• Corrosion Science and Technology
• /
• v.10 no.4
• /
• pp.151-155
• /
• 2011

The iron oxide particles could be resulted from the corrosion of the circulating water system of a power plant. Because it may be one of the trouble materials which affect the power generation efficiency due to the deposition on steam generator tube and turbine blade, the continuous observation of its concentration is very important. The laser induced break-down detection (LIBD) technology was applied to monitor continuously the concentration of corrosion products with the detection limit of ppb level. The measurement system consists of a Nd:YAG pulsed laser, a polarizing beam splitter, a flow-type sample cell, an acoustic emission sensor, a high speed data acquisition board, a personal computer, etc.. The performance test results confirmed that this technology can be effective to monitor the corrosion product concentration of the circulating water system of a power plant.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.289-298
• /
• 2014

Recently, the traditional paradigm in railroad technology is changing as more efficient and cost-effective electric vehicle (EV) technologies have emerged. The original concept of PRT (Personal Rapid Transit) proposed in the past has come to be regarded as unrealistic, but its feasibility is improving through the utilization of an EV platform. In particular, battery-powered vehicles pose difficult technical challenges in attempts to achieve reliable and efficient operation. However, based on the inductive power transfer (IPT) technology, the fast charging of supercapacitors with high energy density can contribute to overcoming this technical challenge and promote the transition to electric-powered ground transportation by improving the appearance of cities. This study discusses the development process of a power supply system for PRT, including concept design, numerical analysis, and device manufacturing, along with performance predictions and evaluations. In terms of results, the system was found to meet the performance requirements for power supply modules on a test-bed.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1610-1612
• /
• 2005

In this paper, the inductive power collector using electromagnetic induction for vehicle such as the PRT(Personal Rapid Transit) system is suggested and some ideas for power collector design to improve the power transfer performance are presented. The proposed the inductive power collector is used for the PRT system, which has a large air-gap and demands a large electrical power capability. But, low output power is generated due to a loosely coupled characteristic of the large air-gap. Therefore, double layer construction of secondary winding, which was divided in half to increase both output current and output voltage was suggested. Also, a model of power collector and parallel winding structure and a model of concentration/decentralization winding are presented, in addition, the performance of inductive power collector to alignment condition between the primary power line and the inductive power transformer was verified by computer simulation of 2kW model.

• Korean Journal of Human Ecology
• /
• v.8 no.2
• /
• pp.255-273
• /
• 1999

The purpose of this study was to examine the relationship between characteristics of personality and respondent characteristics of Kinetic Family Drawing for young children. The subjects were 170 children(110 boys and 60 girls). The personal interview contained Personality Characteristic Test for young children(In-Sub Song, 1993) and Kinetic Family Drawing Test(Burns and Kaufman, 1982). Results of the test were analyzed by t-test and ANOVA by SAS program. Results are followings. First, chileren's sex and the general tendency of personal characteristic showed significant difference in the emotional personality among 4 personality characteristics. Girls show more positive tendency than boys in moral, physical, appearance and feature which expressed personal feeling and emotion. Also, girls showed more positive tendency than boys in personal characteristic which showed physical ability. Second, Children's sex and individual characteristic in Kinetic Family Drawing respondent characteristic showed significant difference in own's arm length. Also, Using a rare of paper and chapter 1 of the power among the family showed significant difference in styles and symbols. The boys drew lengther arms compared with their height than the girls. The girls were less complicative, anxious, comparative and aggressive for their family. Third, As a result of the study about the relationship between 4 personal characteristics of children and individual's behavior in Kinetic Family Drawing respondent characteristic, the significant difference is showed in academic personality and social personality had higher completion of their father's feature and drew bigger feet. In socal personality, negative behavior than positive children. Fourth, As a result of the study about the relationship between 4 personal characteristics of children and individual's characteristic, the significant difference were found in academic personality, social personality, family personality and emotional personality. Children with negative academic personality drew longer arms than children with positive academic personality, social personality and family personality. Also, Children with negative emotional personality drew more siblings than children with positive emotional personality. Fifth, The academic personality and the social personality had significant difference in the relationship between 4 personal characteristics of children and dynamics. In social personality, normal children were more tendencious to look at the important person with their mother's direction than positive children. Sixth, In terms of the relationship between 4 personal characteristics of children and mode, academic personality and family personality showed significant difference. Children with negative academic personality used more edge of papers than children with positive academic personality and children with positive academic personality and children with negative family personality fold more papers than children with positive family personality. At last, there were no significant difference between 4 personal characteristics of children and styles as well as symbols.

• Journal of the Korean Society for Railway
• /
• v.17 no.2
• /
• pp.94-99
• /
• 2014

Recently, trends in new transportation system development have been primarily focused on sustainable and ecofriendly mobility solutions. The personal rapid transit (PRT) system has been considered a promising candidate in this category; its competitiveness is being improved through convergence with cutting-edge electric vehicle (EV) technologies. However, battery-powered vehicles pose difficult technical challenges in attempts to achieve reliable and efficient operation. In this study, a design approach for a solar-power assisted PRT system is presented with small-scale demonstrations aimed at circumventing challenges facing its adoption, as well as helping speed the transition to electric-powered ground transportation. From the results, it is expected that flexible photovoltaic (PV) cells will be able to supply 11% of the power required by the service equipment installed in a prototype vehicle. In particular, flexible photovoltaic (PV) cells are advantageous in terms of cost, weight, and design considerations. Most importantly, the cells' flexibility and attach-ability are expected to give them great potential for extended application in various areas.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.318-326
• /
• 2013

In this paper, a novel WUSB (Wireless USB) over WBAN (Wireless Body Area Networks) MAC protocol is proposed to improve efficiency of sensing the personal information. Furthermore, a localization technique based on that protocol is also proposed for indoor localization in a ship. For this purpose, the proposed localization algorithm minimizes power consumption and estimates location with accuracy. It is executed independently at each sensor node on the basis of WUSB over WBAN protocol. And it minimizes power consumption by estimating locations of sensor nodes without GPS (Global Positioning Systems).

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.145-153
• /
• 1997

This paper constructs a data base to create the Hull lines prior to piece manufacture and nesting steps with a personal computer using the data of created as the advanced software, TRIBON. The lines are plotted smoohtly, which are called the spline. The S/W is excellentlt estimated on the ptrcision among shipping exclusive S/W, which are currentlyused So, the S/W is mainly used as as shipping CAD program. High-cost H/W and high-performance S/W(TRIBON etc.) sre used with the bases of technique and capital power in the big shipbuilding yard; but small but small and medium-sized shipbuilding yard and related companycan't purchase dueto the high-cost product. To bring upthe small and medium sized shipbuilding yard lacking little competitive power, the data base S/W is joined with the CADRA of graphic S/W and is developed to create the Hull lines to be needed on as automatic cutting process usiing the personal computer.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.1
• /
• pp.7-13
• /
• 2011

A mixed-mode QPSK demodulator for 60-GHz wireless personal area network application is demonstrated. In this work, mixed-mode QPKS demodulation scheme achieving low power consumption and small area is employed. The prototype chip realized by 60-nm CMOS Logic process can demodulate up to 4.8-Gb/s QPSK signals at 4.8-GHz carrier frequency. At this carrier frequency, the demodulator core consumes 54 mW from 1.2-V power supply while the chip area is $150{\times}150{\mu}m^2$. Using the fabricated chip, transmission and demodulation of 1.7-GSymbol/s QPSK signal in 60-GHz link is demonstrated.

• Journal of Sasang Constitutional Medicine
• /
• v.22 no.3
• /
• pp.87-97
• /
• 2010

1. Objectives: In SCM, a personal Sasang constitution must be determined accurately before any Sasang treatment. The purpose of this study is to develop an objective method for classification of Sasang constitution. 2. Methods: We collected samples from 5 centers where SCM is practiced, and applied two-stage decision tree analysis on these samples. We recruited samples from 5 centers. The collected data were from subjects whose response to herbal medicine was confirmed according to Sasang constitution. 3. Results: The two-stage decision tree model shows higher classification power than a simple decision tree model. This study also suggests that gender must be considered in the first stage to improve the accuracy of classification. 4. Conclusions: We identified important factors for classifying Sasang constitutions through two-stage decision tree analysis. The two-stage decision tree model shows higher classification power than a simple decision tree model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.365-368
• /
• 2008

This paper presents a new concept of IP-based wireless sensor networks and also introduces a routing protocol that is based on clustering for global healthcare information system. Low-power wireless personal area networks (LoWPANs) conform the standard by IEEE 802.15.4-2003 to IPv6 that makes 6lowpan. It characterized by low bit rate, low power, and low cost as well as protocol for wireless connections. The 6lowpan node with biomedical sensor devices fixed on the patient body area network that should be connected to the gateway in personal area network. Each 6lowpan nodes have IP-addresses that would be directly connected to the internet. With the help of IP-address service provider can recognize or analysis patient biomedical data from anywhere on globe by internet service provider equipments such as cell phone, PDA, note book. The system has been evaluated by technical verification, clinical test, user survey and current status of patient. We used NS-2.33 simulator for our prototype and also simulate the routing protocols. The result shows the performance of biomedical data packets in multi-hope routing as well as represents the topology of the networks.