• 전자공학회논문지
• /
• 제50권8호
• /
• pp.253-263
• /
• 2013

광학측정기법 중 주파수 스캐닝 간섭계는 기존 3차원 측정기법과 비교하여 광학 하드웨어 구조가 측정과정동안 고정되어 있어, 대물렌즈나 대상물체의 수직 스캐닝 없이 단지 광원의 주파수만 특정한 주파수 밴드내에서 스캐닝 하여 대상물체에 주사되므로, 우수한 광학 측정 성능을 보인다. 광원의 주파수를 변경하여 간섭계를 통해 간섭 영상을 획득한 후, 밝기 영상 데이터를 주파수 영역 데이터로 변환하고, 고속 푸리에 변환을 통한 주파수 분석을 이용하여 대상 물체의 높이 정보를 계측한다. 하지만, 대상물체의 광학적 특성에 기인한 광학노이즈와 주파수 스캐닝동안 획득되는 영상의 수에 따라 증가하는 영상처리시간은 여전히 주파수 스캐닝 간섭계의 문제이다. 이를 위해, 1) 편광기반 주파수 스캐닝 간섭계가 광학 노이즈에 대한 강인성을 확보하기 위해 제안되어진다. 시스템은 주파수 변조 레이저, 참조 거울 앞단의 ${\lambda}/4$ 판, 대상 물체 앞단의 ${\lambda}/4$ 판, 편광 광분배기, 이미지 센서 앞단의 편광기, 광섬유 광원 앞단의 편광기, 편광 광분배기와 광원의 편광기 사이에 위치하는 ${\lambda}/2$ 판으로 구성된다. 제안된 시스템을 이용하여, 편광을 기반으로한 간섭이미지의 대조대비를 조절할 수 있다. 2) 신호처리 고속화 방법이 간섭계 시스템을 위해 제안되며, 이는 그래픽 처리 유닛(GPU)과 같은 병렬처리 하드웨어와 계산 통합 기기 구조(CUDA)와 같은 프로그래밍 언어로 구현된다. 제안된 방법을 통해 신호처리 시간은 실시간 처리가 가능한 작업시간을 얻을 수 있었다. 최종적으로 다양한 실험을 통해 제안된 시스템을 정확도와 신호처리 시간의 관점으로 평가하였고, 실험결과를 통해 제안한 시스템이 광학측정기법의 실적용을 위해 효율적임을 보였다.

• 한국미생물·생명공학회지
• /
• 제48권3호
• /
• pp.344-357
• /
• 2020

Streptococcus zooepidemicus 유래의 세포외 고분자물질인 히알루론산(hyaluronic acid) (HA)을 대량 생산하기 위해, 균주 개량, 생산배지 및 배양공정 개발에 관한 연구를 수행하였다. HA 고생산성 변이주를 선별하기 위해 약 99%의 사멸률을 보이는 ethylmethane sulfonate (EMS) 처리조건을 적용해서, 지속적인 random screening 방법으로 고생산성, 고안정성의 변이주들을 선별할 수 있었다. HA를 고농도로 생산하기 위해서는, 이 균주의 생화학 및 배양생리적 특성에 기반한 최적 배지개발이 필수적이라고 판단하여, one-factor-at-a-time (OFAT), full factorial design (FFD), steepest ascent method (SAM) 및 response surface method (RSM) (반응표면분석법)을 순차적으로 적용하여 통계적 배지 최적화 실험을 수행하였다. 최적 배지조성에서 플라스크 배양에 의한 HA 생산성은 5.38 g/l로서, 이전 배지(3.54 g/l)에 비해 약 52% 향상된 생산량을 얻을 수 있었다. 또한 선별된 우량균주와 최적화된 생산배지를 이용하여 5 L 발효조에서 배양공정 최적화 연구를 수행하였다. 이 균주의 생리학적 특성을 고려할 때, HA 생산성을 높이기 위해서는 (배양 중 HA 축적으로 인해 고점도를 띠는) 배양액으로의 충분한 용존산소 공급이 매우 중요한 요인인 것으로 판단되었다. 따라서 용존산소 공급과 밀접하게 관련있는 발효조의 교반시스템(교반 날개 종류, 크기 및 배치 등) 및 교반속도에 대한 최적화 연구를 수행하였다. 그 결과, 교반축 하부에는 Rushton turbine-type, 상부에는 marine-type의 확장된 교반날개(기존 대비 직경 1.3배 확장)가 설치된 경우, 450 rpm에서 강화된 혼합력과 충분한 용존산소 공급으로 인해 HA 생산성이 기존 플라스크 배양 대비 약 1.8배(9.79 vs. 5.38 g/l) 더 높은 것으로 확인되었다. 최종적으로 HA 배양공정의 scale-up 가능성을 확인하기 위해, pilot 규모의 50 L 발효조 배양을 최대 300 rpm의 교반속도에서 수행하였다. 처음으로 시도한 50 L 배양임에도 불구하고, HA 최대 생산성 면에서 볼 때, 5 L 발효조 결과와 거의 동일한 수준(98.5%) (9.11 vs 9.25 g/l)의 생산량을 얻을 수 있었다. 반면 지수기 성장단계인 배양 15시간까지의 50 L 배양의 HA 평균생산속도(r_p)는 0.46 g/l/hr로서 0.62 g/l/hr인 5 L 배양 대비 약 74% 정도에 머무는 것으로 나타났다. 따라서 생산 발효조의 scale-up 시, 생산균주의 전단응력 민감성(shear damage)을 함께 고려하면서, 산소전달계수(k_La)를 기반으로 하는 교반시스템에 대한 체계적인 연구가 진행된다면, HA 생산속도도 증가될 수 있는 긍정적인 결과를 얻을 수 있을 것으로 기대된다.

• 한국식품위생안전성학회지
• /
• 제19권1호
• /
• pp.12-18
• /
• 2004

1. 닭고기에서 4종의 플루오로퀴놀론계 합성항균제(ofloxacin, norfloxacin, ciprofloxacin, enrofloxacin)를 액상추출법으로 추출하여 형광검출기와 HPLC를 이용하여 동시 정량 분석하는 방법을 확립하였으며 분석조건으로서 컬럼은 Symmetry Cl8(250${\times}$4.6 mm id, 5 $\mu\textrm{m}$), 이동상은 0.4% triethylamine 및 0.4% phospholic acid 수용액, methanol 및 acetonitrile 혼합용액(800: 100: 100, v/v/v)을 사용하였으며, 형광검출기는 여기파장 278 nm, 측정파장 456 nm으로 그리고 유속은 1.0 $m\ell$/min., 주입량은 50 ${\mu}\ell$로 하였다. 확립된 분석조건으로 측정한 ofloxacin, norfloxacin, ciprofloxacin, enrofloxacin 표준품의 표준곡선식에서 모두 상관계수 0.999이상의 양호한 직선성을 보였으며, 첨가한 닭고기의 크로마토그람에서도 각각의 물질별 분리시간대에 방해 피크 없이 양호한 분리도를 나타내었다. 0.05∼0.2 $\mu\textrm{g}$/g 첨가한 시료에서 평균 회수율은 ofloxacin 92.0∼95.4%, norflokacin 84.2∼87.3%, ciprofloxacin 78.3∼82.2%, enrofloxacin 91.3∼95.3%이었으며 변이계수(CV)는 2.7∼9.4%이었다. 4종의 동시분석법의 검출한계 및 정량한계는 각각 ofloxacin 23.5 ppb, 35.3 ppb, norfloxacin 3.4 ppb, 5.1 ppb, ciprofloxacin 3.0 ppb, 4.5 ppb, enrofloxacin 2.5 ppb, 3.8 ppb수준이었다. 2. 인천 지역에서 도축한 닭고기 총 1,523수를 EEC-4-plate법으로 검사한 결과 양성반응을 보인 닭고기는 15수(육계 10, 토종닭 5)였으며, HPLC를 이용한 정밀검사결과 육계 5수에서 ciprofloxacin이 불검출 ∼0.04 ppm, enrofloxacin이 0.01∼0.69 ppm수준으로 검출되었으며, 토종닭 5수에서는 ciprofloxacin이 0.02∼0.12 ppm, enrofloxacin이 0.36∼6.79 ppm수준으로 검출되었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 한국환경농학회지
• /
• 제29권1호
• /
• pp.54-60
• /
• 2010

가축분뇨 돈분액비를 벼 재배에 이용하는 방안을 모색하기 위하여 돈분 액비에 대하여 발효단계별로 완숙된 액비를 이용하여 벼 재배 시험을 2007년과 2008년에 전라북도농업기술원 시험답(전북통)에서 실시하였다. 돈분액비는 계단식 발효조내에서 약 6개월 정도 발효시키면서 일반성분과 중금속함량의 변화를 조사하였고, 벼 재배시험은 남평벼를 육묘하여 5월 22일에 재식거리 $30{\times}14cm$로 기계 이앙하였다. 분시비율은 기비 70%, 수비 30%로 하여 화학비료와 비교시험 하였다. 돈분액비의 부숙단계별 성분함량 변화를 보면 총질소는 0.549%~0.122%로 부숙이 진행될수록 낮아졌으며, 인산 나트륨 및 중긍속 함량도 발효가 진행될 수록 낮아졌다. 농가에서 일반적으로 사용되고 있는 돈분액비 233종을 채취하여 조사한 결과 질소농도는 0.558%이고， C/N율은 3.116을 나타냈다. 질소농도의 최저값은 0.13%, 최고값은 0.99%로 큰 차이를 나타냈다. 벼의 질소흡수량은 액비와 화학비료 시용에 따른 생육시가별 벼의 질소흡수량 변화는 액비시용은 최고분얼기에 20.3, 화학비료시용구는 22.2로 화학비료구에서 액비시용구보다 높은 흡수량을 나타냈다. 출수기의 질소농도는 화학비료 처리구에서 1.5% 돈분액비 처리구에서 1.8%를 보여 차이가 크지 않았다. 수확기에 조사한 간장은 돈분액비 처리구에서 73.8 cm로 화학비료 처리구에 비해 4.2 cm 짧았으며, 수장은 차이가 없었다. 수량은 돈분액비 처리구에서 507 kg/10a으로 화학비료 처리구에 비해 1.2% 낮은 수준을 보였다. 화학비료 처리구에서는 단백질 함량이 6.3%였으나, 돈분액비 시용구에서는 6.4% 로써 처리구 간에 차이를 나타내지 않았다. 그러나 도복벼에서는 6.8%로 화학비료 처리구와 돈분액비 처리구중의 정상 벼보다 높게 나타냈다. 현미품위 중 완전미율은 화학비료 처리구에 비해서 돈분액비 처리구에서 낮은 경향이었으며, 백미품위, 식미값도 유사한 경향이었다. 이상의 결과에 의하면 돈분액비 시용은 숙성된 액비를 균일 살포 할 경우 관행적인 화학비료 시용에 상응하는 효과가 있다고 생각된다.

• Clinical and Experimental Pediatrics
• /
• 제46권12호
• /
• pp.1186-1193
• /
• 2003

목 적 : 염색체 취약부위는 세포를 특정의 화학물질에 노출시키거나 특수한 배양조건에서 배양 할 때 쉽게 파열되는 염색체상의 특정구역이다. 취약부위는 유전성질환 및 악성종양과 관련이 있으며, 현재에는 분자생물학적 실험기법의 개발로 분자수준에서 이해가 되고 있다. 새로운 취약부위 및 취약부위의 발현을 높이거나 쉽게 관찰할 수 있는 실험실적 조건을 알아보기 위하여 항암제로 사용되는 Ara-C를 이용하여 염색체파열을 조사하여 보았다. 한편 염색체 취약부위가 종양형성과 관련이 있다는 사실에 기초하여 Ara-C에 의해 발열되는 취약부위와 암유전자가 위치하는 부위 및 종양에서 일정하게 염색체변이가 관찰되는 특정의 염색체 부위와의 상관관계도 알아보고자 하였다. 방 법 : 정상 성인 남녀 각각 3명의 말초혈액 내 T-림프구를 세포배양 후 Ara-C를 첨가하고 다시 caffeine을 처리한 뒤 종전에 시행했던 방법과 동일하게 검체 처리하여 염색체파열 부위를 관찰하였다. 염색체 취약부위는 염색체상의 일정부위에서 100개의 염색체파열 당 2회 이상의 염색체파열이 6명 중 4명 이상에서 관찰되는 경우로 정의하였다. 결 과 : 1) T-림프구를 엽산이 부족한 MEN-FA 배지에서 배양 시 Ara-C는 100개의 분열세포 당 252.1개의 염색체파열을 유도하였으며, Ara-C를 처리하지 않은 대조군에서 25.2개가 관찰되어 Ara-C를 처리한 경우에 염색체파열이 의미 있게 많았다(P<0.05). 2) Ara-C에 의한 염색체파열은 엽산이 부족한 MEM-FA 배지에서 엽산이 충분한 RPMI 1640 배지에서 보다 많이 되었다(P<0.05). 한편, 2.0 mM 농도의 caffeine은 엽산만 부족한 배양 배지에서는 염색체파열을 상승시키지 못했으나, Ara-C와 병행사용 시 상승시켰다. 3) Ara-C에 의해 가장 많이 파열된 부위는 3p14.2.이었으며, 발현된 취약부위는 20부위였다. 4) 발현된 취약부위 중 7 부위는 JUN, SKI, REL, N-MYC, FHIT, MET, ETS-1, FOS의 암유전자가 위치하는 부위와 일치하였으며, 15부위는 급성림프구성백혈병, 급성골수성백혈병, 만성림프구성백혈병, 골수이형성성증, 악성흑색종, 신경모세포종, 소세포성폐암, 난소암, 유전성 신장암, 혼합성 지방육종시 염색체상에 이상이 있는 부위와 일치하였다. 결 론 : S기 특이성 항암제인 Ara-C는 정상성인의 T-림프구를 엽산이 부족한 MEM-FA배지에서 배양시 염색체 파열을 대조군에 비해 의미 있게 유도하였다. 한편으로 Ara-C 특이성 염색체 취약부위는 암유전자가 위치하는 부위 및 특정 종양에서 관찰되는 특이한 염색체변이가 있는 부위와 상당 예에서 일치하여 아직 알려지지 않은 암유전자를 찾거나 분석하는데 기초적인 자료를 제공할 뿐 아니라 염색체변화와 종양형성과정의 상관관계를 이해하는데 도움이 될 것으로 사료된다.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• 제9권1호
• /
• pp.13-25
• /
• 1998

본 논문에서는 부모학대의 주이유가 무엇보다도 가족내 역동과 정신병리에 있다고 생각되어, 부모학대를 주소로 입원한 청소년들을 대상으로 임상적인 소견과 병력을 심도 있게 알아보고, 그 저변에 있는 정신병리와 가족역동, 특히 모자관계를 중심으로 알아보았다. 국립서울정신병원내의 1987년부터 1997년까지 입원한 환자중 부모에게 신체 공격 또는 신체적 위해를 가하겠다는 언어적, 비언어적인 위협을 가한 환자중 정신증, 기질적인 뇌질환, 자폐아, 정신지체아동을 제외한 21명 환자의 면담과 병록지 검토를 통하여 대상 청소년들에 대한 고찰을 하였다. 부모학대로 입원한 21명의 환자중 남자 14명, 여자 7명으로 진단은 품행장애, 경계선 인격장애가 가장 많았으며, 평균 연령은 10대 중반이었다. 가족역동과 발달병리상 4개의 소집단으로 나눌 수 있었다. 1) 어머니와의 공생적인 관계군；(1) 어머니와 공생적인 관계에서 분리되지 않은 상태로 청소년 시기를 맞이하였고, 아버지의 정서적. 실제적 부재상태에서 어머니의 가정내 유일한 남자인 환자에 대한 과도한 밀착이 두드러졌다. 제2차 분리개별화시기인 청소년을 맞이하여 어머니와의 갈등적 관계에서 오는 내적 긴장감과 분노를 표현함과 동시에 나름대로 분리를 획득하고자하는 시도로서 어머니를 향한 신체적 공격을 이해할 수 있겠다. (2) 이 환자들은 탄생 이후부터 중한 질환과 발육부진으로 부모의 과잉보호로 공생적 관계에 머물며 유아적인 전지전능감, 힘에 대한 환상의 비현실적인 감각을 제대로 처리하지 못하고 현실적응을 못하고 부모에게 과도하게 의존하고, 자신의 요구가 충족되지 않으면 쉽게 과격행동으로 표출하였다. 2) 경계선 인격장애군：이들은 양육상의 적절한 모성의 결핍과 부모자체의 성격상의 문제와 미숙함으로 의존성이 조장되고 분리가 방해받아 발달상 재접근시기에 머물고 있었다. 제2차 분리개별화시기인 청소년기를 맞이하여 의존과 독립에 관한 그들의 위기 갈등이 되살아나고, 이 갈등의 표현으로 부모학대가 일어났다. 3) 품행장애군：이들은 부모와 기본적인 애착관계를 형성하지 못하였고, 부모의 존재는 이들에게 단지 자신의 필요 충족의 대상이었다. 환자 자신의 전지전능한 요구가 충족되지 못하고 갈등 상황에 빠졌을 때 공격성과 충동 조절 능력의 결여 상태에서 부모를 향한 폭력을 행사하게 된 것으로 이해된다.

• 한국식품과학회지
• /
• 제50권2호
• /
• pp.152-164
• /
• 2018

본 연구는 고단백질 식품원료인 식용곤충(Tenebrio molitor larva, Gryllus bimaculatus, Bombyx mori pupa)을 이용하여 대두 된장 가공방식을 접목시킨 페이스트형 발효조미료를 제조하였다. 이들 페이스트형 발효조미료의 휘발성 향기화합물들이 파악하기 위해 HS-SPME법에 의해 휘발성 화합물들을 추출한 후 성분들의 정성분석 및 특성을 확인하였다. 식용곤충 3종과 대두를 발효시킨 대두 된장(SBP)까지 총 4 종의 페이스트형 발효조미료 시료에서 정성된 휘발성 화합물은 총 121종이었으며 에스터류 11종, 알코올류 18종, 알데하이드류 23종, 산 5종, 피라진류 10종, 피리딘류 2종, 방향족 탄화수소류 7종, 케톤류 10종, 알케인류 19종, 아마이드류 9종, 퓨란류 4종 그리고 그 밖의 화합물 3종으로 검출되었다. 각 시료에 따른 휘발성 화합물의 경우 쌍별 귀뚜라미 페이스트형 발효조미료(GBP)의 경우 54종의 화합물, 번데기 페이스트형 발효조미료(SPP)의 경우 36종의 화합물, 갈색거저리 유충 페이스트형 발효조미료(TMP)의 경우 48종의 화합물이 검출 되었고, 대두 된장의 경우 총 55종의 화합물이 분석되었다. 또한 대두 된장과 식용곤충 페이스트형 발효조미료의 휘발성 향기성분의 차이와 소비자의 관능적 향의 선호성에 관한 연관성을 확인하기 위하여 부분 최소제곱 회귀분석(PLSR)을 실시하였다. SBP 시료의 경우 벤즈알데하이드, 헥산알, 노말펜탄알 등 알데하이드 화합물 계열이 향미 선호도에 긍정적인 역할을 하여 관능적 향미가 우수한 것으로 나타났으며, SPP 시료 역시 관능적 향미 선호도가 긍정적으로 나타났는데, 이 경우는 피라진 계열의 상관성이 높게 분석되었다. 반면 GBP의 경우 관능적 향미 선호도가 가장 낮았다. 이는 노말뷰틸아민, 다이메틸아세트알데하이드 등 암모니아 냄새를 내는 물질인 아마이드 계열의 관련성이 높게 확인되었고, TMP의 경우에도 이차뷰틸아민과 같은 암모니아 냄새가 나는 물질과 다른 시료와 다르게 일반적으로 생선과 같은 안좋은 불쾌한 향을 내는 물질로 알려져 있는 피리딘 계열이 존재하여 관능적 향미선호도가 부정적으로 나타났다. 본 연구에서 2,6-다이메틸피라진(py3), 트라이메틸피라진(py5)의 경우 전체적으로 모든 시료에서 높은 비중으로 분석이 되었고, 테트라메틸피라진(py8)의 경우 SPP와 SBP, TMP의 시료에서 가장 높은 비중을 차지하는 향기성분 중 하나로 확인이 되었는데, 이는 전통된장의 주요 향기성분으로 알려져 있어 식용곤충 페이스트 발효조미료의 경우 전통된장과 비슷한 향미 특성을 갖는 것으로 파악되었다. 이를 통해 장류 미생물을 이용하여 식용곤충을 된장 제조방식의 페이스트형 발효조미료를 제조할 경우 대두 된장 특유의 향미를 포함할 수 있지만, 원재료의 차이로 인해 각 시료간의 향미 특성 차이가 분명히 나타나는 것을 확인하였다. 또한, 각 시료의 전체적인 관능 선호도 특성에 향기성분의 상관성이 있는 것을 확인할 수 있었다. 이는 장류 미생물을 통해 다양한 휘발성 향미물질을 포함하는 식용곤충 페이스트형 발효조미료 제조 가능성을 확인 할 수 있었으며 원료와 제조법의 조합을 통해 더 많은 응용이 가능할 수 있을 것이다.

• 한국환경농학회지
• /
• 제36권1호
• /
• pp.57-62
• /
• 2017

본 연구는 딸기 중 bistrifluron 및 chlorantraniliprole을 예산군 포장(포장 1), 논산시 포장(포장 2)에 살포한 후, 약제처리 2시간 후를 0일차로 하여 0, 1, 2, 3, 5, 7, 10일에 시료를 채취하였다. 두 시험농약을 LC-MS/MS를 이용하여 분석 한 후 생물학적 반감기를 산출하고 생산단계 농약 잔류허용기준을 설정하였다. 정량한계는 모두 0.005 mg/kg이었으며, 회수율 분석 결과 bistrifluron의 경우 82.8~103.9%, chlorantraniliprole에서는 82.7~100.2%의 회수율을 보였으며, 10% 미만의 변이계수(Coefficient of variation, C.V.) 값을 만족하였다. 딸기 중 bistrifluron 및 chlorantraniliprole의 초기 잔류량은 포장 1에서 0.16 mg/kg, 0.17 mg/kg이었고, 포장 2에서는 0.15 mg/kg, 0.17 mg/kg으로 MRL(bistrifluron: 0.5 mg/kg, chlorantraniliprole: 1.0 mg/kg)보다 낮은 수준을 보였다. 10일 후 잔류량은 포장 1에서 0.05 mg/kg, 0.04 mg/kg, 포장 2에서는 0.05 mg/kg, 0.06 mg/kg이었으며, 초기농도 대비 66.67%, 76.49% 감소하는 것을 보였다. 잔류량에 따른 잔류감소 회귀식을 산출한 결과 딸기 중 두 약제에 대한 반감기는 bistrifluron에서는 두 포장 모두 6.3일, chlorantraniliprole은 4.7일(포장 1)과 6.4일(포장 2)로 나타났다. 잔류감소 회귀식을 이용하여 산출한 생산단계 잔류허용기준은 bistrifluron과 chlorantraniliprole의 수확 10일전 1.10 mg/kg, 2.29 mg/kg으로 제안하였다.