• 한국소음진동공학회논문집
• /
• 제20권7호
• /
• pp.685-692
• /
• 2010

A hybrid mount for shipboard machinery installed on naval ships was developed. The mount is combined with a rubber mount and a piezostack actuator. The rubber mount is one of the most popular and effective passive mounts to have been applied to various vibration systems to date. The piezostack actuator is featured by a fast response time, small displacement and low power consumption. Through a series of experimental tests conducted in accordance with MIL-M-17185A(SHIPS), MIL-M-17508F(SH), and MIL-S-901D which are US military specifications related to the performance requirements of the mount, it has been confirmed that the hybrid mount shows more effective performance for use in naval ships.

• 한국위성정보통신학회논문지
• /
• 제10권4호
• /
• pp.117-127
• /
• 2015

최근 국내외에서 폭넓게 개발되어 활용되고 있는 지구관측용 위성 탑재체에 대한 개발과 연구는 영상 활용분야에서 활발하게 진행되고 있다. 또한 위성에 광학센서 및 영상 레이더 등을 장착하여 다양한 지역의 영상을 수집하고 분석함과 동시에 기반 기술들의 비약적인 발전이 이루어졌다. 국내에서 추진 중인 차세대 중형위성 개발 사업은 국내 독자기술로 탑재체를 개발할 목표에 있고 농촌진흥청, 기상청, 환경부, 국토교통부 등에서 공동으로 활용할 계획에 있다. 본 논문에서는 국내 농림업 환경에 적합한 위성 탑재체 기술사양을 제안하기 위해 위성 영상을 활용한 농림업 연구사례를 조사하여 농림업 세부 활용 분야에 따른 위성 탑재체 기술 사양을 분석하였다. 국내 위성영상 활용 전문가를 대상으로 실시한 설문 및 자문조사 결과를 바탕으로 국내외 지구관측 농림업 활용 위성의 탑재체 개발 현황, 계획 그리고 활용 등을 분석하여 독자적인 농림업 중형위성 탑재체 개발을 위한 기술사양을 제안하였다. 또한 한반도 농경지를 대상으로 위성 모의 운용실험 수행을 통해 위성 탑재체의 관측 성능을 검증하였다. 본 논문에서 제안한 결과는 향후 농림업 중형위성 탑재체 개발에 있어 적합한 사양을 제공하고 사용자들이 위성영상을 효율적으로 사용할 수 있는 방향으로서 기술적 기초 정보로 활용될 것으로 기대된다.

• 한국지열·수열에너지학회논문집
• /
• 제16권1호
• /
• pp.17-25
• /
• 2020

Ground-coupled heat pump (GCHP) systems have become an efficient alternative to conventional cooling and heating methods due to their higher energy using efficiency. Although some experimental and simulation works related to performance analysis of GCHP systems for commercial buildings have been done, relatively little has been reported on the performance evaluation of GCHP systems for school buildings. The purpose of this simulation study is to evaluate the performance of a hypothetical GCHP system for a school building in Seoul. We collected various data of building specifications and construction materials for the building and then modeled to calculate hourly building loads with SketchuUp and TRNSYS V17. In addition, we used GLD (Ground Loop Design) V2016, a GCHP system design and simulation software, to design the GCHP system for the building and to simulate temperature of circulating water in ground heat exchanger. The variation of entering source temperature (EST) into the system was calculated with different prediction time and then each result was compared. For 20 years of prediction time, EST for baseline design (Case A) based on the hourly simulation results were outranged from the design criteria.

• 한국경영과학회지
• /
• 제39권3호
• /
• pp.93-115
• /
• 2014

In collaborative product development with multiple suppliers, buyers must manage the suppliers' activities. This empirical research investigates the performance impacts of three strategies that buyers use to manage suppliers who design interdependent components. These strategies are: Instructionism (giving clear instructions to suppliers), Teaming (forming an interactive development team with suppliers), and Delegation (transferring component development responsibilities to suppliers). Data were collected through a cross-industry web-based survey of buying firms in manufacturing industries whose products require multiple, interdependent components. A path analysis utilizing 318 survey responses indicates that Instructionism has a positive effect on design quality, and Teaming has a positive effect on design quality and component innovation. The use of Delegation is not related to any of the performance indicators. The practical implication of this research for product development managers is that both Instructionism and Teaming can be effective strategies. For the purpose of assuring design quality, a buyer should give clear instructions in detailed specifications or work closely with suppliers in development teams. If competitive priority is product innovativeness, however, the buyer should work closely with its suppliers during component development processes using a Teaming strategy.

• Membrane and Water Treatment
• /
• 제6권1호
• /
• pp.15-26
• /
• 2015

The compact structure and high-quality effluent of membrane bioreactors make them well-suited for decentralized greywater reclamation. However, the occurrence of membrane fouling continues to limit their effectiveness. To address this concern, a unique membrane module configuration was developed for use in a decentralized greywater treatment system. The module featured local aeration directly below a series of inclined membrane bundles, giving the overall module a twisted appearance compared to a module with vertically orientated fibres. The intent of this design was to increase the frequency and intensity of collisions between rising air bubbles and the membrane surface. Material related to the construction of custom-fit modules is rarely communicated. Therefore, detailed design and assembly procedures were provided in this paper. The twisted module was compared to two commercially available modules with diverse specifications in order to assess the relative performance and marketability of the twisted module with respect to existing products. Contaminant removal efficiencies were determined in terms of biochemical oxygen demand, chemical oxygen demand, ammonia, total nitrogen, total phosphorus, and turbidity for each module. Membrane fouling was monitored in terms of permeate flux, transmembrane pressure, and membrane resistance. Following 168 h of operation, the twisted module configuration demonstrated competitive performance, indicating good potential for further development and commercialization.

• International Journal of Control, Automation, and Systems
• /
• 제1권1호
• /
• pp.1-10
• /
• 2003

This paper presents a high-precision magnetically levitated (maglev) stage to meet demanding motion specifications in the next-generation precision manufacturing and nanotechnology. Characterization of dynamic behaviors of such a motion stage is a crucial task. In this paper, we address the issues related to the stochastic modeling of the stage including transfer function identification, and noise/disturbance analysis and prediction. Provided are test results on precision dynamics, such as fine settling, effect of optical table oscillation, and position ripple. To deal with the dynamic coupling in the platen, we designed and implemented a multivariable linear quadratic regulator, and performed time-optimal control. We demonstrated how the performance of the current maglev stage can be improved with these analyses and experimental results. The maglev stage operates with positioning noise of 5 nm rms in $\chi$ and y, acceleration capabilities in excess of 2g(20 $m/s^2$), and closed-loop crossover frequency of 100 Hz.

• International Journal of Internet, Broadcasting and Communication
• /
• 제8권4호
• /
• pp.58-62
• /
• 2016

Shipping related services is attracting attention as a UAV (Unmanned Aerial Vehicle) application with the recent economy has been generally accepted drones. UAV of the existing military-driven logistics delivery, aerial photography, wireless Internet connection, broadcasting, disaster research, digital maps, transportation, advertising, meteorological, border surveillance, agricultural use, such as hobbies range of uses from up military are diverse and growing. The advantage of delivery drones seems to be an important feature of delivery of the goods, including labor-saving, long-distance transportation in cold weather. UAV is demanded by competitive performance development for commercialization. Privacy issues that may arise during the drone operation, ensuring marketability issues, control system, regulations, operational standards and specifications, etc. should be addressed. Development direction of Korea UAV based in current technology, regulation, and growth potential presented by deriving from the idea of 'GIF 2016 Gang-won Hackathon.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.182-183
• /
• 2006

It has been studied about the important consideration in designing and construction of the reliability assessment facilities including the combined testing system for simulating condition of acceleratedly deteriorated environment, which enable to test and evaluate the large-sized HV power apparatus without any disassembly up to transmission class in this paper. Also it is described simply about its ratings and main technical specifications and trial running of the system. To evaluate the performance characteristics against combined test condition for various power installation, especially for the polymer type insulators and kinds of bushings, brief investigation and an analysis of test objects and related international codes and standards have been conducted.

• Steel and Composite Structures
• /
• 제5권5호
• /
• pp.407-420
• /
• 2005

This study presents the strength of braced and unbraced cold-formed steel wall frames consisting of several wall studs acting as columns, top and bottom tracks, and bracing members. The strength and the buckling mode of steel wall frames were found to be different due to the change of bracing type. In addition, the spacing of wall studs is a crucial factor to the strength of steel wall frames. The comparisons were made between the test results and the predictions computed based on AISI Code. The related specifications do not clearly provides the effective length factors for the member of cold-formed steel frame under compression. This paper proposes effective length factors for the steel wall frames based on the test results. A theoretical model is also derived to obtain the modulus of elastic support provided by the bracing at mid-height of steel wall frames in this research.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.438-444
• /
• 1997

Recently, optical disk drives are increasingly demanded to have higher speed as well as high information density, especially for applications like CD-ROM drives. To this end, improvement of their optical pick-up structure and control is recognized the very challenging issue. In this paper, the 2-D motion of the pick-up is first analytically modelled to identify the cause and effect of the troublesome cross coupling between auto-focusing and tracking directions. Subsequently, the overall system equations are derived to include the dynamics of the related components in the auto-focusing servo system. While its unmeasurable parameters being estimated by the least square error method, a simple but decent linear model can be obtained within its operating frequency range. To design the high speed and robust positional servo controller, the design specifications are detailed and H$\sub$.inf./ control method is employed based on the simple model. Using the pickup in a commercial 8 fold speed CD-ROM drive as an example, performance of the designed controller is verified by realtime experiments.