• 제목/요약/키워드: Phase Balance

검색결과 513건 처리시간 0.028초

선박 평형수 처리용 Phase Shift Full Bridge Converter 출력 제어 알고리즘 (An Output Control Algorithm for Phase Shift Full Bridge Converter for Ballast Water Treatment)

  • 이상리;김학원;조관열;정호철;김종혁;박귀철
    • 전력전자학회논문지
    • /
    • 제18권6호
    • /
    • pp.530-539
    • /
    • 2013
  • In large vessels, proper water level must be maintained with a balance for right and left equilibrium by absorbing or draining sea water in ballast water tank. However, this ship's ballast-water can be drained marine organisms to local sea area by world trade and this can be a source of ecological disturb. In order to solve these problems, marine organisms must be removed in accordance with the international covenant for the emission of microorganisms. By this reason, the seawater electrolysis rectifier of low-voltage high-current rectifiers with excellent ability for microbial treatment is required. In this paper, PSFB converter will be discussed for the seawater electrolysis rectifier. Furthermore, a new output control method with the power limit operation under the limited maximum voltage condition is proposed for this rectifier. The simulation for the proposed current control method for PSFB Converter is shown using MATLAB/SIMULINK. Finally the usefulness of the proposed control method is presented by the experimental results.

유전체 공진기를 이용한 X-band 전압제어 발진기 설계 및 제작 (Design and Fabrication of Voltage Control Oscillator at X-band using Dielectric Resonator)

  • 한석균;최병하
    • 한국항해항만학회지
    • /
    • 제27권5호
    • /
    • pp.513-517
    • /
    • 2003
  • 본 논문에서는 유전체 공진기를 이용하여 X-band에서 안정된 소스원으로 사용할 수 있는 전압제어 발진기를 구현하였다. 위상 잡음을 개선하기 위하여 저잡음 특성을 가진 MESFET과 높은 선택도를 얻기 위하여 유전체 공진기를 사용하였고, 안정된 전압 가변을 하기 위하여 Q값이 높고 가변 특성이 좋은 바렉터 다이오드를 사용하였다. 구현된 회로는 최적의 성능을 갖도록 회로 시뮬레이터인 ADS를 사용하였다. 제작된 전안제어 유전체 공진 발진기의 특성을 측정한 결과, 중심 주파수 12.05 GHz에서 2.22 dBm 출력 파워와 -30 dBc의 고조파 억압과 중심 주파수 100 KHz offest에서 -130 dBc의 위상잡음 특성을 얻을 수 있었으며, 바렉터 다이오드에 인가되는 전압의 변화에 따른 주파수 변화는 중심주파수에서 $\pm$8.7 MHz를 얻었다. 제작된 VCDRO는 X-band에서 국부 발진기로 이용될 수 있음을 확인하였다.

FMCW 레이더용 전압제어 유전체 발진기의 구현 (Implementation of Voltage Control Dielectric Resonator Oscillator for FMCW Radar)

  • 안용복;박창현;김장구;조현식;강상록;한석균;최병하
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2003년도 추계종합학술대회
    • /
    • pp.398-402
    • /
    • 2003
  • 본 논문에서는 FMCW레이더 시스템에서 안정된 소스원으로 사용할 수 있는 전압제어 유전체 공진 발진기를 구현하였다. 위상 잡음을 개선하기 위하여 저잡음 특성을 가진 MESFET과 높은 선택도의 유전체 공진기를 사용하였고, 안정된 전압 가변을 하기 위하여 Q값이 높고 가변 특성이 좋은 바렉터 다이오드를 사용하였다. 구현된 회로는 최적의 성능을 갖도록 하모닉 발란시스 시뮬레이션을 사용하였다. 제작된 전압제어 유전체 공진 발진기의 특성을 측정한 결과, 중심 주파수 12.0GHz에서 2.22dBm 출력 파워와 -30dBc의 고조파 억압과 중심 주파수 100kHz offest에서 -130dBc의 매우 좋은 위상잡음 특성을 얻었으며, 바렉터 다이오드에 인가되는 전압의 변화에 따른 주파수 가변 범위는 중심주파수에서 $\pm$18.7MHz를 얻었다. 제작된 VCDRO는 FMCW의 국부 발진기로 이용될 수 있음을 확인하였다.

  • PDF

게임 메카닉스 시뮬레이션 방법에 관한 조사연구 (A Survey of Game Mechanics Simulation Methods)

  • 장희동
    • 정보처리학회논문지A
    • /
    • 제12A권5호
    • /
    • pp.441-450
    • /
    • 2005
  • 게임시장이 급속히 성장하면서 게임개발의 비용과 기간이 모두 증가하고 있다. 이러한 증가는 게임개발 프로젝트에서 보다 전문적인 관리기법이 요구된다는 것을 의미한다. 게임메카닉스(game mechanics)는 특정 게임플랫폼에서 게임플레이가 실행될 수 있도록 구현된 알고리즘이다. 게임메카닉스는 게임의 공학적 요소들이 집중되어 있어 프로젝트의 설계단계부터 구현단계까지 지속적인 품질관리가 이루어져야 한다. 특히 설계단계에서 게임메카닉스의 품질을 분석할 수 있는 유용한 방법이 바로 시뮬레이션이다 게임메카닉스 시뮬레이션 방법들이 여러 가지가 존재하지만 각 방법은 그 특징들로 인해서 사용범위가 제한된다. 본 논문에서는 게임메카닉스 시뮬레이션 방법들을 조사하여 그 특징에 대하여 비교 분석하였다. 분석한 결과, 페트리네트 모델 시뮬레이션 방법이 게임메카닉스의 무결성, 최적화, 그리고 밸런스의 품질분석을 총체적으로 할 수 있음을 알 수 있었다.

이상 유동 수치해석을 이용한 기포 구동 생물 반응기 내부 최적 구조에 관한 연구 (Study on optimum structure of air-lift bio-reactor using numerical analysis of two-phase flow)

  • 김산;정지홍;이재원;손동기;고한서
    • 한국가시화정보학회지
    • /
    • 제17권3호
    • /
    • pp.24-31
    • /
    • 2019
  • Recently, an air-lift bio-reactor operated by micro bubbles has been utilized to product hydrogen fuel. To enhance the performance, characteristics of hydrodynamics inside the bio-reactor were analyzed using a numerical simulation for two-phase flow. An Eulerian model was employed for both of liquid and gas phases. The standard k-ε model was used for turbulence induced by micro bubbles. A Population Balance Model was employed to consider size distribution of bubbles. A hollow cylinder was introduced at the center of the reactor to reduce a dead area which disturbs circulation of CO bubbles. An appropriate diameter of the draft tube and hollow cylinder were optimized for better performance of the bio-reactor. The optimum model could be obtained when the cross-sectional area ratio of the hollow cylinder to the reactor, and the width ratio of the riser to the downcomer approached 0.4 and 3.5, respectively. Consequently, it is expected that the optimum model could enhance the performance of the bio-reactor with the homogeneous distribution and higher density of CO, and more effective mixing.

PBAST/PVA 이중층 중공미세구의 제조에 관한 연구 (A Study on the Preparation of PBAST/PVA Double Layered Hollow Microspheres)

  • 송명숙;우제완
    • 청정기술
    • /
    • 제14권4호
    • /
    • pp.256-264
    • /
    • 2008
  • 본 연구에서는 생분해가 가능하여 친환경성이 우수한 지방족 폴리에스터 중에서 PBAST를 이용하여, 다중유화법($W_1/O/W_2$)에 의해 PBAST/PVA 두층을 갖는 중공미세구를 제조하였다. 최적의 이중층 중공미세구를 얻을 수 있는 조건은, 유기상에서 의 PBAST고분자의 농도 5 wt%, 내부 수용액 상에서의 PVA의 농도 5 wt%, $W_1/O$ emulsion과 외부 수용액상의 비율이 1:4.5이었고 계면활성제는 단일 성분을 사용하는 경우보다 HLB 값의 차이가 큰 보조계면활성제(co-surfactant)를 사용하는 경우였으며, 이때 PBAST/PVA 이중층중공미세구(double-layered microsphere)의 제조 수율은 30.92%, 미세구의 총괄밀도(bulk density)는 0.180 g/ml이며 입자크기는 $1.5{\sim}3\;{\mu}m$로 고른 분포를 나타내었다.

  • PDF

고압 전력기기에서의 $SF_6$ Gas 사용단계별 배출특성에 관한 연구 ($SF_6$ Emission Characteristics at High Voltage Equipments in use-phase Stage)

  • 박정주;조연행
    • 전기학회논문지
    • /
    • 제57권12호
    • /
    • pp.2199-2201
    • /
    • 2008
  • Sulfur hexafluoride($SF_6$) is a gaseous dielectric used in high voltage electrical equipment such as an insultor or arc quenching medium in the transmission and distribution of electricity. however, $SF_6$ is one of the greenhouse gases(GHG) with a global warming potential that is 23,900 times greater than that of carbon dioxide($CO_2$). for this reason, $SF_6$ emissions in electric equipment shall be controlled to reduce GHG and improve cost-effective use of $SF_6$ for economical benefits. Until recently there has not been any investigation on $SF_6$ emission characteristics and inventory in Korea. To understand emission characteristics during the use-phase, the scope of this study was limited to the following closed pressure system equipment from 10 substations in Korea. This study highlights (1) the investigation of sampling/analysis methodology for $SF_6$ emissions in high voltage equipment, (2) the estimation of $SF_6$ emissions in the use-phase, and (3) the comparison between the emission ratio and the mass-balance applied to inventory study. According to this study, the majority of emissions were related to electric equipment nameplates and the rest of the emissions were related to the handling of $SF_6$ during operations. from this result, emission ratios estimated from this study were similar; GIS was 14% and GCB was 13%, as maintenance process conditions were the same as manual process conditions for both equipment.

극저온냉동기를 이용한 자연순환 루프의 실험 (Experiment of Natural Circulation Loop Using a Cryocooler)

  • 김민지;장호명
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회B
    • /
    • pp.2194-2199
    • /
    • 2007
  • An experimental study is performed to investigate the thermal and flow characteristics of subcooled liquid nitrogen in a natural circulation loop. Experimental apparatus is designed and constructed such that a closed loop is cooled at the top by a cryocooler and heated nearly at the bottom by cartridge heaters. Steady state is obtained by controlling the heating power to the cartridge heaters and a thin-film heater to reduce the cooling power of the cryocooler. Temperature is measured at several locations of the loop and the mass flow rate through the loop is estimated from the energy balance in terms of the measured temperatures. Experiment is repeated for various values of the vertical height between the cooling and heating parts. The results show that the heat transfer capability of the loop has a maximum at a certain value of height. The optimal height to maximize the heat transfer is in a good agreement with analytical prediction to take into account the buoyancy and viscous forces in the loop.

  • PDF

하이브리드 연소의 수치 모델링 전략에 관한 연구 (Study on the Strategy of Numerical Modeling for Hybrid Combustion)

  • 윤창진;김진곤;문희장
    • 항공우주시스템공학회지
    • /
    • 제1권2호
    • /
    • pp.37-42
    • /
    • 2007
  • This paper proposes a numerical modeling approach to simulate the hybrid combustion phenomena. From the physical understandings of hybrid combustion, the computational domain was separated into three regions: the solid fuel, gas phase reactive flow, and the interface between solid and fluid. Moreover, for the accurate calculation, computational grids for these regions was generated at every time step considering the instantaneous moving interface which are governed by the balance equations using thermal pyrolysis. In the domain of reactive flow, by virtue of diffusion flame structure, turbulent combustion modeling was introduced using either mixture fraction approach or mean reaction rate approach.

  • PDF

Dietary Regulations of the Intestinal Barrier Function at Weaning

  • Bosi, Paolo;Gremokolini, Cyrien;Trevisi, Paolo
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제16권4호
    • /
    • pp.596-608
    • /
    • 2003
  • Weaning is a complex phase when the mammal suffers the action of different stressors that contribute to negatively affect the efficiency of the intestinal mucosa and of the whole local integrated system, that acts as barrier against any nocuous agent. The components of this barrier are mechanical, chemical, and bacteriological; immunological and not. The development of contact with a saprophyte microflora and the maintenance of feed intake after the interruption of motherly nutrition are essential for the maturation of an equilibrated local immune function and for a functional integrity of villi. Opportunities and limits of some dietary strategies that can contribute to reduce negative effects of weaning on health and performance are discussed. Knowledges on the possible mechanism of action of probiotics are upgraded, particularly for their supposed role in the balance between different immune functions (effectory/regulatory). Some tools to control pathogen microflora are reviewed (acids, herbs, immunoglobulin sources) and practical feeding systems are proposed.