• 제목/요약/키워드: Periodic Metal Strip

검색결과 5건 처리시간 0.024초

Study on the Mitigation of the Resonance due to the Power-Bus Structure using Periodic Metal-Strip Loaded Sheets

  • Kahng, Sung-Tek;Kim, Hyeong-Seok
    • Journal of Electrical Engineering and Technology
    • /
    • 제6권6호
    • /
    • pp.849-852
    • /
    • 2011
  • This paper investigates a method to tackle the resonance problems of the rectangular power-bus structure(PBS) using thin sheets loaded with periodic metal strips. The equivalent surface impedance of the proposed loading is calculated and involved in the expression of the impedance that accounts for in the PBS, in order to improve the resonance behavior of the original structure. The effects of the strips and the immediate surroundings are illustrated by a number of numerical experiments. Also the restrictions of the technique are addressed.

다중스트립결합기를 이용한 탄성표면파 빔 궤적 변환기 (Surface Acoustic Wave Track Changer Using Multistrip Coupler)

  • 안재영;황금찬;박용서
    • 한국음향학회지
    • /
    • 제3권2호
    • /
    • pp.23-29
    • /
    • 1984
  • In this paper surface acoustic wave beam track changers using symmetric multistrip coupler are designed on the basis of the perturbation theory, and its characteristics are studied. SAW beam track changers, which have the configuratio of the periodic array of metal strips, are designed with the following specifications ; the number of strips : 140, the strip period: 0.25λ, the ratios of the strip width to the period a/p: 0.5, 0.375, 0.25, respectively, and approximately consistent with the theoretical values, and also the bulk wave mode and the 2nd-order effects are suppressed by these track changers.

  • PDF

주기적인 금속 스트립 패턴을 갖는 유전체 층이 놓인 평행판 도파관내에서의 전파 특성 (Propagation Characteristic in Parallel Plate Waveguide with Dielectric Layer Having Periodic Metal Strip Pattern)

  • 조정래;김동석;이기오;류상철;박동철
    • 한국전자파학회논문지
    • /
    • 제20권1호
    • /
    • pp.45-51
    • /
    • 2009
  • 본 논문에서는 주기적인 금속 스트립 패턴을 갖는 유전체 층이 놓인 평행판 도파관내에서의 전파 특성에 대하여 기술하였다. CST사의 MWS(Microwave Studio)를 이용하여 금속 스트립 사이에 연결된 PIN 다이오드의 ON/OFF 상태를 금속 스트립의 단락/개방 상태로 각각 시뮬레이션을 하였고, X-대역 4-bit radant lens 위상변위기에 사용될 수 있는 $11.25^{\circ}$, $22.5^{\circ}$, $45^{\circ}$ 유전체 층을 설계하였다. 설계된 각 유전체 층의 위상차 시뮬레이션 결과는 $11.28^{\circ}$, $23.2^{\circ}$, $46.22^{\circ}$이었다. 또한, Agilent사의 ADS(Advanced Design System)를 이용하여 각 유전체 층에 대한 동작대역에서의 등가회로를 구현 및 시뮬레이션 하였고, MWS 시뮬레이션 결과와 비교하였다. 최종적으로 $11.25^{\circ}$, $22.5^{\circ}$, $45^{\circ}$ 유전체 층을 제작하여 중심주파수에서 각각 $9.6^{\circ}$, $22.4^{\circ}$, $43^{\circ}$의 측정된 위상차를 얻었다.

Comparative analysis of the magnetic and the transport properties of electron- and hole-doped manganite films

  • Kim, K.W.;Prokhorov, V.G.;Flis, V.S.;Park, J.S.;Eom, T.W.;Lee, Y.P.;Svetchnikov, V.L.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.226-226
    • /
    • 2010
  • Microstructure, magnetic and transport properties of as-deposited electron-doped $La_{1-x}Ce_xMnO_3$ and hole-doped $La_{1-x}Ce_xMnO_3$ films prepared by pulse laser deposition, with x = 0.1 and 0.3, have been investigated. The microstructural analysis reveals that the $La_{1-x}Ce_xMnO_3$ films have a column-like microstructure and a strip-domain phase with a periodic spacing of about 3c, which were not found for the $La_{1-x}Ce_xMnO_3$ ones. At the same time, the experimental results manifest that there is no fundamental difference in the magnetic and the transport properties between electron- and hole-doped manganite films, except the appearance of ferromagnetic response in the low-doped $La_{0.9}Ce_{0.1}MnO_3$ film at temperatures above the Curie point. The observed magnetic behavior, typical for the Griffiths-like phase, for this film is explained by the percolation mechanism of the ferromagnetic transition and by the presence of strip-domain phase which stimulates the magnetic phase separation.

  • PDF

근접 영역용 900MHz RFID 리더기 안테나에 관한 연구 (A Study on a Near-Field Reader Antenna for 900 MHz RFID)

  • 박정근;이종철
    • 한국ITS학회 논문지
    • /
    • 제11권3호
    • /
    • pp.23-30
    • /
    • 2012
  • 본 논문에서는 근접 영역에 적용할 수 있는 새로운 900 MHz RFID 리더기 안테나에 대한 연구 결과를 제안한다. 본 논문에서 제안된 안테나는 주기성을 갖는 마이크로 스트립 안테나 구조를 사용하였다. 안테나의 크기는 $313mm{\times}152mm{\times}14mm$ 이다. 안테나의 성능은 근접영역에서 균일한 전계 분포를 갖고, 안테나의 이득은 -2 dBi 이고 하트 모양의 빔 패턴을 가진다. 제안된 안테나는 리더기의 송신출력이 17 dBm에서 23 dBm까지의 범위를 보인다. 본 논문에서 제안된 안테나는 금속면 위에 태그가 선적이 될 때 태그의 금속성분으로 인한 반사전력을 최소화하고 외부로 방사되는 전력을 최소화하여 오인식을 최소화하였다.