• 제어로봇시스템학회논문지
• /
• 제5권7호
• /
• pp.794-799
• /
• 1999

This study deals with robustness bounds estimation for uncertain linear systems with structured perturbations where the eigenvalues of the perturbed systems are guaranteed to stay in a prescribed region. Based upon the Lyapunov approach, new theorems to estimate allowable perturbation parameter bounds are derived. The theorems are referred to as the zero-order or first-order asymmetric robustness measure depending on the order of the P matrix in the sense of Taylor series expansion of perturbed Lyapunov equation. It is proven that Gao's theorem for the estimation of stability robustness bounds is a special case of proposed zero-order asymmetric robustness measure for eigenvalue assignment. Robustness bounds of perturbed parameters measured by the proposed techniques are asymmetric around the origin and less conservative than those of conventional methods. Numerical examples are given to illustrate proposed methods.

• 로봇학회논문지
• /
• 제14권4호
• /
• pp.258-263
• /
• 2019

Some animals have special sensing functions in order to find foods, home and mates. Instead of passively sensing, they discharge signals and then extract necessary information from the response. More importantly, they utilize the gradients of the sensed signal in order to find the destination or objects. In this paper this special strategy is formulated mathematically, i.e., the perturbation and the correlation based gradient estimation is developed. A stereo sensor system using temperature sensors mounted on motors is developed for verification. The proposed method can estimate the gradient of the measured value accurately. Using this method, the direction in the maximum measured value can be estimated accurately, and the position of the heat source can be estimated from the intersection of the directions estimated from both sensors.

• 전산구조공학
• /
• 제5권3호
• /
• pp.119-126
• /
• 1992

교량, 발전소, 해양구조물과 같은 토목구조물은 사용기간중에 지진, 바람, 파랑하중등에 의해 구조적 손상을 받기 쉽다. 장기간에 걸쳐 구조물에 손상이 누적되면 구조물 전체의 파괴를 초래할 수도 있다. 따라서 현존하는 구조물의 안전성을 분석하기 위한 구조물의 손상도를 추정하는 방법이 필요하다. 본 논문에서는 Inverse Modal Perturbation기법을 이용하여 구조물의 손상도를 추정하는 방법에 대하여 연구하였다. Perturbation식은 구조물의 강성 및 질량행렬의 변화량과 구조물의 고유진동수와 모우드형상의 변화량의 식으로 구성된다. 또한 구조물의 손상은 강성행렬의 변화량으로 표현하였다. 본 연구에서는 구조물의 손상도추정의 효율성을 증대시키기 위하여 2차-Perturbation식을 구성하고, 이것을 반복적인 절차를 거쳐 해를 구하는 방법에 대하여 연구하였다. 제안된 방법의 효율성은 일련의 예제해석을 통하여 검증하였으며, 추정된 결과로 부터 본 방법이 구조물의 손상을 적절히 산정함을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제21권2호
• /
• pp.99-110
• /
• 1989

원자로 지논 농도의 최적 제어는 Linear Quadratic Regulator Problem이다. 지논 농도와 아이오다인 농도는 측정할 수 없기 때문에 최적 제어를 수행하기 위해서는 측정할 수 없는 상태 변수를 예측하는 것이 필요하다. 본 연구에서 사용된 예측방법은 Luenberger Observer를 기초로 했다. 원자로 상태 방정식은 빠른 상태 방정식(중성자 속, 핵연료 및 냉각재 온도)과 느린 상태 방정식(아이오다인, 지논)의 상호작용에 의해 Stiffness 문제가 발생되는데 이러한 시스템을 "Singularly Perturbed System"이라 한다. Stiffness문제를 해결하기 위해서 원 시스템을 느린 시스템과 빠른 시스템의 두 개의 모드로 나누는 Singular Perturbation Method를 사용한다. 예측기Observer를 이용한 원 시스템의 제어기는 느린 시스템과 빠른 시스템에 대한 분리된 예측기와 제어기의 설계에 의해 결정되어진다. 특히 원자로 상태 방정식에서는 빠른 모드는 빨리 사라지게 되므로 단지 느린 시스템에 대해서만 예측기를 설계하면 된다. 컴퓨터시뮬레이션을 통한 시험 결과는 원자로의 지논 진동은 Singular Perturbation Method와 예측기를 이용해서 거의 정확하게 효과적으로 짧은 시간내에 제어할 수 있음을 알았다.수 있음을 알았다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.65-70
• /
• 2003

본 연구에서는 섭동가속도의 변화식으로 주어지는 궤도 섭동 방정식으로부터 지구 편원현상과 대기저항에 의해 기인하는 궤도요소들의 변화를 표현하고 궤도 일회전당 변화량을 근거로 하여 대기저항에 의한 속도 보정과 그에 필요한 연료소모량을 효과적으로 예측하는 방법을 제시하고 그 기법을 다목적위성 궤도해석에 적용하였다. 그리고 궤도 해석을 위해 위성에 영향을 미치는 섭동력을 비대칭 중력장, 대기 저항력, 태양과 달의 인력, 태양 복사압에 의한 영향을 계산하여 정량적으로 비교 분석하였다.

• 제어로봇시스템학회논문지
• /
• 제15권1호
• /
• pp.72-81
• /
• 2009

This paper presents a robust adaptive control method using model reference control strategy against autonomous robot systems with random friction nature. We approximate a nonlinear robot system model by means of a feedback linearization approach to derive nominal control law. We construct a Least Square (LS) based observer to estimate friction dynamics online and then represent a perturbed system model with respect to approximation error between an actual friction and its estimation. Model reference based control design is achieved to implement an auxiliary control in order for reducing control error in practice due to system perturbation. Additionally, we conduct theoretical study to demonstrate stability of the perturbed system model through Lyapunov theory. Numerical simulation is carried out for evaluating the proposed control methodology and demonstrating its superiority by comparing it to a traditional nominal control method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.614-619
• /
• 2004

The line-of-sight (LOS) stabilization system is a precision electro-mechanical gimbals assembly for rejecting vibration to isolate the load from its environment and point toward the target in a desired direction. This paper describes the design of gimbals system to reject the disturbance and to improve stabilization. To generate movement commands for the actuators in the stabilization system, the control system uses a sensor of angular rotation. The controller is a DSP with transducer and actuator interfaces. Unknown parameters of the gimbals are estimated using the signal compression method. The cross-correlation coefficient between the impulse response from the assumed model and the one from model of the gimbals is used to obtain the better estimation. And SMCPE (sliding mode control with perturbation estimation) is used to control the gimbals. SMCPE provides robustness of the control against the modeling deficiencies and unknown disturbances. In order to compare the performance of SMCPE with the classical SMC, a sample test result is presented.

• 로봇학회논문지
• /
• 제12권1호
• /
• pp.1-10
• /
• 2017

For dismantling heavy structure under special environment in radioactivity, there are many problems which should be tele-operated and feedback a cutting force for cutting a thick structure such as concrete. When operator dismantles a thick heavy concrete structure, it is in sufficient to judge whether robot is contacting or not with environment by using only vision information. To overcome this problem, force feedback and impedance model based bilateral control are introduced. The sliding mode control with sliding perturbation observer (SMCSPO) based bilateral control is applied and surveyed to a single rod hydraulic cylinder in this paper. The sliding mode control is used for robustness against a disturbance. The sliding perturbation observer is used for estimation of a reaction force such as cutting force. The bilateral control is executed using the information of reaction force estimated by SMCSPO. The contribution of this paper is that the estimation method and bilateral control of the single rod hydraulic cylinder are introduced and discussed by experiment.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권2호
• /
• pp.117-123
• /
• 2001

To improve control performance of a non-linear system, many other reserches have used the sliding model control algorithm. The sliding mode controller is known to be robust against nonlinear and unmodeled dynamic terms. However, this algorithm raises the inherent chattering caused by excessive switching inputs around the sliding surface. Therefore, in order to solve the chattering problem and improve control performance, this study has developed the sliding mode controller with a perturbation estimator using the observer-based fuzzy adaptive network. The perturbation estimator based on the fuzzy adaptive network generates the control input of compensating unmodeled dynamics terms and disturbance. And the weighting parameters of the fuzzy adaptive network are updated on-line by adaptive law in order to force the estimation errors converge to zero. Therefore, the combination of sliding mode control and fuzzy adaptive network gives rise to the robust and intelligent routine. For evaluation control performance of the proposed approach, tracking control simulation is carried is carried out for the hydraulic motion simulator which is a 6-degree of freedom parallel manipulator.

• 전력전자학회논문지
• /
• 제24권2호
• /
• pp.99-104
• /
• 2019

Solar power generation systems require maximum power point tracking (MPPT) control to acquire maximum power using inefficient and high-cost PV modules. Most conventional MPPT algorithms are based on the slope-tracking concept. The perturb and observe (P&O) algorithm is a typical slope-tracking method. The two factors that determine the MPPT performance of P&O algorithm are the MPPT control period and the magnitude of the perturbation voltage. The MPPT controller quickly moves to the new maximum power point at insolation change when the perturbation voltage is set to large, and the error of output power will be huge in the steady state even when insolation is not changing. The dynamics of the MPPT controller can be accelerated even though the perturbation voltage is set to small when the MPPT control period is set to short. However, too short MPPT control period does not improve MPPT performance but consumes the MPPT controller resources. Therefore, analyzing the performance of the MPPT controller is necessary for actual insolation conditions in real weather environment to determine the optimum MPPT control period and the magnitude of the perturbation voltage. This study proposes an optimum MPPT control period that maximizes MPPT efficiency by measuring and analyzing actual insolation profiles in typical clear and cloudy weather in central Korea.