• 대한환경공학회지
• /
• 제22권1호
• /
• pp.169-178
• /
• 2000

알루미나 상에 페롭스카이트 산화물 촉매를 구연산 용액에서 제조하였다. 고온 배가스 처리에 페롭스카이트 촉매의 적용가능성을 평가하기 위해 충진 촉매 반응기내에서 조업온도와 $CO/NO_x$ 몰비를 변화시키면서 CO에 의한 $NO_x$의 환원특성을 실험하였다. 본 연구에서 제조한 촉매를 분석한 결과 알루미나 상에 $La_{0.5}Sr_{0.5}CoO_3$, $SrAl_{12}O_{19}$, $LaAl_{11}O_{18}$의 복합산화물이 균일하게 분포되어 있음을 확인하였다. $CO/NO_x$ 몰비가 1보다 높은 조건에서 $NO_x$의 전환율은 온도가 높아짐에 따라 $700^{\circ}C$ 근방까지는 급격히 증가하였고, 그 이상에서는 100%에 근접하였다. 또한 조업온도 $800^{\circ}C$, 공간속도 $10700hr^{-1}$에서 23시간 연속조업한 결과 $NO_x$의 전환율은 98% 이상으로 유지됨을 확인할 수 있었다.

• The Korean Journal of Ceramics
• /
• 제6권2호
• /
• pp.177-182
• /
• 2000

At the porous $La_{0.6}Ca_{0.4}MnO_{3-{\delta}}$(LCM)/YSZ electrodes of solid oxide fuel cells (SOFC), the electrochemical redox reaction of oxygen proceeds via the triple boundary (TPB) of gas/LCM/YSZ. The surface diffusion of adsorbed oxygen on LCM has been proposed as the rate determining process, assuming the gradient of oxygen chemical potential from the outer surface of porous layer to TPB. Along with the formation of this gradient, oxygen nonstoichiometry in the bulk of LCM may varies. In this paper, an electrochemical technique was described precisely to determine the variation of oxygen content in LCM of porous LCM/YSZ under polarization. It was shown that the oxygen potential in LCM layer under large cathodic polarization is much lower than that in the gas phase, being determined from the electrode potential and Nernst equation.

• Transactions on Electrical and Electronic Materials
• /
• 제15권4호
• /
• pp.226-229
• /
• 2014

In this study, lead-free $(Ba_{0.85}Ca_{0.15})(Ti_{1-x}Zr_x)O_3$ ceramics and a bimorph-type piezoelectric actuator were fabricated using the normal oxide-mixed sintering method, and their dielectric properties, microstructure, and displacement properties were investigated. From the results of X-ray diffraction, the pattern of the specimen has a pure perovskite structure. In addition, no secondary impurity phases were found. The excellent piezoelectric coefficient of $d_{33}=454pC/N$, the electromechanical coupling factor $k_p=0.51$, the dielectric constant ${\varepsilon}_r=3,657$, the mechanical quality factor $Q_m=239$, and $T_c$(Tetragonal-Cubic) =$90^{\circ}C$ were shown at x= 0.085. ${\Delta}k_p/k_p20^{\circ}C$ and ${\Delta}f_r/f_r20^{\circ}C$ showed the maximum value of -0.255 and 0.111 at $-20^{\circ}C$ and $80^{\circ}C$, respectively. The maximum total-displacement was $60{\mu}m$ under the input voltage of 50 V. As a result, it is considered that lead-free $(Ba_{0.85}Ca_{0.15})(Ti_{1-x}Zr_x)O_3$ ceramics is a promising candidate for piezoelectric actuator application for x= 0.085.

• 한국세라믹학회지
• /
• 제31권11호
• /
• pp.1315-1322
• /
• 1994

In this study, stable PbTiO3 coating solution was prepared using diethanolamine(DEA) complexing agent and deposited on indium-tin oxide(ITO) coated glass substrate. Prepared thin films were dense and crack-free. Perovskite-type PbTiO3 thin films could be obtained above 50$0^{\circ}C$, while the films heat-treated above $650^{\circ}C$ showed undesired properties due to interface reactions between films and substrates and warpage phenomena of substrates. Measured maximum dielectric constant and loss tangent were found to be 144 and 0.0163 at 1 kHz, 55$0^{\circ}C$ heat-treatment, respectively.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.593-598
• /
• 1996

Previously, in trying to prepare perovskite type oxide powders by microwave heating, we found out a non-equilibrium argon plasma is generated around the powders and discharge continues stable at atmospheric pressure. In this study, we tried the plasma decomposition of heat-stable higher organic compound such as palmitic acid which is the principal constituent of the fimger fats. It was proved that suitable amount of coexistence of oxygen radicals into the argon flow accelerates the decomposition of palmitic acid. The argon-oxygen mixed gas plasma was able to perform a complete elimination of higher organic compound.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1112-1113
• /
• 2006

The perovskite- type oxide $(ABO_3)$ containing transition metals on the B-site show mixed (electronic/ionic) conductivity. These mixed-conductivity oxides are promising materials for oxygen permeating membranes. The main objective of this research work is to synthesize and characterization ceramic powders of the Sr-Co-Fe-O system for methane conversion using membrane reactor. SCFO powders were synthesized from the route was based on the complex method of combination of acid EDTA and citrate and shown be available by control efficient of synthesis to performed $SrCo_{0.8}Fe_{0.2}O_{3-\delta$, moreover, it presented easy implementation, reproducibility and operation. Powder ceramic was characterized by XRD, microscopic optic, SEM and TG-DTA.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.258-292
• /
• 1996

In the last year great interest appears to YBCO thin films preparation on different substrate materials. Preparation of epitaxial film is a very difficult problem. There are many requirements to substrate materials that must be fullfilled. Main problems are lattice mismatch (misfit) and similarity of structure. From paper [1] or follows that difference in interatomic distances and angles of substrate and film is mire important problem than similarity of structure. In this work we present interatomic distances and angle relations between substrate materials belonging to ABCO4 group (where A-Sr or Ca, B-rare earth element, C-Al or Ga) of different orientations and YBCO thin films. There are many materials used as substrates for HTsC thin films. ABCO4 group of compounds is characterized by small dielectric constants (it is necessary for microwave applications of HTsC films), absence of twins and small misfit [2]. There most interesting compounds CaNdAlO4, SrLaAlO4 and SrLaGaO4 were investigated. All these compounds are of pseudo-perovskite structure with space group 14/mmm. This structure is very similar to structure of YBCO. SLG substrate has the lowest misfit (0.3%) and dielectric constant. For preparation of then films of substrates of this group of compound plane of <100> orientation are mainly used. Good quality films of <001> orientations are obtained [3]. In this case not only a-a misfit play role, but c-3b misfit is very important too. Sometimes, for preparation of thin films substrates of <001> and <110> orientations were manufactured [3]. Different misfits for different YBCO faces have been analyzed. It has been found that the mismatching factor for (100) face is very similar to that for (001) face so there is possibility of preparation of thin films on both orientations. SrLaAlO4(SLA) and SrLaGaO4(SLG) crystals of general formula ABCO4 have been grown by the Czochralski method. The quality of SLA and SLG crystals strongly depends on axial gradient of temperature and growth and rotation rates. High quality crystals were obtained at axial gradient of temperature near crystal-melt interface lower than 50℃/cm, growth rate 1-3 mm/h and the rotation rate changing from 10-20pm[4]. Strong anisotropy in morphology of SLA and SLG single crystals grown by the Czochralski method is clearly visible. On the basics of our considerations for ABCO4 type of the tetragonal crystals there can appear {001}, {101}, and {110} faces for ionic type model [5]. Morphology of these crystals depend on ionic-covalent character of bonding and crystal growth parameters. Point defects are observed in crystals and they are reflected in color changes (colorless, yellow, green). Point defects are detected in directions perpendicular to oxide planes and are connected with instability of oxygen position in lattice. To investigate facets formations crystals were doped with Cr3+, Er3+, Pr3+, Ba2+. Chromium greater size ion which is substituted for Al3+ clearly induces faceting. There appear easy {110} faces and SLA crystals crack even then the amount of Cr is below 0.3at.% SLG single crystals are not so sensitive to the content of chromium ions. It was also found that if {110} face appears at the beginning of growth process the crystal changes its color on the plane {110} but it happens only on the shoulder part. The projection of {110} face has a great amount of oxygen positions which can be easy defected. Pure and doped SLA and SLG crystals measured by EPR in the<110> direction show more intensive lines than in other directions which allows to suggest that the amount of oxygen defects on the {110} plane is higher. In order to find the origin of colors and their relation with the crystal stability, a set of SLA and SLG crystals were investigated using optical spectroscopy. The colored samples exhibit an absorption band stretching from the UV absorption edge of the crystal, from about 240 nm to about 550 m. In the case of colorless sample, the absorption spectrum consists of a relatively weak band in the UV region. The spectral position and intensities of absorption bands of SLA are typical for imperfection similar to color centers which may be created in most of oxide crystals by UV and X-radiation. It is pointed out that crystal growth process of polycomponent oxide crystals by Czochralski method depends on the preparation of melt and its stoichiometry, orientation of seed, gradient of temperature at crystal-melt interface, parameters of growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth. Growth parameters have an influence on the morphology of crystal-melt interface, type and concentration of defects.

• 한국결정성장학회지
• /
• 제23권1호
• /
• pp.14-19
• /
• 2013

본 연구팀에서는 층상형 페로브스카이트 구조를 갖는 Ruddlesden-Popper 구조의 $K_2La_2Ti_3O_{10}$의 박리화를 통해 Aurivillius 구조의 $Bi_{4-x}La_xTi_3O_{12}$(x~2) 페로브스카이트 산화물을 성공적으로 합성하였다. 박리화된 란타늄 티타네이트 나노시트는 BiOCl 나노결정구조와 반응시켜 $Bi_{4-x}La_xTi_3O_{12}$(x~2) 결정을 얻어내었다. 박리화된 나노시트 현탁액은 $K_2La_2Ti_3O_{10}$으로부터 수소화된 $H_2La_2Ti_3O_{10}$의 층간에 에틸아민을 삽입시킴으로써 얻어내었다. 투과전자현미경(TEM) 분석을 통해, 란타늄 티타네이트가 에틸아민에 의해 박리화된 것을 확인할 수 있었다. X-선 회절분석(XRD)을 통해, 박리화된 란타늄 티타네이트와 BiOCl의 재적층과정을 거쳐 $700^{\circ}C$ 이상의 열처리 조건에서 $Bi_{4-x}La_xTi_3O_{12}$(x~2)로 형성된 것을 확인할 수 있었다.

• 한국재료학회지
• /
• 제11권11호
• /
• pp.997-1000
• /
• 2001

Conducting perovskite oxide, $(Ba,Sr)RuO_3(BSR)$, which has many advantages for $(Ba,Sr)TiO_3(BST)$ due to their similarity in crystal structure, lattice constant and chemical composition, was prepared on n-type Si (100) by liquid delivery metalorganic chemical vapor deposition(LDMOCVD). The deposition characteristics of BSR were controlled by gas-phase mass-transfer in the experiment. The BSR films deposited at 50$0^{\circ}C$ and oxygen flow rate of 100 sccm(standard cc/min) showed an average roughness of 22 $\AA$and resistivity of 810 $\mu$$\Omega$-cm. The roughness of BSR films with oxygen flow rate showed a close relationship with the resistivity of films. BSR (110) peak shifted toward lower Bragg angle with increase of x in the$(Ba_x,Sr_{1-x})TiO_3$. The resistivity of BSR films increased from 810 to 924 $\mu$$\Omega$-cm with increase of Ba content(x).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1453-1455
• /
• 1998

$Ba(Mg,Ta)O_3-Ba(Co,Nb)O_3$ ceramics were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of 1500-$1575^{\circ}C$ for 5[hr.] in air. The crystal structure was investigated by the XRD. The microstructure of the ceramics were observed by SEM. The microwave properties of dielectric resonators were investigated as a function of composition and sintering temperature. $Ba(Mg,Ta)O_3-Ba(Co,Nb)O_3$ ceramics have a structure of complex perovskite type, and have peaks of (101),(102),(201),(202) and (212). In the case of the $0.7Ba(Mg,Ta)O_3-0.3Ba(Co,Nb)O_3$ ceramic resonator, dielectric constant, quality factor and temperature coefficient of resonant frequency(TCRF, ${\tau}_l$) were a good value of 26.5, 11.500 at 10[GHz] and -1.3[ppm/$^{\circ}C$] from $25^{\circ}C$ to $60^{\circ}C$, respectively.