• 한국항공우주학회지
• /
• 제45권8호
• /
• pp.678-685
• /
• 2017

지구관측위성에 탑재되는 자료처리/저장장치 방열판은 장비의 주기적인 고발열, 배치, 장착성 등 설계 특성으로 인해 쉴드가 장착된 홈 형태를 갖는다. 홈 형태 방열판의 영향성과 쉴드 방열판의 열성능을 확인하기 위해, 평판 방열판을 기준으로 홈 형태의 방열판과 쉴드 방열판을 비교하여 열진공 시험을 실시하였다. 시험결과를 바탕으로 view factor에 의한 열교환과 방열판의 온도를 이론해석적으로 분석하여 열 설계 성능비교의 타당성을 입증하였다.

• 산업경영시스템학회지
• /
• 제42권4호
• /
• pp.116-125
• /
• 2019

The Dynamic Vehicle Routing Problem (DVRP) involves a combinatorial optimization problem where new customer demands become known over time, and old routes must be reconfigured to generate new routes while executing the current solution. We consider the high level of dynamism problem. An application of highly dynamic DVRP is the ambulance service where a patient contacts the service center, followed by an evaluation of case severity, and a visit by a practitioner/ ambulance is scheduled accordingly. This paper considers a variant of the DVRP and proposes a decentralized algorithm in which collaborators (Depot and Vehicle), both have only partial information about the entire system. The DVRP is modeled as a periodic re optimization of VRP using the proposed decentralized algorithm where collaborators exchange local information to achieve the best global objective for the current state of the system. We assume the existence of a dispatcher e.g., headquarter of the company who can communicate to vehicles in order to gather information and assigns the new visits to them. The effectiveness of the proposed decentralized coordination algorithm is further evaluated using benchmark data given in literature. The results show that the proposed method performed better than the compared algorithms which utilize the centralized coordination in 12 out of 21 benchmark problems.

• 대한기계학회논문집B
• /
• 제23권6호
• /
• pp.769-777
• /
• 1999

This paper presents models for the dynamic simulation of a regenerative gas turbine and describes dynamic behaviors of a small regenerative engine. A quasi-steady model is introduced where the inertia of the working fluid is assumed to be negligible compared with the mechanical inertia of the rotating shaft. Based on this quasi-steady model, the transient model for the heat exchanger is employed to simulate the unsteady heat exchange in the recuperator. The effect of the thermal inertia of the recuperator metal on transient behaviors is analyzed by comparing the predicted results of the transient and steady state heat exchanger models. For several load change modes such as sudden increase, decrease and periodic variation, engine dynamic characteristics are investigated by applying a fuel control logic for the constant shaft speed. It is found that the thermal inertia of the recuperator metal has a dominant effect on the whole engine dynamic behavior.

• 제어로봇시스템학회논문지
• /
• 제18권9호
• /
• pp.854-862
• /
• 2012

The optimal design of batch-storage network by using periodic square wave model provides analytical lot sizing equations for a complex supply chain network characterized as multi-supplier, multi-product, multi-stage, non-serial, multi-customer, cyclic system including recycling and/or remanufacturing. The network structure includes multiple currency flows as well as material flows. The processes are represented by multiple feedstock/product materials with fixed composition which are very suitable for production processes. In this study, transportation processes that carry multiple materials with unknown composition are added and the time frame is changed from single period into multiple periods in order to represent nonperiodic parameter variations. The objective function of the optimization involves minimizing the opportunity costs of annualized capital investments and currency/material inventories minus the benefit to stockholders in the numeraire currency. The expressions for the Kuhn-Tucker conditions of the optimization problem are reduced to a multiperiod subproblem for average flow rates and analytical lot-sizing equations. The multiperiod lot sizing equations are different from single period ones. The effects of corporate income taxes, interest rates and exchange rates are incorporated.

• 한국정보통신학회논문지
• /
• 제12권7호
• /
• pp.1308-1313
• /
• 2008

무선 애드혹 네트워크에서 동작하는 많은 프로토콜들은 이웃 노드에 대한 정보를 중요하게 사용한다. 이웃 노드에 대한 정보는 Hello 메시지를 주고받음으로써 알 수 있다. 자신기 존재를 알리고 싶은 노드는 주기적으로 Hello 패킷을 전송한다. 하지만, 이러한 Hello 패킷의 전송은 무선 애드혹 네트워크에 큰 제어 부하로 작용하게 된다. 이 논문에서는 Hello 패킷뿐만 아니라 방송 패킷을 활용하여 이웃 노드 정보를 주고받는 방법을 고찰한다. 분석과 컴퓨터 시뮬레이션을 통하여 방송 패킷을 활용하는 기법이 Hello 패킷만을 사용하는 방식에 비하여 상당한 효과를 보인다는 것을 분석한다. Hello 패킷의 전송 주기와 방송 패킷의 전송기가 같다면 42% 정도의 부하 절감 효과가 있다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권1호
• /
• pp.7-11
• /
• 2021

Cryogenic vessels are special equipment that requires periodic evaluation of their thermal insulation performance. At the current standard, the test is considered as the loss product or heat leakage of cryogenic vessel, which takes over 72 h to evaluate; consequently, a large amount of working medium is discharged to the environment in the process. However, hydrogen is flammable and explosive, and the discharged gas may be dangerous. If liquid hydrogen is replaced with liquid nitrogen before testing, the operation then becomes complicated, and the loss product or heat leakage cannot respond to the thermal insulation performance of cryogenic vessels for liquid hydrogen. Therefore, a novel method is proposed to evaluate the heat leakage of cryogenic vessels for liquid hydrogen in self-pressurization. In contrast to the current testing methods, the method proposed in this study does not require discharge or exchange of working medium in all test processes. The proposed method is based on one-dimensional heat transfer analysis of cryogenic vessels, which is verified by experiment. When this method is used to predict the heat leakage, the comparison with the experimental data of the standard method shows that the maximum error of heat leakage is less than 5.0%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권2호
• /
• pp.511-527
• /
• 2024

This paper proposes a block-based self-organizing time-division multiple access (BSO-TDMA) protocol for very high frequency (VHF) data exchange system (VDES) in shipborne ad-hoc networks (SANETs). The BSO-TDMA reduces the collisions caused by the simultaneous transmission of automatic identification system (AIS) messages by uniformly allocating channel resources using a block-wise frame. For this purpose, the BSO-TDMA includes two functional operations: (1) frame configuration and (2) slot allocation. The first operation consists of block division and block selection. A frame is divided into multiple blocks, each consisting of fixed-size subblocks, by using the reporting interval (RI) of the ship. Then, the ship selects one of the subblocks within a block by considering the number of occupied slots for each subblock. The second operation allocates the slots within the selected subblock for transmitting AIS messages. First, one of the unoccupied slots within the selected subblock is allocated for the periodic transmission of position reports. Next, to transmit various types of AIS messages, an unoccupied slot is randomly selected from candidate slots located around the previously allocated slot. Experimental simulations are conducted to evaluate the performance of BSO-TDMA. The results show that BSO-TDMA has better performance than that of the existing SOTDMA.

• 한국통신학회논문지
• /
• 제39B권11호
• /
• pp.730-742
• /
• 2014

인지무선 애드혹 네트워크(Cognitive Radio Ad-hoc Networks)에서 요구기반 라우팅을 수행할 경우, 경로 탐색 과정에서 발생하는 경로탐색 메시지의 브로드캐스팅은 공통 제어 채널의 과부하를 유발하고 패킷 간의 충돌을 발생시킨다. 이런 현상은 경로탐색의 오버헤드를 증가 시키며, 정확하고 신뢰성있는 경로의 탐색에 제한을 받게 된다. 이로 인하여 신뢰성있는 채널을 찾는 경로가 제한되기 때문에 경로의 생존 시간이 단축되고 경로의 안정성이 감소된다. 본 논문에서는 인지무선 ad-hoc네트워크에서 주사용자의 출현 가능성과 주변 사용자의 상황을 고려하여 패킷 충돌을 감소시키고 경로의 생존시간을 향상 시키는 라우팅 알고리즘을 제안한다. 각 노드는 주기적인 센싱을 통해 주사용자의 사용패턴을 감지하고 채널의 사용 확률과 현재 채널 상태를 알고 있다. 또한 이웃 노드와 메시지 교환을 통해 공통된 채널과 해당 채널의 품질을 파악하여 노드 사이에 링크 레벨을 부여한다. 제안된 방법에서는 링크 레벨을 이용하여 경로 탐색 과정에서 발생하는 제어 메시지의 수를 감소시킨다. 또한 링크의 생존성과 품질을 홉 카운트에 따라 가중치를 부여하여 경로를 선택함으로써 경로의 생존 시간을 향상 시킬 수 있다. 성능 평가를 통해 기존의 방법 보다 제안된 방법을 이용하여 라우팅을 수행할 경우 제어 채널의 오버헤드가 감소되고 경로의 생존시간이 증가하는 것을 확인 할 수 있다.

• 대한치과보철학회지
• /
• 제42권6호
• /
• pp.628-640
• /
• 2004

Statement of problem. Wear as a result of repeated closing/opening cycles may decrease the friction coefficient of screw head, threads, and other mating components and, consequently, resistance to opening gradually decreases. It may cause screw loosening, which is one of the most common failures in implant prosthesis. Purpose. The purpose of this study is to evaluate the changes on the head and thread surface of the abutment screws after repeated closing and opening through the examination of tested screws in SEM(scanning electron microscope). Materials and methods. Five species of abutments were selected (3i-three, Avana-two) respectively by two pieces. The implant fixtures were perpendicularly mounted in liquid unsaturated polyesther(Epovia, Cray Valley Inc.) with dental surveyor. Each abutment was secured to the implant fixture by each abutment screw with recommended torque value using a digital torque controller. The abutment screws were repeatedly tightened and removed 20 times with a digital controller. FESEM (field emission scanning electron microscope, Netherland, Phillips co., model:XL 30 SFEG) was used to observe changes of each part caused by repeatedly closing/opening expeiment. First, the Photomicrographs of pre-test screws provided by each manufacturer were taken. The changes of each screw were investigated after every fifth closing and opening experiment with FESEM. Scaning electron microscope photomicrographs of each screw were taken four times. Results. As the number of closing and opening was increased, the wear or distortion of hexed or squared slot that contacted with the driver tip was more severely progressed. Wear or distortion of hexed slot was more severe than that of squared slot and it was more remarkable in the titanium screw than in the gold screw. All the tested screws showed that the width in the crest of their screw thread decreased gradually as the test was proceeded. Conclusions. Conclusively, we recommend the clinical use of gold screw, a periodic exchanges of abutment screws and avoiding repeated closing/opening unnecessarily. We also suggest a more careful manipulation of the abutment screw and screw-driver and using of abutment screw with an acute-angled slot design rather than an obtuse-angled one. Finally, it is suggested that the new slot design and the surface treatment for enduring wear or distortion should be devised.

• 한국인터넷방송통신학회논문지
• /
• 제23권5호
• /
• pp.21-27
• /
• 2023

선박이 안전한 항해를 하기 위해 도움을 주는 수단으로서 해상환경에서 운용 중인 항로표지는 주기적인 관리가 필요하며 환경 특성상 정확한 상태를 육안으로 확인하기는 어려움이 존재한다. 이에 따라 항로 안전 및 운항 효율성을 향상시키는 스마트 항로표지 시스템은 일반적인 항로표지와 다르게 센서, 통신 및 정보 기술을 포함한 전문적인 기술을 활용한다. 선박 안전과 선박을 운항하는 항해자들의 안전을 지키는 것이 목적인 스마트 항로표지 시스템의 통신 환경은 해상환경에 맞게 무선 통신 네트워크를 사용하게 된다. 선박은 육상에서 해상환경에 필요한 정보들을 수집하며 운항을 하게 되는데 이 과정에서 무선 통신 보안 지침에 대한 부분도 고려해야할 필요가 존재한다. 기본적으로 데이터 교환을 용이하게 하기 위한 표준 IHO S-100과 안전한 통신을 할 수 있는 인터페이스를 제공하는 SECOM을 기반으로 본 논문에서는 해상환경에서 안전한 통신을 위한 보안체계를 연구하였다. 문서에 기반한 기본적인 보안 체계를 제시하였으며 해상환경의 무선 통신 특성상 데이터 교환에 대한 취약점도 다소 존재하였으며 비인가된 사용자가 서비스에 접근할 수 있는 취약점을 고려하여 사용자 인증에 대한 부분을 추가하였다.