• Transactions on Electrical and Electronic Materials
• /
• 제17권4호
• /
• pp.217-221
• /
• 2016

In this work, open and short stubs that were fabricated on the silicon substrate and for which the periodically arrayed grounded-strip structure (PAGS) was employed were studied along with their basic RF characteristics for an applicability regarding the RF-matching components. The PAGS-employing open and short stubs showed losses that are much lower than that of the conventional stub on the silicon substrate. Concretely, the Q values of the open and short stubs are 9 and 10.2, respectively, while the Q value of the conventional open stub is 2.5. With the use of the PAGS-employing open and short stubs, a highly miniaturized harmonic-rejection filter was also fabricated on the silicon substrate. The filter exhibited a comparatively sound harmonic-suppression characteristic at n × 13 GHz, and its size is 0.1 mm², which is only 7% of the size of the conventional filter on the silicon substrate.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권6호
• /
• pp.840-845
• /
• 2010

본 논문에서는 MMIC상에서 온칩용 수동소자 제작을 위해서, 주기적으로 배치된 용량성 소자를 이용한 단파장 전송선로를 제안하였다. 제안된 PACD(periodically arrayed capacitive devices) 선로 구조는 기존의 마이크로스트립 선로에 비해 매우 짧은 선로파장 특성을 보였다. PACD 선로 구조는 주파수 5GHz에서 기존의 마이크로스트립 선로 파장의 8%의 파장단축 효과를 보였고, PPGM구조의 선로 파장의 38%의 파장단축 효과를 나타내었다. 이러한 PACD선로 구조는 MMIC상에서 온칩용 수동소자 제작에 유용한 특성으로 판단된다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.412-416
• /
• 2005

In this paper we propose low-impedance and miniaturized a wilkinson power divider on MMIC passive component which was fabricated by a novel microstrip line structure employing periodically perforated ground metal (PPGM). The novel microstrip line structure showed much lower impedance and shorter guided-wavelength than conventional one. Using the novel microstrip line with periodically perforated ground metal, a miniaturized 17 ${\Omega}$ power divider was fabricated. The line width of the power divider was 20 ${\mu}m$, and the size of it was 0.110 $mm^2$, which is 21 % of conventional one. The power divider exhibited good RF performances from 10 to 20 GHz.

• 한국전자파학회논문지
• /
• 제14권7호
• /
• pp.727-733
• /
• 2003

본 논문에서는 GaAs MMIC상의 수동소자의 소형화와 저임피던스화를 위하여, 주기적 홀을 가지는 접지금속막 선로구조를 제안하였으며, 그 결과 종래의 마이크로스트립 선로에 비해 선로의 저임피던스화와 선로파장 축소를 실현하였다. 상기 선로구조를 이용하여 CaAs기판상에 15 $\Omega$ 임피던스라인으로 MMIC용 레트레이스를 제작한 결과, 종래의 마이크로스트립 선로를 이용하여 제작한 레트레이스에 비해 선로폭은 종래의 1/40인 20 $\mu\textrm{m}$였으며, 레트레이스의 면적은 종래의 약 9.3 %인 0.375 mm$^2$이었다. 상기 레트레이스로부터 20~30 GHz 사이에서 양호한 RF특성을 관찰할 수 있었다.

• 한국광학회지
• /
• 제22권1호
• /
• pp.1-4
• /
• 2011

본 연구에서는 PR 폴리머 장주기 패턴을 이용하여 표면 식각된 격자 구조 기반 장주기 광섬유 격자 제조 방법을 제안하고 외부 장력 및 비틀림, 그리고 외부 굴절률에 대한 민감도를 측정하였다. 외부 장력을 인가함에 따라 특정파장에서 광결합 계수 변화에 의한 공진파장이 형성되고 투과도가 감소하게 된다. 손실이 생기게 되고 민감도는 $-0.033\;dB/\mu\varepsilon$로 측정되었다. 비틀림과 외부 굴절률에 변화에 대해서도 표면 식각된 격자 구조 기반 장주기 광섬유 격자의 투과 특성이 변하며 민감도는 각각 -1.30 nm m/rad, -31.33 nm/RIU로 측정되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권2호
• /
• pp.330-335
• /
• 2008

In this study, highly miniaturized short-wavelength transmission line employing periodically perforated ground metal (PPGM) structures were developed for application to miniaturized on-chip passive component on Si RFIC. The transmission line employing PPGM structure showed shorter wavelength and lower characteristic impedance than conventional coplanar-type transmission line. The wavelength of the transmission line employing PPGM structure was 57% of the conventional coplanar-type transmission line on Si Radio Frequency Integrated Circuit (RFIC) substrate. Basic characteristics of the transmission line employing PPGM structure were also investigated in order to evaluate its suitability for application to a development of miniaturized passive on-chip components. According to the results, it was found that the PPGM structure is a promising candidate for application to a development of miniaturized on-chip passive components on Si RFIC.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권1호
• /
• pp.52-57
• /
• 2015

본 논문에서는 MMIC(Monolithic microwave integrated circuit) 상에서 초소형 무선 통신 시스템에서의 응용을 위해 반전된 형태의 주기적으로 배치된 용량성 소자를 이용한 전송선로(IPACD, Inverted Periodically Arrayed Capacitive Devices)의 RF 특성을 연구하였다. 측정 결과, 본 논문에서 제안하는 반전된 형태의 주기적으로 배치된 용량성 소자를 이용한 전송선로는 기존의 마이크로스트립 전송선로는 선로파장의 11.85%로 단파장의 성능을 보였고, 전파상수, 유효 유전율은 기존의 전송선로에 비하여 훨씬 높은 결과를 보여주었다. PACD(periodically arrayed capacitive devices) 선로구조에 비해 삽입손실이 1~10 GHz에서 22.6%정도 개선되었다. 또한 IPACD 선로구조의 등가회로를 closed-form 방정식을 통하여 이론적으로 해석하였으며, 실질적인 대역폭의 의미를 가지는 1차 통과대역에서의 차단 주파수는 129.2 GHz로 나타나 광대역의 특성을 보여주었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권8호
• /
• pp.1248-1256
• /
• 2008

In this paper, basic characteristics of transmission line employing PPGM (periodically perforated ground metal) were investigated using theoretical and experimental analysis.According to the results, unlike the conventional PBG (photonic band gap) structures, the characteristic impedance of the transmission line employing PPGM structure showed a real value, which exhibited a very small dependency on frequency. The transmission line employing PPGM structure showed a loss (per quarter wave length) higher by $0.1{\sim}0.2\;dB$ than the conventional microstrip line. According to the investigation of the dependency of RF characteristic on ground condition, the RF characteristic of the transmission line employing PPGM structure was hardly affected by the ground condition in the frequency lower than Ku band, but fairly affected in the frequency higher than Ku band, which indicated that coplanar waveguide employing PPGM structure was optimal for RF characteristic and reduction of size. Considering above results, impedance transformer was developed using coplanar waveguide with PPGM structure for the first time, and good RF characteristics were observed from the impedance transformer. In case that {\lambda}/4$ impedance transformer with a center frequency of 9 GHz was fabricated for a impedance transformation from 20 to10 {\Omega}$, the line width and length were 20 and $500\;{\mu}m$, respectively, and its size was only 0.64 % of the impedance transformer fabricated with conventional microstrip lines. Above results indicate that the transmission line employing PPGM is a promising candidate for a development of matching and passive elements on MMIC.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.143-146
• /
• 2004

This study is aimed to numerically evaluate a sound absorption performance of periodically folded barriers. Based on the formulation for sound absorption of a locally reacting surface in a periodic arrangement, variations of the sound absorption with parameters such as the folded width and depth are investigated. In comparison with the sound absorption of a conventional barrier with a flat surface, it is found that the periodically folded barriers can achieve a higher sound absorption especially in the low frequency range.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.84-87
• /
• 2005

This study is aimed to compare the insertion losses of periodically folded barriers which have same folded width, depth and period of arrangement but different direction of arrangement. One is vortical to the roadside and another is parallel. The pressure levels and the insertion losses at the receiving points behind finite length barriers are measured in an anechoic room by scale model test. The measured insertion losses are compared with calculated insertion losses by 3D BEM models.