• Journal of Korean Medical classics
• /
• v.13 no.2 s.17
• /
• pp.155-155
• /
• 2000

Body fluid(津液) is a general term for normal mucus in human body, including saliva, gastric juice, intestinal juice and articular fluid in joints as well as tear, running nose, sweat, etc.. The formation of Body fluid goes through two phases. First phase is digestion of food at stomach, and then evaporation and classification of energy at Triple warmer(三焦). More technically speaking, Body fluid is divided into the Jin(津) & the Aek(液). Aek is a very mild and water-like fluid, runs deep into the internal organs. Jin is a thick and sticky liquid, running shallow under the skin or in the joints of limbs. Major roles of body fluid over the body are to moisturize the internal organs, flesh, skin, etc., to soften the joints, to fill the bone marrow, and to balance Yin and Yang. This article deals with the role of body fluid and how to differentiate them, the liquid metabolism in the human body, and the formation and change of sweat, urine, tear, spit, bone marrow, etc.. The imbalance of Yin and Yang and disturbance of Triple warmer's evaporation lead into lumbago, leg weakness and edema is also explained here.

• Journal of Korean Medical classics
• /
• v.13 no.2 s.17
• /
• pp.156-171
• /
• 2000

Body fluid(津液) is a general term for normal mucus in human body, including saliva, gastric juice, intestinal juice and articular fluid in joints as well as tear, running nose, sweat, etc.. The formation of Body fluid goes through two phases. First phase is digestion of food at stomach, and then evaporation and classification of energy at Triple warmer(三焦). More technically speaking, Body fluid is divided into the Jin(津) & the Aek(液). Aek is a very mild and water-like fluid, runs deep into the internal organs. Jin is a thick and sticky liquid, running shallow under the skin or in the joints of limbs. Major roles of body fluid over the body are to moisturize the internal organs, flesh, skin, etc., to soften the joints, to fill the bone marrow, and to balance Yin and Yang. This article deals with the role of body fluid and how to differentiate them, the liquid metabolism in the human body, and the formation and change of sweat, urine, tear, spit, bone marrow, etc.. The imbalance of Yin and Yang and disturbance of Triple warmer's evaporation lead into lumbago, leg weakness and edema is also explained here.

• Journal of Power Electronics
• /
• v.12 no.4
• /
• pp.567-577
• /
• 2012

This paper introduces a new scheme to balance the DC bus voltages of a cascaded H-bridge converter which is used as a Distribution Static Synchronous Series Compensator (D-SSSC) in electrical distribution network. The aim of D-SSSC is to control the power flow between two feeders from different substations. As a result of different cell losses and capacitors tolerance the cells DC bus voltage can deviate from their reference values. In the proposed scheme, by individually modifying the reference PWM signal for each cell, an effective balancing procedure is derived. The new balancing procedure needs only the line current sign and is independent of the main control strategy, which controls the total DC bus voltages of cascaded H-bridge. The effect of modulation index variation on the capacitor voltage is analytically derived for the proposed strategy. The proposed method takes advantages of phase shift carrier based modulation and can be applied for a cascaded H-bridge with any number of cells. Also the system is immune to loss of one cell and the presented procedure can keep balancing between the remaining cells. Simulation studies and experimental results validate the effectiveness of the proposed method in the balancing of DC bus voltages.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1109-1118
• /
• 2014

A Fundamental Frequency Sorting Algorithm (FFSA) is proposed in this paper to balance the voltages of floating dc capacitors for Modular Multilevel Converters (MMCs). The main idea is to change the sequences of the CPS-PWM carriers according to the capacitor voltage increments during the previous fundamental period. Excessive frequent sorting is avoided and many calculating resources are saved for the controller. As a result, more sub-modules can be dealt with. Furthermore, it does not need to measure the arm currents. Therefore, the communication between the controllers can be simplified and the number of current sensors can be reduced. Moreover, the proposed balancing method guarantees that all of the switching frequencies of the sub-modules are equal to each other. This is quite beneficial for the thermal design of the sub-modules and the lifetime of the power switches. Simulation and experimental results acquired from a 9-level prototype verify the viability of the proposed balancing method.

• Journal of Welding and Joining
• /
• v.33 no.3
• /
• pp.68-74
• /
• 2015

Superduplex stainless steels are important materials to the oil and gas industry, especially for off-shore production. TIG welding of super duplex stainless steels to obtain the optimal phase balance between austenite and ferrite is mainly achieved by controlling the cooling rate and the weld chemistry. The latter depends on the filler wire chosen and the shielding gas used. If TIG welding of superduplex stainless steels is performed with argon shielding gas only, then nitrogen gets lost from the weld pool, which can result in a ferrite-rich weld metal, with an inferior corrosion resistance than parent metal. In the present study, nitrogen permeation model from the shield gas which gets into the weld metal in DCEN-TIG welding has suggested. This plasma stream model shows characteristics of permeation of nitrogen ions into the molten metal due to the strong physical effect of plasma stream which formed by the arc pressure rather than the permeation of nitrogen ions caused by electric effect.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.6
• /
• pp.434-440
• /
• 2007

One of the cold start problems of a FCV is the freezing of the water in the water tank when a FCV is not in operation and the surrounding temperature drops below $0^{\circ}C$. The ice in the tank should be melted as quickly as possible for a satisfactory operation of fuel cell vehicles. In this study, the melting process for the constant heat fluxes of the plate heaters was numerically calculated in the 2-D model of the tank and plate heaters. The enthalpy method and FVM code was used for this analysis. The changes of the temperature with heat fluxes and the heat transfer area could be investigated. The energy balance error was found to increase with the heat flux. From this numerical analysis, the proper heat flux value and some important design factors relating local overheating and pressurization of the water tank could be examined.

• Journal of Agricultural Extension & Community Development
• /
• v.11 no.1
• /
• pp.175-189
• /
• 2004

There are many assertions related to biotechnology and genetically modified organisms(GMOs). Some experts have asserted that GM foods could be dangerous and that there is no reliable evidence that have been demonstrated safe through appropriate tests, and the others asserted these foods are as safe and nutritions as their conventional counterparts. The objectives of this study was to study an societal implications of biotechnology and GMOs in agriculture. To keep the balance in mind the researcher examined not only usefulness but also harmfulness of GMOs, along with the developmental process of biotechnology industry. It was observed that basically, multinational corporations developed GMOs to maximize their profit, and strengthened their control on agriculture and food through GMOs, as observed in alliance among big multinational corporations' food chain cluster and systems. Under the situation, farmers were losing their status as independent producer and were becoming propertied labor for multinational corporation through contract farming. If these trends continuous in the future, multinational corporations will have the control of genetic resources, these may bring about reduction of bio-diversity, thus may lead the opposite direction to eco-friendly agriculture. If multinational corporations' tendency to suppress the latent harmfulness for the profit continuous further, this may lead the degradation phase of farming and agriculture, thus leading negative socio-economic effects as well as culture and religion.

• Journal of the Korean Society for Heat Treatment
• /
• v.11 no.3
• /
• pp.216-226
• /
• 1998

Heat treatment conditions and the formation of microstructures were studied for improving the transformation-induced plasticity(TRIP) effect of retained austenite and mechanical properties of Fe-0.2%C-1.5%Si-1.5%Mn sheet steel. An excellent combination of elongation about 30% and high strength over 760MPa was achieved by processing of intercritical annealing and isothermal holding Intercritical annealing the sheet steel produced fine particles($1{\sim}2{\mu}m$) of retained austenite which were stabilized due to C enrichment by subsequent holding in bainite transformation range. Heat treatment conditions were depended on the shape and distribution of second phases as well as the volume fraction and stability of retained austenrte. In this work, the heat treatment condition of optimal strength-elongation balance was obtained by holding the steel at $400^{\circ}C$ for 200sec, after intercritical annealing at $790^{\circ}C$ for 300sec.

• Journal of Energy Engineering
• /
• v.14 no.1
• /
• pp.11-17
• /
• 2005

The purpose of this research is to develop the model of pressure drop per unit pipe length due to the turbulence modulations in particle-laden flows which can be applied to various fluid conditions. The wake behind a particle, particle size, loading ratio and density difference between two phases of particle-laden flow was considered. The frictional pressure drop was modeled with the force balance in control volume. The numerical results show good agreements with available experimental data and the model success-fully predicted the mechanism of the pressure drop in particle-laden flows.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.3
• /
• pp.261-266
• /
• 2010

Human body is hard to be in perfect balance during walking. Most of time the trunk is supported by one leg and the center of mass(COM) falls to the contralateral side. Thus, dynamic variables such as the velocity of the COM should be considered when gait stability is evaluated. The purpose of this study was to investigate whether the extrapolated center of mass(XCom) which utilized the COM position and its velocity, is appropriate to evaluate gait stability. Ten healthy adults participated in this study and performed 3 different types of gaits(normal(NG), hands on waists(HWG), and hands on shoulders(HSG)) onto 4 different types of obstacle(obstacle height: 0%, 30%, 40% and 50% of leg length). Medio-lateral Com-CoP and XCom-CoP inclination angle were calculated during support phase. For all condition, greater M-L XCoM-CoP inclination angles were found(p<.05) compared with those of matched obstacle height CoM-CoP. Especially, M-L XCoM-CoP inclination angle at 50% height revealed the best condition for monitoring dynamic stability. Significantly increased in M-L XCoM-CoP inclination angle was found(p<.05) as obstacle height increased on NG and HWG.