Browse > Article

An Analysis of the Cutting Force for Peripheral End-milling Considering Run-out  

Kim, Jong-Do (부경대학교 기계자동차공학과)
Yoon, Moon-Chul (부경대학교 기계자동차공학과)
Kim, Byung-Tak (부경대학교 기계자동차공학과)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.11, no.4, 2012 , pp. 7-12 More about this Journal
Abstract
The cutting force for peripheral end-milling considering run-out property was estimated and its result was compared with that of measured one. An experimental coefficient modelling was used for the formulation of theoretical end-milling force by considering the specific cutting force coefficient. Also, the specific cutting force, that is the multiplication of specific cutting force coefficient and uncut chip thickness, was used for the prediction of end-milling force. The end-milling force mechanics with run-out was presented for the estimation of theoretical force in peripheral end-milling by considering the geometric shape of the workpiece part. As a result, the estimated end-milling force shows a good consistency with the measured one. And it can be used for the prediction of force history in end-milling with run-out which incurs different start and exit immersion angle in entering and exiting condition.
Keywords
End-milling Force; Chip Thickness; Immersion Angle; Run-out; Specific Cutting Force;
Citations & Related Records
연도 인용수 순위
  • Reference
1 S. S. Lee and H. S. Kim, "Development of mechanistic model for cutting force prediction considering cutting tool states in face milling", KSPE, Vol. 12, No. 11, pp. 63-73, 1995.
2 M. C. Yoon and Y. G. Kim, "Cutting dynamic force modelling of end milling operation", Journal of Material Processing Technology, Vol. 155-156, pp. 1383-1389, 2004.
3 Y. M. Lee, S. H. Yang, S. I. Jang, S. K. Baek, S. I. Kim and D. S. Lee, "Effects of cutter runout on cutting forces in up-end milling of inconel 718", KSMTE, Vol. 11, No. 5, pp. 45-52, 2002.
4 H. G. Cho, J. D. Kim and M. C. Yoon, "Cutting force modelling in end-milling considering runout", KSMTE, Vol. 20, No. 3, pp. 225-231, 2011.
5 M. C. Yoon and D. H. Chin, "Cutting force monitoring in the end-milling operation for chatter detection", Journal of Eng. Manuf., Vol. 12, pp. 455-466, 2005.
6 J. S. Jeong, D. H. Chin and M. C. Yoon, "End-milling force estimation by fractal interpolation", J. of KSMPE, Vol. 5, No. 1, pp. 7-12, 2006.
7 S. Kalpakjian, Manufacturing Engineering Technology, Prentice Hall, 2001.