• 폴리머
• /
• 제35권4호
• /
• pp.363-369
• /
• 2011

콘크리트 제조 시 사용되는 잉여수를 지연 흡수시키기 위하여 역유화중합법으로 중합된 가교 poly(sodium acrvlate) (cPSA)를 ethylene glycol dimethacrylate(EGDMA)로 표면 가교시켰다. cPSA의 제조에서 연속상은 paraffin liquid, 단량제는 8 M 농도의 NaOH 수용액으로 90% 중화된 acrylic acid(AA), 가교제는 N,N-methylene bisacrylamide(MBA), redox 개시제는 ammonium persulfate(APS)와 sodium metabisulfite(SMBS)를 사용하여 역유화중합법으로 제조하였다. 제조된 cPSA는 EGDMA플 사용하여 표면 가교 반응을 수행하였다. 시멘트 수용액에서 $Ca^{2+}$ 이온과 cPSA의 상호 작용을 관찰하기 위하여 FTIR spectroscopy 분석법을 사용하였다. 제조된 흡수제들을 탈이온수 $Ca(OH)_2$ 수용액(pH 12) 및 시멘트 포화 수용액에서의 팽윤비를 측정하였으며, cPSA는 2시간만에 팽윤이 완료되었지만, 표면이 가교된 cPSA-EGDMA는 3시간 후 팽윤이 거의 완료되는 것을 관찰하였다. 또한 합성한 cPSA-EGDMA를 첨가함으로써 시멘트의 응결시간과 모르타르의 압축강도 증가를 관찰하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1669-1674
• /
• 2012

A novel superabsorbent composite was prepared by intercalation polymerization of acrylic acid (AA) and 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS) in the presence of montmorillonite (MMT), using ammonium persulfate (APS) as an initiator and $N,N'$-methylenebisacrylamide (MBA) as a cross linker. The superabsorbent composite was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). Maximum absorbency of the composite in distilled water and 0.9% sodium chloride solution was 722 and 108 g/g, respectively. The composite was used for removal of heavy metal ions from aqueous solutions. Maximum amount of adsorption for $Ni^{2+}$, $Cu^{2+}$ and $Pb^{2+}$ was 211.0, 159.6 and 1646.0 mg/g, respectively, and the adsorption was in accordance with both Langmuir and Freundlich model. The composite could be regenerated and reused in wastewater treatment.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.2966-2970
• /
• 2012

Fullerene/polystyrene ($C_{60}$/PS) nano particle was prepared by using emulsion polymerization. Styrene and fullerene were emulsified in aqueous media in the presence of poly(N-vinyl pyridine) as an emulsion stabilizer, and polymerization was initiated by water soluble radical initiator, potassium persulfate. The obtained nano particles have an average diameter in the range of 400-500 nm. The fullerene contents in the nano particle can be controlled up to 15 wt % by varying the feed ratio, which was confirmed by themogravimetric analysis (TGA) and elemental analysis (EA). The structure and morphologies of the $C_{60}$/PS nano particles were examined by various analytical techniques such as dynamic light scattering (DLS), scanning electron microscope (SEM), transmission electron microscope (TEM), electron diffraction (ED) pattern, X-ray powder diffraction (XRD), and UV spectroscopy. Unlike conventional $C_{60}$/PS particles initiated by organic free radical initiators, in which the fullerene is copolymerized forming a covalent bond with styrene monomer, the prepared $C_{60}$/PS nano particles contain pristine fullerene as secondary particles homogeneously distributed in the polystyrene matrix.

• 폴리머
• /
• 제30권4호
• /
• pp.286-292
• /
• 2006

Super water-absorbent resins were prepared by inverse suspension copolymerization of sodium acrylate, acrylamide and 2-hydroxyethyl acrylate using N, N'-methylene-bis-acrylamide as cross-linker. For the suspension copolymerization, monohexadecyl phosphate was employed as the dispersing agent, cyclohexane as the dispersing medium and potassium persulfate as the initiator. The dependence of water-absorption capacity on the amount of crosslinking agent, oil/water ratio, degree of neutralization and the composition of the copolymer were systematically investigated. Furthermore, the swelling kinetics of the super water-absorbent copolymer was carried out. The absorption of the resins is more than 1800 g/g for deionized water and 100 g/g for 0.9% NaCl solution, respectively. The copolymers showed an increased salt resistance and enhanced water retention of soil.

• Macromolecular Research
• /
• 제12권2호
• /
• pp.213-218
• /
• 2004

We have performed dispersion polymerization of acrylamide in tert-butyl alcohol/water mixture-using hydroxypropyl cellulose and ammonium persulfate as the stabilizer and the initiator, respectively - to study the effects that the concentration of monomer, initiator, and stabilizer, the tert-butyl alcohol/water ratios as polymerization media, and the reaction temperature have on, among other things, the polymerization kinetics, particle sizes, and molecular weights. The polymerization rate increased upon increasing the concentration of the monomer, initiator, and stabilizer, the water content in the tert-butyl alcohol/water media, and the polymerization temperature. The average particle size of the lattices increased upon increasing the concentration of initiator, the polymerization temperature, and the water content in the tert-butyl alcohol/water media, but it decreased upon increasing the concentration of monomer and stabilizer. The viscosity-average molecular weight increased upon increasing the concentration of monomer and stabilizer and the water content in the tert-butyl alcohol/water media, but it decreased upon increasing both the concentration of initiator and the polymerization temperature.

• 한국생활과학회지
• /
• 제14권3호
• /
• pp.433-439
• /
• 2005

In this study, we investigated the morphological and physical changes of hair after bleaching treatments with different concentration of hydrogen peroxide in bleaching agent (3, 6, 9, or 12%) and various treatment time (10, 30, or 60 minutes). Tresses of virgin black hair were bleached using a commercial ammonium persulfate-hydrogen peroxide solution. The tensile strength of virgin hair treated with a bleaching agent depended on the concentration of hydrogen peroxide and the treatment time. As the concentration of hydrogen peroxide in bleaching agent went high and the treatment time increased, the tensile strength of the hair increased but the extension degree decreased. The virgin hairs which were not treated by bleaching agent showed morphologically healthy cuticle, whereas the bleached hairs showed swelled and damaged cuticle patterns. The swelling of the hair and the breaks of the cuticles increased positively by the concentration of hydrogen peroxide and the treatment time. These results suggest that exposure to more concentrated hydrogen peroxide with other bleaching components may lead to more severe hair damage.

• 공업화학
• /
• 제16권3호
• /
• pp.397-402
• /
• 2005

Core-shell 형의 Poly(styrene-co-N-isopropylacrylamide) (poly(St-co-NIPAm)) 마이크로겔은 과항상칼륨(KPS)을 개시제로 사용하여 styrene (St)과 N-isopropylacrylamide (NIPAm)의 무유화 유화중합으로 제조하였다. St/NIPAm의 비, 모노머의 농도, 가교제의 농도에 따른 입자크기의 영향을 조사하였으며 고분자 마이크로겔의 온도에 따른 열감응성을 조사하였다. 마이크로겔의 입자 크기는 NIPAm의 몰비에 따라 증가하였으며 마이크로겔 분산용액의 투과도가 하한임계온도 이상($32{\sim}34^{\circ}C$)에서는 급격히 감소였다. 수용액 중에서 마이크로겔의 팽윤성은 모노머인 NIPAm의 농도가 증가할수록 증가하였으며 가교제의 농도에 따라서 감소하였다.

• 한국응용과학기술학회지
• /
• 제22권2호
• /
• pp.191-199
• /
• 2005

Removable protective adhesives for automobiles were synthesized by an emulsion polymerization of monomers such as n-butyl acrylate (BA), n-butyl methacrylate (BMA), acrylonitrile (AN), acrylic acid (AA) and 2-hydroxyethyl methacrylate (2-HEMA), in which AA and 2-HEMA were functional monomers. Potassium persulfate (KPS) was used as an initiator and sodium lauryl sulfate (SLS) was used as an emulsifier, and polyvinyl alcohol (PVA) was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch type reactor. Tensile strength, extension, peel strength, viscosity and solid content of the synthesized adhesives were tested. The optimum physical properties of the removable protective adhesives for automobiles were obtained with the composition of 0.43 mole BA, 0.57 mole AN, 0.21 mole BMA, 0.03 mole AA, and 0.03 mole 2-HEMA.

• 한국응용과학기술학회지
• /
• 제19권4호
• /
• pp.265-272
• /
• 2002

$CaCO_{3}$ absorbed sodium lauryl sulfate (SLS) surfactant was prepared, Core-shell polymers of inorganic/organic pair, which have both core and shell component, were synthesized by sequential emulsion polymerization using styrene(St) as a shell monomer and potasium persulfate (KPS) as an initiator, We found that when $CaCO_{3}$; core prepared by adding 2,0 wt% SLS, $CaCO_{3}$ core/PSt shell polymerization was carried out on the surface of $CaCO_{3}$ particle without forming the new PSt particle during St shell polymerization in the inorganic/organic core-shell polymer preparation, The structure of core-shell polymer were investigated by measuring the degree of decomposition of $CaCO_{3}$ using HCl solution, thermal decomposition of polymer composite using thermogravimetric analyzer and morphology by scanning electron microscope.

• 한국응용과학기술학회지
• /
• 제23권2호
• /
• pp.169-176
• /
• 2006

Acrylic adhesives for automobiles protection were prepared by emulsion polymerization. Monomers used were n-butyl acrylate(BA), acrylonitrile (AN), butyl methacrylate(BMA), glycidyl methacrylate(GMA), and acrylic acid (AA). Emulsifiers used were sodium lauryl sulfate and polyoxyethylene lauryl ether, which are an anionic emulsifier and a nonionic emulsifier respectively. Potassium persulfate was used as an initiator and polyvinyl alcohol was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch reactor at $70^{\circ}C$ and agitation speed was kept at 200 rpm. Water resistance, heat resistance, acid resistance, alkali resistance and smoke resistance were examined. As a result, when each 0.03 mole of GMA and AA was introduced, the adhesion properties and various above mentioned resistances of the prepared adhesives were satisfied the standard for automobiles.