• Journal of the Economic Geographical Society of Korea
• /
• v.8 no.2
• /
• pp.267-284
• /
• 2005

This study analyzes the effects of localities' competitiveness which can contribute to employment growth in industries, on economic development in the local jurisdictions. For this analysis, such competitiveness is measured by competitive shares calculated from the application of a shift-share method to the employment growth in industries each locality witnessed over the 1990s. And we use annual population growth rate and average annual per capita income (substituted by per capita head tax derived from income tax) of the early 2000s as variables of local economic development. The analysis targets 167 local jurisdictions in Korea for the employment growth in industries, and is mainly placed in a spatial econometric setting. The results of analysis are as follows : The competitive share of manufacturing has the effect of increasing annual population growth rate whereas that of construction has a negative effect on the population growth rate. As well, the competitive shares of manufacturing and of construction negatively influence average annual per capita income while that of community, social and personal services positively affects the income.

• Korean journal of food and cookery science
• /
• v.19 no.4
• /
• pp.454-462
• /
• 2003

Recently, the HACCP(Hazard Analysis Critical Control Point) system has been emphasized in food processing industries throughout the world. However, the system has, as yet, not been applied very well to domestic food industries. Due to the increase in the consumption of bakery products, more studies are required on the application of HACCP to establish the system in small-scale bakeries. This study was designed to provide basic data for setting management standards for HACCP, based on microbiological hazard evaluations of bakery products. Red bean paste filled breads, custard cream filled breads and cakes covered with fresh whipping cream were collected, and microbiological evaluations conducted on the raw materials, the manufacturing processes and potential hazards. The result showed the presence of coliforms in fresh cream of cakes and the soybean paste of soybean paste breads at levels as high as 105 CFU/g on the hazard analysis of the raw materials. Moreover, the general levels of bacteria and coliforms were over those of the standards during the intermediate fermentation and molding processes. Furthermore, high levels of coliforms were detected on the hands of the salesmen and bakers themselves. This suggests that the CCPs (Critical Control Points), such as fresh cream and red bean paste manufacturing process desperately require better management. There is also a requirement for education relating to personal hygiene for the production of hygienic bakery products and for the publics health.

• Journal of Food Hygiene and Safety
• /
• v.36 no.6
• /
• pp.493-503
• /
• 2021

The study was designed to analyze raw and auxiliary materials of Korean traditional cookies such as Yugwa and Gangjeong, equipment and tools, personal hygiene of workers and microbial contamination of materials by each manufacturing process. In addition, it looked at washing method for reducing microorganisms at the site and reduction effect of microorganisms by frequency in the manufacturing processes of Yugwa. In the process of producing Korean traditional cookies, the level of total aerobic bacteria (TAB) in popped rice was 1.2 Log CFU/g and the level of TAB in finished products increased to 3.7 Log CFU/g. In the process of producing Yugwa, the level of TAB increased to a maximum of 6.5 Log CFU/g in the soaking process but decreased to 1.3 Log CFU/g in the frying process. However, the level of TAB increased again to 1.3 Log CFU/g in finished products that proves its recontamination. It is estimated that he manufacturing process causes cross-contamination that comes from the work tools, equipment or workers. In particular, the spatula, one of the work tools, was found to have 4.4 Log CFU/g of aerobic bacteria and 4.2 Log CFU/g of colon bacillus that show they are highly contaminated. In the soaking process of Yugwa that lasts seven days, the level of TAB was a maximum of 10 Log CFU/g and the level of total colon bacillus was 6.8 Log CFU/g. When compared with washing methods, using hands and tools or running water, it is confirmed that the level of both TAB and total colon bacillus decreased to 5.0 Log CFU/g and 2.8 Log CFU/g respectively when hands were washed with running water 10 times. The above result shows that it's required for workers to wash their hands as well as wash and disinfect work tools and equipment in the process of producing Korean traditional cookies at small-scale companies. In addition, to reduce the level of microbial contamination in finished products, workers are required to apply their reduction method at the site.

• IE interfaces
• /
• v.25 no.1
• /
• pp.21-30
• /
• 2012

In the past, buyers and suppliers met each other to find common interests off-line in exhibitions and conferences, or through personal connection. These activities were time consuming and costly. With the advent of information era, these activities moved to online market places, where buyers search for suppliers with a set of keywords that are believed to be representative of their requirements. Its fundamental assumption is that all the potential candidates are registered in a certain database. However, recently buyers want to diversify suppliers due to needs of cost competitiveness or frequent new product development. To this end, instead of choosing suppliers from the supplier pool, discovering suppliers from all over the world should be emphasized. In order to enable buyers to describe their requirements and suppliers to capture their manufacturing capabilities via online market places, the semantic differences of terms between buyers and suppliers should be resolved. The paper summarizes various supplier discovery frameworks and prototype systems, which can be employed to expose domestic small-medium enterprises into global buyers in the near future.

• Journal of Information Technology Applications and Management
• /
• v.27 no.1
• /
• pp.75-95
• /
• 2020

Smart Factory is the decisive factor of the Fourth Industrial Revolution and is a key field for national competitiveness. Until now, most smart factory research has focused on policy and technology. In order to spread more technology, it is necessary to study what factors influence the adoption of smart factory technology in the enterprise. Nevertheless, little research has been done. In this study, based on the UTAUT (Unified Theory of Acceptance and Use of Technology), which has been proved through many years of research, I have studied the factors that influence the acceptance of smart factory technology. As a result of research, performance expectancy, social influence, and facilitating conditions of UTAUT model had a positive(+) effect on behavior intention. Their relationship of influence was in the order of performance expectancy (β = .459)> facilitating conditions (β = .212)> social influence (β = .210). However, it was found that the effort expectancy did not affect the behavior intention, and the impact of the newly perceived risk on the behavior intention to use was not confirmed. The main reason is that the acceptance of smart factory technology is not a matter of personal interest but a matter of organizational choice. Trust, on the other hand, was found to be partially mediated between performance expectancy, facilitating conditions, social influence and behavior intention. For many years, many researchers have validated the UTAUT, which has been validated through various empirical studies. It is academically meaningful to begin the study of factors affecting the acceptance of smart factory technology in terms of the UTAUT. In practice, it is necessary to provide SME employees with more information related to the introduction of smart factories, to provide advanced services related to the establishment of smart factories, and to establish a standardized model for each industry.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.12
• /
• pp.230-238
• /
• 1999

This paper describes a research work of developing computer-aided design of lead frame, semiconductor, with blanking operation which is very precise for progressive working. Approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. This system has been written in AutoLISP on the AutoCAD using a personal computer and in I-DEAS Drafting Programming Language on the I-DEAS Master Series Drafting with Workstation, HP9000/715(64) and tool kit on the ESPRIT. Transference of data among AutoCAD, I-DEAS Master Series Drafting, and ESPRIT is accomplished by DXF(drawing exchange format) and IGES(initial graphics exchange specification) methods. This system is composed of six modules, which are input and shape treatment, production feasibility check, strip-layout, die-layout, modelling, and post-processor modules. The system can design process planning and Die design considering several factors and generate NC data automatically according to drawings of die-layout module. As forming process of high precision product and die design system using 2-D geometry recognition are integrated with technology of process planning, die design, and CAE analysis, standardization of die part in die design and process planning of high pression product for semiconductor lead frame is possible to set. Results carried out in each module will provide efficiencies to the designer and the manufacturer of lead frame, semiconductor.

• Resources Recycling
• /
• v.24 no.1
• /
• pp.43-50
• /
• 2015

An extensive literature survey and personal communication with relevant experts made it possible to understand economic and technical feasibility of disposable diaper recycling. Commercial level of soiled diaper recycling technology is currently available from a Dutch company, Knowaste Co., who owns a proprietary separation technology of the pulps, plastics and super absorbing polymer (SAP). In Korea, on the other hand, pre-consumer diaper recycling technology without material separation at its infancy converts manufacturing scraps into refuse plastic fuel (RPF), container/truck cargo boards or automobile boards/sheets. Although previous studies on feasibility of post-consumer recycling in Korea showed mutually contradictory implication, it was found out in this research that significantly positive economic feasibility can be obtained with pre-consumer diaper recycling. Subsequent recycling R&D including pre-consumer scrap and policy support may expedite 'Establishment of Sustainable Society.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.822-831
• /
• 2011

This study was to examine factors related to depression of female labor workers. In order to identify health promotion strategies and intervention program to reduce depression of female labor workers. The participants were 176 female workers of manufacturing industries. Data were collected using a structured questionnaire that consisted of personal characteristics, duty related, work related characteristics and depression. Using a SPSS/WIN 17.0 Program, descriptive statistics, $x^2$-test, ANOVA and Stepwise Multiple Regression procedures were employed. As follows on the results; In Correlation analysis, work intensity, work concentration, vibration, work difficulty and job stress were positively correlated with depression. In multiple Regression, work intensity and work difficulty were significantly explained by depression. Given the findings, Do nevertheless support the need to develop effective depression intervention programs to reduce factors which work related condition and depression.

• International Commerce and Information Review
• /
• v.11 no.2
• /
• pp.149-172
• /
• 2009

Service industries nowadays have become the subject of a scientific research. However, unlike research on manufacturing, there has not yet been a broader presentation of important aspects theoretically and methodologically. The importance of service sector in both national and global economies has grown significantly. An active participation of service industries in the internationalization process, notably by licensing and FDI, has occurred over time. But a few sub-sectors still dominate on this process, for example, financial institutions such as banks, securities, and insurance as well as producer services in advertising and accounting. On the other hand, personal services that are owned by small- and medium- sized firm have limited capabilities in their transnational transfer. This paper attempts to examine various factors influencing decisions for these small- and medium- sized Korean beauty firms in entering to the foreign markets. Determining factors for these firms in the engagement of internationalization depends largely on competitive advantages in both domestic and host countries, and they may be different from those in the sub-sectors mentioned above. Based on previous researches, i identified three categories of independent variables(characteristics of firms, managers, and competition) that can influence decisions to enter to the foreign markets. Seven hypotheses have been tested by using a sample of beauty firms in Daegu city and Kyungbuk province. The results show that the intention of these firms to enter to the foreign markets is significantly influenced by the factors of the innovative character of CEO's, the competitiveness of firms, and size of firms.

• Journal of Korean Public Health Nursing
• /
• v.17 no.2
• /
• pp.266-277
• /
• 2003

In order to investigate the working conditions related to cumulative trauma disorder(CTD) and symptoms of CTD, a survey was conducted covering 305 employees who were working in three furniture manufacturing companies in Kyungin area. Data were collected by using questionnaire of the Personal Ergonomics Profiles. The results were as follows : 1. The mean score of working conditions related to CTD was 0.95. The mean score of working conditions for labor workers were significantly higher than that of clerical workers. Among 4 factors of working conditions, the higher score were shown in the working and environment factors with 1.22 and 1.18, respectively. 2. Symptom prevalence rate of CTD for workers was $81.0\%\;{;}\;82.9\%$ for labor workers and $77.0\%$ for clerical workers. As for symptom of CTD in body part, higher rate were shown in lower back with $50.2\%$, shoulder and neck with $38.4\%\;and\;36.4\%$ respectively. 3. The score of symptom severity of CTD were 3.45. Significant difference was shown in symptom severity of forearm and wrist/hand part between labor and clerical workers. As for symptom severity of CTD in body part the higher score were shown in shoulder, ankle/foot, forearm. lower leg and elbow. and the highest score for labor workers were shoulder and ankle/foot and for clerical workers was lower back. 4. As a whole, symptom of CTD for workers positively correlated to working conditions. 5. Symptom of CTD for workers seemed to be significantly influenced by working factor, sex, working duration and working area factor.