• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.794-799
• /
• 2005

In this paper, the inductive power collector using electromagnetic induction for the PRT(Personal Rapid Transit) system is suggested and some ideas for power collector design to improve the power transfer performance are presented. The proposed the inductive power collector is used for the PRT system, which has a large air-gap and demands a large electrical power capability. But, low output power is generated due to a loosely coupled characteristic of the large air-gap. Therefore, double layer construction of secondary winding. which was divided in half to increase both output current and output voltage was suggested. Also, model of power collector and parallel winding structure are presented, in addition, the performance of inductive power collector to alignment condition between the primary power line and the inductive power transformer was verified by computer simulation of 2kW model.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.218-220
• /
• 2004

In this paper, the concept of contactless inductive power transfer system used for the PRT system is suggested and some ideas for Power transformer design to improve the power transfer performance are presented. This system has a large air-gap and demands a large electrical power capability But, low output power is generated due to a loosely coupled characteristic of the large air-gap. Therefore, double layer construction of secondary winding, which was divided in half to increase both output current and output voltage was suggested. In addition, the performance of power transformer alignment condition between the primary power line and the power collector was verified by computer simulation of 2kW model.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.4-4
• /
• 2006

Since the introduction of TFT LCDs in portable personal computers (notebooks) in the early 1990's, the TFT LCD industry has experienced several waves of technology revolution: (1) product introduction, (2) performance enrichment, (3) power utilization and material utilization, and (4) human-interface functions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.9
• /
• pp.39-46
• /
• 2007

This paper presents a programmable single-phase ac power source that provides a sinusoidal output voltage with an adjustable output amplitude and frequency over a wide range as well as an arbitrary waveform. The ac power source under consideration have a linear power amplifier. The desired output values can be programmed with a personal computer. The power source operates at 220[V]/60[Hz] mains and the output voltage is isolated from the input circuit. The system consists mainly of a power converter to generate and amplify the waveform signal, a controller to control the desired output signal and measure the output parameters, and a control program to set the desired output and display the values. The prototype ac power source was constructed and tested with the results demonstrating a good performance.

• Journal of Korean Academy of Nursing
• /
• v.25 no.4
• /
• pp.790-806
• /
• 1995

The present study examined the causal relationships among nurses' job environment /job characteristics(work overload, lack of autonomy, professional role conflict, interpersonal relationships), maturity, job stress, job satisfaction and turnover intention by constructing and testing a theoretial framework. Based on Katz and Kahn's (1978) theory of organizational open system and Kahn, Wolfe, Quinn, and Snoek's (1964) theory of stress, nurses' turnover intention, job satisfaction and job stress were conceived of as outcomes of the interplay between personal characteristics and work environment. Personal aspects associated with outcome variables included professional knowlege and skill, and maturity(challenge, commitment, control, responsibility). The work environment factors involved work overload, lack of autonomy, professional role conflict, and interpersonal relationships (social support). Three university hospitals located in Seoul were selected to participate. The total sample of 443 registered nurses represents a response rate of 96 percent. Linear structural relationships (LISREL) technique was used to test the fit of the proposed conceptual model to the data and to examine the causal relationships among variables. The result showed that both the proposed model and the modified model fit the data excellently, revealing considerable explanatinal power for job stress and job satisfaction. The explanatory power of turnover intention was relatively lower than those of stress and satisfaction. In predicting nurses' stress, satisfaction and turnover intention, the findings of this study clearly demonstrated that professional role conflict might be the most important variable of the all the environmental variables and personal characteristics. The results were dis-cussed, including directions for the future research and practical implications drawn from the research were suggested.

• Journal of computational fluids engineering
• /
• v.18 no.1
• /
• pp.58-62
• /
• 2013

Personal Rapid Transit (PRT) is the emerging personal transport vehicle operating on the loop automatically. The PRT system utilize the electrical power from super capacity or battery, it is important to manage the power or energy. In this regards, the management of high temperature occurred by the operation of system is significantly important to prevent from serious damage of component. In this study, we studied the adequate shape of underbody which can reduce the heat accumulation by pickup coil and condenser using natural air cooling. We suggested the additional air pathway, air inlet and flow separator to decrease the temperature of the heat source components. It was found that suggested system can decrease the temperature of PRT under body by 16% during the static mode and by 10% during the running mode at 30km/h. It is expected that the findings of this study will feed into final design of newly built Korean PRT vehicle.

• Journal of Aerospace System Engineering
• /
• v.13 no.3
• /
• pp.56-63
• /
• 2019

Performance analyses were performed on a propeller developed for use in a PAV (Personal Air Vehicle) under 600 kg Maximum Take-Off Weight (MTOW). The actuator disc theory and CFD analyses were used to estimate the hovering time with regards to MTOW variation for a given battery weight. The interference induced power factor kint was introduced to account for the effect of flow interference between the propellers and to estimate the performance of counter-rotating propellers. The Maximum Figure of Merit (FM) value of the propeller pitch was determined and the design RPM range for the required power inversely obtained from the CFD results. Previous research indicate that the flight time of large multi-copter is limited by the available battery energy density. Similarly, the propeller pitch settings and spacing are important factors in reducing the kint value.

• The Journal of Information Systems
• /
• v.19 no.3
• /
• pp.209-236
• /
• 2010

Recently, utilization of mobile Internet services is rapidly increasing. To properly accelerate the vitalization of mobile Internet usage, we have to know exactly about the factors affecting potential users' value recognition and intention to use. Technology acceptance model (TAM) is one of the most powerful reference framework for the individual user's adoption of IT innovations. This research borrowed core concept of TAM, and tried to explain users' intention to use mobile Internet by understanding the direct and indirect effects of subjective norm and perceived usefulness. To increase the explanatory power of the model, this paper introduced personal innovativeness as a key moderator variable. The research findings include; i) subjective norm has strong positive influence on perceived usefulness and intention to use, ii) perceived usefulness has positive influence on intention to use, iii) the influence of subject norm is greater than that of perceived usefulness, iv) positive influence of subjective norm on the perceived usefulness and intention to use are significantly stronger in the case of low personal innovativeness sub-group than the case of high personal innovativeness sub-group, and v) high personal innovativeness sub-group have shown strongly positive influence of perceived usefulness on the intention to use while there is no such significant relationship in the case of low personal innovativeness sub-group. Based on these findings, this paper proposed several guidelines to increase the adoption and the usage of mobile Internet; i) word-of-mouth is extremely important, ii) to form a good word-of-mouth, it will be very important to make early adopters and heavy users have positive direct experiences of using mobile Internet.

• Fashion & Textile Research Journal
• /
• v.9 no.1
• /
• pp.49-54
• /
• 2007

In the 21th century, the age of image, people express and evaluate with images. Image is a symbol of a person or a thing. It simulates people's visual sense most quickly and precisely and is shared in the society. At the time, since it is acknowledged that there are few books available and lack of theoretical system with regard to image making, the purpose of this study was to get a theoretical access to image making by taking as an empirical case the case of Choi Byeongryeol, a candidate running for the congress in June 4, 1998 and combining it with theories of costume. Research methods employed here were to investigate the theoretical system of image making and fashion direction, and to analyze empirical cases. The boundary of the empirical case was limited to the candidate's fashion direction during the election period for 50 days from April 1998 to the election date June 4, 1998. The results of this study are as follows. First, personal image making aims at the establishment of one's own identity through building up an ideal image. Second, it is found that personal image making can make a complete image possible through fashion direction. Third, it is found that fashion direction functions as a symbol and communicative means with a result that the effect can penetrate to the society accurately and quickly. Fourth, it is found that fashion direction fit for a situation can enhance personal values and reinforce his or her competitive power to carry out the ultimate goals in the society. This study proved that fashion styling for personal image making expresses a person in a symbolic image, enhances his/her personal value in the society and, ultimately, contributes to the establishment of an individual's identity.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.5
• /
• pp.1205-1219
• /
• 2019

As the ability to use data becomes competitive power in the data-driven economy, the effort to create economic value by using personal data is emphasized as much as to protect personal data. EU's PSD2(the second Payment Service directive) became the initiative of the Open Banking trends all over the world, as it is the Mydata policy which protects the data subject's right by empowering the subject to control over the personal data with the right to data portability and promotes personal data usages and transfer. Korean government is now fast adopting EU's PSD2 in financial sector, but there is growing concerns in personal data abuse and misuse, and data breach. This study analyzes domestic financial Mydata policy in comparison with EU's PSD2 and focus on Personal information life-cycle risks of financial Mydata policy. Some suggestions on how to promote personal information and privacy in domestic financial Mydata Policy will be given.