• 한국환경보건학회지
• /
• 제31권1호
• /
• pp.86-93
• /
• 2005

Because generally large amount of sludges are generated from the process of sewage and wastewater treatment, the management and controlment of those sludge has become a important issue in many researches. In this dissertation, we conducted the research to see the physico-chemical characteristics of sludges generated from various sources. Moisture of sludges were 81.5% in textile industries, 81.4% in frame metal industries, 80.7% in 1st metal industries. Volatile solid were 22.1% in hide · rubber industries, 21.9% in coke · petroleum industries. Fixed solid were 18.5% and 17.7% in the 1st metal industries and frame metal industries. High heating value by wet base were 1,850 kcal/kg in coke · petroleum industries, 1,220 kcal/kg in hide · rubber industries, but sludges from the 1st metal industries and frame metal industries were impossible to incinerate because most of those sludges were inorganic. The leaching test showed that hazardous materials was detected in nearly every kinds of sludges. Some of sludges from hide · rubber industries and frame metal industries exceeded the leaching criteria and so they were classified as specific wastes. And other sludges generated in sewage treatment plants or other industries was below the leaching criteria.

• Bulletin of the Korean Chemical Society
• /
• 제34권5호
• /
• pp.1435-1440
• /
• 2013

To investigate the influence of the carbon matrix on the electrochemical performance of Si/C composites, four types of Si/C composites were prepared using graphite, petroleum coke, pitch and sucrose as carbon precursors. A ball mill was used to prepare Si/C blends from graphite and petroleum coke, whereas a dispersion technique was used to fabricate Si/C composites where Si was embedded in disordered carbon matrix derived from pitch or sucrose. The Si/pitch-based carbon composite showed superior Si utilization (96% in the first cycle) and excellent cycle retention (70% after 40 cycles), which was attributed to the effective encapsulation of Si and the buffering effect of the surrounding carbon matrix on the silicon particles.

• Carbon letters
• /
• 제9권3호
• /
• pp.210-217
• /
• 2008

Petroleum pitch and coke with wet mixture method or with dry mixture method were investigated to develop the composite anodic carbon material of high power lithium ion battery. Cokes coated with pitch were obtained by the heat treatment of mixture of cokes and pitch with different weight ratios at $800{\sim}1200^{\circ}C$. The charge and discharge characteristic of the consequent composite anodic carbon material assembled in batteries was tested. Cokes with wet mixture method have a smooth surface and their capacity changed little with changing temperature and content as compared to the cokes with dry mixture method. Although the reversible capacities showed different values by the anode manufacturing method, the composite anode with the mixture of 20 wt% of petroleum pitch and 80 wt% of coke showed the higher power capability and initial efficiency than the pitch based anode. However, the reversible capacity of the composite anode showed the reduced value as compared with the pitch based anode.

• 공업화학
• /
• 제3권3호
• /
• pp.451-463
• /
• 1992

유동층 반응기에서 함티탄자철광의 염소화 반응에 의해 함티탄자철광중의 철분만을 선택적으로 분리할 수 있는 염소화 조건과 아울러 rutile 대용품의 제조 가능성을 조사하였다. 염소화 반응의 적정조건은 반응온도 $950^{\circ}C$, 반응시간 2시간, 함티탄자철광에 대한 환원제 petroleum coke의 무게비 0.12 그리고 염소가스의 유속은 5cm/sec이었다. 이 반응조건하에서 얻어진 반응잔사는 $TiO_2$함량 70%이며 X-선 회전분석 결과 rutile로 확인되는 rutile 대용품이었다.

• 한국세라믹학회지
• /
• 제30권7호
• /
• pp.557-562
• /
• 1993

Following conclusions are made from the detalied research on the relation between the phase change of the petroleum raw cokes after ball milling and the preheat treatment temperature. The petroleum raw cokes species are preheated in the temperature range of 350~45$0^{\circ}C$. At the preheat treatment temperature of 40$0^{\circ}C$ the particles of petroleum raw cokes from ball milling become spheically shape with the almost uniform particle size distribution of 1~5${\mu}{\textrm}{m}$. At the same temperature, they became low-graphitized with the d0.02 X-ray diffraction index of 3.41$\AA$. The carbon material made from the petroleum raw cokes at 40$0^{\circ}C$ turned out to have the good modulus of rupture about 600kg/$\textrm{cm}^2$, with the bulk density around 1.8g/㎤ and the appearent porosity around 8%.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.453-456
• /
• 2007

감압 증류 후 생성되는 중질유의 고도화를 위하여 코킹 공정을 거친 후 정유 부산물로 생성되는 열적으로 매우 안정하고, 높은 발열량을 갖는 반면 황, 바나듐 함량이 높은 석유코크스의 효과적인 이용을 위하여 본 연구에서는 가스화 공정을 적용하였다. 1T/D 용량의 분류층 가스화기를 이용하여 유연탄(drayton coal), 석유코크스, 또는 혼합한 경우의 가스화 성능을 알아보았으며, 각각의 경우에 대하여 비교하여 보았다. 높은 열 안정성을 갖는 석유코크스의 효과적인 가스화를 위하여 반응기 내 체류시간 및 버너 노즐 변경에 따른 가스화 성능 개선을 시도하였으며, 이때의 온도, 산소/원료 공급량 조건에 따른 생성가스 성분 및 탄소전환율, 냉가스효율 변화 특성을 알아보았다. 버너 노즐 구경 변경으로 인한 슬러리의 미립화를 통하여 향상된 탄소전환율 및 냉가스효율을 얻을 수 있었다.

• 한국세라믹학회지
• /
• 제30권10호
• /
• pp.852-858
• /
• 1993

The effect of coal tar ptch-impregnated carbon materials which were made from petroleum coke was investigated at various pressure time and impregnation-sintering cycle. As a result, density and bending strength of the carbon materials were remarkably increased in the condition of pressure times of 5hrs and of the cycle of 3rd times. And the value of d002 and Lc of the graphitic carbon sintered at 230$0^{\circ}C$ shwoed 3.387$\AA$ and 167$\AA$, respectively.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권6호
• /
• pp.328-334
• /
• 2000

A lithium ion secondary battery using carbon as a negative electrode has been developed. Further improvements to increase the cell capacity are expected by modifying the structure of the carbonaceous material. There are hopes for the development of large capacity lithium ion secondary batteries with long cycle, high energy density, high power density, and high energy efficiency. In the present paper, needle cokes from petroleum were examined as an anode of lithium ion secondary battery. Petroleum cokes, MCL(Molten Caustic Leaching) treated in Korea Institute Energy Research, were carbonized at various temperatures of 0, 500, 700, $19700^{\circ}C$ at heating rate of $2^{\circ}C$/min for lh. The electrolyte was used lM liPF6 EC/DEC (1:1). The voltage range of charge & discharge was 0.0V(0.05V) ~ 2.0V. The treated petroleum coke at $700^{\circ}C$ had an initial capacity over 560mAh.g which beyond the theoretical maximum capacity, 372mAh/g for LiC6. This phenomena suggests that carbon materials with disordered structure had higher cell capacity than that the graphitic carbon materials.

• 공업화학
• /
• 제21권1호
• /
• pp.11-17
• /
• 2010

유기용액계 전해질을 갖는 전기이중층캐패서터의 성능향상을 위해 마이크로파 처리를 통하여 활성탄소를 개질하고 이에 따른 전기화학적 특성의 변화를 조사하였다. 대상 시료로 petroleum cokes와 pitch cokes를 사용하여 NaOH 활성화에 의해 제조한 활성탄과 시판용 활성탄 BP-25를 사용하였다. 세 종류의 활성탄 모두 마이크로파 처리를 통해 산소를 포함하는 친수성관능기들이 표면으로부터 제거되었으며, 처리 시간이 증가함에 따라 비표면적과 세공부피는 감소하고, 평균세공직경은 증가하였다. 이러한 영향으로 표면 개질된 활성탄소로 제조한 전기이중층캐패시터는 계면저항이 개질하지 않은 활성탄소를 사용한 전기이중층 캐패서터에 비해 크게 감소하였으며, 비표면적의 감소에도 불구하고 방전용량은 개질하지 않은 경우보다 크게 증가하였다.

• 공업화학
• /
• 제7권6호
• /
• pp.1115-1124
• /
• 1996

MCL(Molten Caustic Leaching) 처리는 알카리에 의해 황성분 및 회분을 제거할 수 있도록 유용하게 개발된 화학적 정제공정이며, Si, Fe, V, Ni 등과 같은 무기물을 수용성염으로 전환을 시켜 제거한다. 그리고 MCL은 다른 탈황 공정보다도 탄소손실을 최소로할 수 있는 장점이 있다. 본 연구에서 황성분 및 회분제거에 대한 반응변수로는 침출온도, 침출시간, NaOH/cokes 비율, 산세정 농도와 세정 시간 그리고 입자크기 등이었다. 최적의 조건에서 MCL 처리를 한 결과 황성분과 회분은 각각 99%와 90%가 제거되었으며, 이때 FT-IR과 SEM의 결과에서 petroleum cokes 입자의 구조 및 표면변화는 침출온도 및 황성분과 회분의 제거율에 밀접한 관계를 나타내었다.