• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.858-867
• /
• 2018

Analytical modeling equations are proposed for the conventional and modified three-section branch-line couplers. The analytical equations are explicit and capable of determining the characteristic impedance of each branch line for the coupler at desired coupling level as well as the suitability of broadband S-parameters analysis. In addition, a bandwidth extension and miniaturization of three-section branch-line coupler using slow-wave and meandering line structures were designed. The modified coupler, which is able to operate within frequencies from 1.5 to 3.32 GHz has been fabricated, tested and compared. A bandwidth extension of 600 MHz and 53% reduced size of the modified coupler have been achieved compared to a conventional coupler. The modified coupler has roughly insertion loss and coupling of -4 dB and -3.2 dB, while the isolation and return loss, respectively less than -14 dB with fractional bandwidth of 77 %, as well as phase imbalances less than $2^{\circ}$ over the operating bandwidth. Overall, the derived analytical model, simulation and measurement results demonstrated a good agreement.

• Journal of electromagnetic engineering and science
• /
• 제17권2호
• /
• pp.65-70
• /
• 2017

The design and implementation aspects of a new single-balanced mixer for ultra-wideband (UWB) applications are presented in this study. The proposed mixer utilizes a miniaturized UWB ring coupler as a balun, consisting of a pair of in-phase and inverted-phase transitional structures. The well-balanced UWB performance of the ring coupler, aside from the optimized diode matching, results in improved conversion loss and inter-port isolations for a wide bandwidth. The size of the implemented single-balanced diode mixer is reduced to about 60% of the area of the conventional single-balanced ring diode mixer. The measured results of the proposed mixer exhibit an average conversion loss of 7.5 dB (minimum 6.7 dB) and a port-to-port isolation of greater than 18 dB over a UWB frequency range of 3.1-10.6 GHz. The measured results agree well with the simulated results.

• International Journal of Advanced Culture Technology
• /
• 제7권1호
• /
• pp.225-230
• /
• 2019

In order to improve performance for the size of the rat-race ring coupler, the CCL is used for the realization as the delay line. As realizing lower coupling coefficient, the ratio of the size-reduction for the CCL is enhanced. The CCL is alternated with ${\lambda}_g/4$ of the rat-race ring, and optimized two CCLs are inserted for the size-reduction. the coupling coefficient is 0.2, and electrical lengths of each CCL are $28.2^{\circ}$ and $21.7^{\circ}$. Designed rat-race ring using the CCL has the size of $18.76{\times}20.45mm^2$ and the size-reduction ratio of fabricated rat-race ring using the CCL has 76.8%. Also, fabricated rat-race ring is measured the insertion loss of 3.20dB at the center frequency of 2.45GHz and the 20dB bandwidth is 24.04%. Differenced magnitude and phase between threw port and coupled port are measured 0.1dB and $177.4^{\circ}$, respectively. These performances are almost same compared with the conventional rat-race ring. Suggested application of the CCL can be used various devices and circuits for the size-reduction.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제26권8호
• /
• pp.1188-1195
• /
• 2022

The 6-port phase correlator consists of one in-phase power divider and three 3-dB 90-degree phase difference power dividers, and is mainly used in a demodulation circuit that determines the phase of an input signal. This paper proposes the wideband 6-port phase correlator that consists of an in-phase power divider using a wideband 2:1 impedance transformer with three 37.5-Ω coaxial cables, and a 3-dB 90-degree phase difference power divide using Wireline. The proposed wideband phase correlator fabricated at a center frequency of 1000MHz has the value of the input reflection coefficient(S₁₁ and S₂₂) -14dB or less in the frequency range of 640~1270MHz. Also, the signal transmission characteristic(S_i1), from the in-phase power divider input port to four output ports, has the amplitude of -6.5±0.6dB and the phase error of within ±3.4°, and the signal transmission characteristic(S_i2), from the 90 degree phase difference power divider input port to four output ports, has the amplitude of -6.1±0.6dB and the phase error of within ±6.2°.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• 제35D권7호
• /
• pp.25-31
• /
• 1998

Modal transmission-line is utilized to analyze the power coupling of optical directional coupler composed by two parallel guiding slabs. By defining a coupling efficiency .eta. amenable to rigorous supermodes and boundary conditions of modal functions, we evaluate the power transfer for TE mode of gainy coupler. The results reveal that optimized power exchange occurs at a novel wavelength .lambda.$_{op}$ , which is generally different from minimum gap .lambda.$_{min}$ between rigorous modes and phase-matching condition .lambda.$_{ph}$ .

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제4권2호
• /
• pp.67-72
• /
• 2005

This work proposes a novel coupled line coupler structure based on the asymmetric cascaded connection of coupled lines. The proposed structure can be designed in smaller size than conventional single section coupled line couplers. Also, the additional design freedom offered by the proposed structure can serve many useful purposes such as the output phase control or the flexible coupler layout for complex circuit routing environments.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• 제55권4호
• /
• pp.172-177
• /
• 2006

During normal machine operation, partial discharge(PD) tests were performed with partial discharge analyzer(PDA) in two hydrogenerators. Six cable couplers were installed in circuit ring bus and endwinding of three phases. PDA showed that the normalized quantity number(NQN) and the partial discharge magnitude$(Q_m)$ were very low in hydrogenerator #1 and #2, respectively. The trend analyses of NQN and $Q_m$ value are available for monitoring of the insulation condition in hydrogenerator stator windings. The insulation condition of stator winding can be assessed. Discharge at conductor surface was discovered in B phase(C2 coupler) of hydrogenerator #1. Internal discharges were generated in A and C phases(C2 coupler) of hydrogenerator #1 and in A, Band C phases(C1 and C2 couplers) of hydrogenerator #2. Slot discharges occurred in A, Band C phases(C1 coupler) of hydrogenerator #1. The stator windings of two hydrogenerators were in good condition.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• 제36D권9호
• /
• pp.1-5
• /
• 1999

In this paper, we proposed a novel branch-line coupler using filp-chip technology. The proposed coupler consists of CPW and inverted microstrip. The CPW is on the GaAs flip-chip substrate, and the inverted microstrip is on the alumina main substrate. The ground plane of the CPW is used as a ground plane of the inverted microstrip. And both the transmission lines are connected by solder bump with each other. The characteristics of thisstructure was calculated by FDTD method. The S21, S31 are -3dB and the phase difference is $90^{\circ}$. The calculated characteristics are the same as those of the regular branch-line coupler. This structure can be applied for various kinds of devices using flipchip technology.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• 제63권3호
• /
• pp.200-205
• /
• 2014

In this paper, 5.8GHz band $4{\times}4$ Butler matrix is designed using easily accessible commercial $90^{\circ}$ hybrid coupler and semirigid coaxial cable as a transmission line. This Butler matrix is very flexible to changes of antenna system specification like a frequency band because $90^{\circ}$ hybrid coupler changing is all to do. The result of design is the distance of $2{\times}2$ array antenna element is $\sqrt{2}{\lambda}/4$, the 4 beam directions are diagonal of array antenna and phase shifter is not necessary. The beam width is roughly $25^{\circ}$ narrower because of array antenna geometry and the side lobe is about 10dB higher partially than theoretical beam pattern. But the overall beam pattern is similar with theoretical beam. This Butler matrix can be applied to switching beam antenna of 5.8GHz band Wi-Fi and WAVE system.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• 제35D권6호
• /
• pp.1-7
• /
• 1998

In this paper, SMD type backward wave 3dB coupler for PCS basestation application was designed, fabricated and measured. We designed that it could be replaced for commercial basestation system and it was 0.56 $\times$ 0.35 inches size. The test results show that coupler is well operated within frequency range of 1.75 ~ 1.98GHz, which is defined on PCS system. The coupler reveals insertion loss 0.295dB, isolation -30.31dB, amplitude balance 0.05dB, phase balance 0.02$^{\circ}$, input and output impedance matching -30.38dB, -39.72dB, respectively.