• /
• 2000

Welding is a important technological method in mechanical engineering. $CO_2$MAG(metal active gas) welding means that metal part in double capstan drum for the inshore and costal vessels are joined by melting(with or without a filler material) or that new material is added to a metal part by melting. The thermal stresses appear due to a non-uniform temperature field, inhomogeneous material properties, external restraint and volume changes during phase transformations. In this study analysis the elasto-plastic thermal stresses distribution of welding part in double capstan drum for the inshore and costal vessels using finite element method (FBM). Therefore it calculates the numerical value that can be applied to the optimum design of welding parts and the shapes. The significant results obtained in this study are summarized as fellows. At early stage of the cooling after welding process, the abrupt thermal stresses gradient has been shown in the vicinity of welding part. In the thermal stresses analysis due to temperature gradient and heat shocking maximum stress was occurred of welding part and stresses were distributed from 54MPa~48MPa.

• Geophysics and Geophysical Exploration
• /
• v.9 no.2
• /
• pp.139-147
• /
• 2006

We had conducted a numerical modeling to investigate seismic properties of gas hydrate with field parameters acquired over the East sea in 1998. We used a 2-D staggered grid finite difference method to generate synthetic elastic seismograms for multi-channel seismic survey, OBC (Ocean Bottom Cable) survey and VCS (Vertical Cable Seismic) survey. The results of this study showed that the method using staggered grid yielded stable results and could be used to seismic imaging. We could find out the high amplitude anomaly and the phase reversal phenomenon of reflection wave at interface between the gas hydrate layer and free gas layer such a BSR (Bottom Simulating Reflector) which is the evidence for existence of gas hydrate in seismic reflection data. And we computed the reflection coefficients at the incident angles corresponding to offset distance with the synthetic seismograms. The reflection coefficients acquired from the numerical modeling were nearly consistent with the reflection coefficient computed by Shuey's equation.

• Journal of the Korean Geophysical Society
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2007

A method to quickly estimate broadband moment magnitudes (Mwp) to warn regional and teleseismic tsunamigenic earthquakes is tested for application of the method to the different seismic observation environment. In this study, the Mwp is calculated by integrating far-field P-wave or pP-wave of vertical component of displacement seismograms in time domain from earthquakes, having magnitude greater than 5.0 and occurred in and around the Korean peninsula from 2000 to 2006. We carefully set up the size of the time window for the computations to exclude S wave phases and other phases following after the P wave phase. The P wave velocities and the densities from the averaged Korean crustal model are used in the computations. Instrumental correction was performed to remove dependency on the seismograph. The Mwp after the instrumental correction is about 0.1 greater than the Mwp before the correction. The comparison of our results to the those of foreign agencies such as JMA and Havard CMT catalogues shows a higher degree of similarity. Thus our results provide an effective tool to estimate the earthquake size, as well as to issue the necessary information to a tsunami warning system when the effective earthquake occurs around the peninsula.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.5
• /
• pp.544-555
• /
• 2002

The aim of this study is to develop the $^1H$-MRS data postprocessing software for both single-voxel and multi-voxel technique, which plays and important role as a diagnostic tool in clinical field. This software is based on graphical user interface(GUI) under windows operating system of personal computer(PC). In case of single-voxel MRS, both of raw data in time-domain and spectrum data in frequency-domain are simultaneously displayed in a screen. Several functions such as DC correction, zero filling, line broadening, Lorentz-Gauss filtering and phase correction, etc. are included to increase the quality of spectrum data. In case of multi-voxel analysis, spectroscopic image reconstructed by 3-D FFT was displayed as a spectral grid and overlapped over previously obtained T1- or T2-weighted image for the spectra to be spatially registered with the image. The analysis of MRS peaks were performed by obtaining the ratio of peak area. In single-voxel method, statistically processed peak-area ratios of MRS data obtained from normal human brain are presented. Using multi-voxel method, MR spectroscopic image and metabolite image acquired from brain tumor are demonstrated.