• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.76-81
• /
• 1989

This paper represents the preliminary design process and the performance of the sounding rockets. At the design phase of the development, we selected rocket configuration according to results of aerodynamic weight and thrust analysis. And the payload-apogee performance of the rockets are determined with the variation of the launch angle and payload weight. Also the performance trajectory was calculated by a particle trajectory simulation. And the parameters which affect the system performance was analyzed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.325-329
• /
• 2003

In this paper. the stability and performance analysis of wave-based teleoperation system is presented. For stability and performance analysis with respect to the variation of characteristic impedance b, loop gains of communication channel and minimum value of trasmitted impedance from slave side to the master side are considered. The stability of slave side may be enhanced by increasing characteristic impedance b, whereas exssively high value of b may degrade the performance, which imply a tradeoff between stability and performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1986년도 하계학술대회논문집
• /
• pp.305-310
• /
• 1986

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권6호
• /
• pp.678-684
• /
• 2015

Near-threshold computing (NTC) is now regarded as a promising candidate for innovative power reduction, which cannot be achieved with conventional super-threshold computing (STC). However, performance degradation and vulnerability to process variation in the NTC regime are the primary concerns. In this paper, we propose a voltage- and frequency-tuning methodology for mitigating the process-variation-induced problems in NTC-based manycore architectures. To implement the proposed methodology, we build up multiple-voltage multiple-frequency (MVMF) islands and apply a voltage-frequency tuning algorithm based on the critical-path monitoring technique to reduce the effects of process variation and maximize energy efficiency in the post-silicon stage. Experimental results show that the proposed methodology reduces overall power consumption by 8.2-20.0%, compared to existing methods in variation-sensitive NTC environments.

• 한국건설관리학회논문집
• /
• 제20권1호
• /
• pp.105-113
• /
• 2019

하나의 건설 프로젝트에는 다양한 작업들이 상호의존적으로 진행되어 복잡한 프로세스를 이룬다. 한 작업에서 공사변동이 발생하면 추가적으로 다른 작업들도 영향을 받게 되며 신속하게 진행되는 건설현장 특성상 매번 변동에 대한 합의를 도출하기는 매우 어렵다. 이에 본 연구에서는 시공 과정에 발생하는 공사변동에 대한 근본원인을 파악하고 주요 공사변동요인에 해당하는 작업들에 대하여 인접행렬을 구축하여 네트워크 분석을 실시하였다. 이를 통해 작업들 간 관계론적 특성과 구조적 위치를 파악하였다. 이러한 시공 프로세스에서의 작업 네트워크 분석을 통해 복잡한 시공 과정에서의 작업흐름을 안정화 시키고자 하며 공정 계획의 신뢰성과 프로젝트 성과를 향상시키고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.140-143
• /
• 1991

This paper describes a compensation method for the rotor resistance variation of induction machines in speed sensor-less vector control system using MRAS(model reference adaptive system). In case of rotor resistance variation, the analysis of the conventional speed sensor-less vector control system using MRAS is presented and the compensation method for rotor resistance variation using Fuzzy logic is proposed. In order to confirm the performance of the proposed algorithm, computer simulation is performed.

• 생약학회지
• /
• 제35권2호통권137호
• /
• pp.128-133
• /
• 2004

Aconitum triphyllum Nakai, the Korean spontaneous perennial herb, is one of the most important materials of oriental drug Fu-zi(aconite) and has long been used as cardiotonic for arrhythmia, analgesic and antiinflammatory drug in oriental countries. Although the plant is widely used for the preparation of aconite, the composition and amount of the toxic aconitine type alkaloids have not studied so far. As the preliminary study for seasonal variation of major constituents in mother tuber and daughter tuber of the plant, the authors tried to elucidate phytochemical characteristics of $C_{19}-diterpenoid alkaloids by $^{13}C-NMR$ spectra and seasonal variation of the alkaloidal contents by high performance liquid chromatography.

• Journal of Advanced Marine Engineering and Technology
• /
• 제15권1호
• /
• pp.59-70
• /
• 1991

Rupture of lubricant film, thermal characteristics, and variation of viscosity are very important factors to evaluate the performance of journal bearing. Variation of external conditions, load or rotational speed, largely influence these facters. For example, if rotational speed increases lubricant bulk temperature increases and viscosity drops. In this paper the effect of rotational speed variation on the characteristics of lubricant film in a journal bearing is investigated by experiment and theoretical analysis. It has been measured number of lubricant film rupture and lubricant bulk temperature form journal bearing which have been established at the various operating speed of shaft. The range of speed variation is from 900rpm to 2100rpm. Theoretical analysis has been carried out for rupture of lubricant film and thermal characteristics, and these results are compared with experimental results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.70-72
• /
• 2009

In this paper, nonlinear active noise control(ANC) of a 3rd-order Volterra system, which is robust to background noise variation, is proposed along with a variable step-size Gauss-Seidel pseudo affine projection(VSSGS-PAP) algorithm. Simulation results demonstrate that the proposed approach yields better nonlinear ANC performance in a background noise variation environment, compared with the conventional methods for the nonlinear ANC.

• 품질경영학회지
• /
• 제22권4호
• /
• pp.79-101
• /
• 1994

In modern manufacturing, a product consists of many components created by different processes. Variations in the individual component dimensions and in the processes may result in unacceptable final assemblies. Thus, engineers have increased pressure to properly set tolerance specifications for individual components and to control manufacturing processes. When a proper variation stack-up analysis is not performed for all of the components in a functional system, all component parts can be within specifications, but the final assembly may not be functional. Thus, in order to improve the performance of the final assembly, a proper variation stack-up analysis is essential for specifying dimensional tolerances and process control. This research provides a detailed case example of the use of variation stack-up analysis using a Monte Carlo simulation method to improve the defect rate of a complex process, which is the commutator brush track undercut process of an armature assembly of a small motor. Variations in individual component dimensions and process mean shifts cause high defect rate, Since some dimensional characteristics have non-normal distributions and the stack-up function is non-linear, the Monte Carlo simulation method is used.