• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.7-12
• /
• 2012

The cutting force for peripheral end-milling considering run-out property was estimated and its result was compared with that of measured one. An experimental coefficient modelling was used for the formulation of theoretical end-milling force by considering the specific cutting force coefficient. Also, the specific cutting force, that is the multiplication of specific cutting force coefficient and uncut chip thickness, was used for the prediction of end-milling force. The end-milling force mechanics with run-out was presented for the estimation of theoretical force in peripheral end-milling by considering the geometric shape of the workpiece part. As a result, the estimated end-milling force shows a good consistency with the measured one. And it can be used for the prediction of force history in end-milling with run-out which incurs different start and exit immersion angle in entering and exiting condition.

• 한국생산제조학회지
• /
• 제5권2호
• /
• pp.63-72
• /
• 1996

In order to regulate the cutting force at a desired level during peripheral end milling processes a feedrate override Adaptive Control Constraint (ACC) system was developed. The feedrate override function was accomplished through a development of programmable machine controller (PMC) interface technique on the NC controller, Nonlinear model of the cutting process was linearized as an adaptive model with a time varying process parameter. An integral type estimator was introduced for on-line estimation of the cutting process parameter, Zero order hold digital control methodology which uses pole-assignment concept for tuning of PI controllers was applied for the ACC system. Performance of the ACC system wsa confirmed on the vertical machining center equipped with fanuc OMC through a large amount of experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1407-1410
• /
• 1997

Advanced sensor design and filtering technology have been studied to obtain information for condition monitoring and diagnostics inmachining processes. To develope and economic monitoring system in end milling processes, indirect and reliable type of cutting force estimators were required. In this paper, an estimation method of cutting forces during end milling processes was studied through the measurement of current signals obtained from spindle and feeddrive motors. Cutting force and torque models were derived from the cutting geometry in down milling processes. Relationships between motor currents and cutting forces were also developed in the form of AC and DC components from the developed force models. The validity of the cutting force estimator was confirmed by the experiments under various cutting conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.321-327
• /
• 1993

In order to maintain the cutting force at a desired level during peripheral end milling processes in spite of variation of the depth of cut and other machining conditions, a feedrate override. Apaptive Control Constraint (ACC) system are developed. Feedrate override was accomplished by a developed MMC board and PMC interface techniques. Nonlinear model of the cutting process was linearized as an adaptive model with time varying paramrters. Integral type estimators were introduced for on-line identification of cutting and control parameters in peripheral and milling processes. Zero Order Jold (ZOH) type degital control methodology which uses pole-placement concepts was applied for the ACC system. Performance of the developed ACC system was confirmed on the vertical machining center equipped with FANUC OMC for a large amount of experiment

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.2048-2061
• /
• 1991

본 연구에서는 이와 같은 구비조건과 문제점들을 해소하기 위하여 Fig.1과 같 이 볼 엔드 밀링의 절삭성과 경제적 절삭 속도식을 실용식의 형태로 표현하여 절삭조 건의 최적화를 위한 구속조건으로 설정하였고, 이를 자유곡면의 절삭경로 산출과정에 서 구속조건을 만족하면서 부품당의 생산비를 최소로 하는 스핀들속도와 이송속도를 결정하는 데에 적용하였다. 그리고 이는 실험모형에의 적용예를 통해 계산시간과 정 확도 및 절삭효과 등에 있어서 실용화의 가능성을 검토하였다. 이때 절삭력계를 해 석 함에 있어서는 기하학적 절삭 파라미터들에 대해 무차원적으로 정의된 절삭작용 누 적계수(accumulating coefficient)들을 이용하여 절삭력계를 선형화 된 실용식으로 표 현하였으며, 절삭 상수들과 절삭작용 누적계수들의 선형적 표현에 의해 평균 절삭력계 를 계산한 후, 토크 패턴 모델에 의해 절삭력 집중비를 구함으로써 실 절삭계의 주변 력(peripheral force), 드러스트, 토크, 동력 등을 예측하였다. 또한 절삭속도의 결 정에 있어서는 경제적 절삭속도 예측모델을 설정하여 가공비를 최소로 하는 절삭속도 를 선정토록 하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.690-694
• /
• 1996

In order to regulate the cutting force at a desired level during peripheral end milling processes, a feedrate override Adaptive Control Constant system was developed. This paper presents an explicit pole-assignment PI-control law through spindle motor current monitoring and its application to cutting force regulation for feedrate optimization. An experimental set-up is constructed for the commercial CNC machining center without any major changes of the structure. A data transfer system is constructed with standard interface between an IBM compatible PC and a CNC of the machining center. Experimental results show the validity of the system.