• 오토저널
• /
• 제6권2호
• /
• pp.33-38
• /
• 1984

Research and development of automotive hydraulic brake hose has been carried out for domestic production. Four different trial products have been developed according to different design factors, and designated as Lot.. 1 through Lot. 4 respectively. Eleven kinds of static and dynamic performance tests have been conducted on each sample product of Lot. number, and the trial product by the Lot. 2 design factors was found to meet all the test specifications. Therefore, the automotive hydraulic brake hose could be localized in Korea.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.459-462
• /
• 2005

The KHST(Korean High Speed Train) which had been developed by through 'G7-R&D project' has succeeded trial running test up to 350km/h on the Kyoung-Bu High Speed Track in December 16th, 2004. In order to evaluate the function and characteristics of KHST, various experimental conditions have been considered and conducted. In this paper, measured current collection characteristics and dynamic behaviors of KHST's pantograph are analysed over 300 to 350km/h in running speed of KHST. A measuring system developed and installed on the KHST for measuring the performance and mechanical characteristics of the KHST's pantograph was used for this trial running test and eventually, we proofed that KHST has a remarkable and stable current collection characteristics as it had been designed.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.3633-3640
• /
• 2010

헬리컬형으로 자화된 영구자석을 이용한 비접촉 마그넷 기어를 개발하기 위하여 3차원 FEM 해석 기법을 활용하였고 마그넷 기어의 자기적 특성 해석 및 설계 요소기술을 확보하였다. 마그넷 기어를 이용한 클린 반송 컨베이어 및 회전장치의 성능평가를 위하여 class 10의 클린부스 환경에서 시험운전을 거쳐, 이송 속도, 최대 허용 토크, 클린도, 최대 이송 중량, 헌팅 유무, 소음도 등을 측정한 결과 클린도 class 10의 공정까지도 대응이 가능한 것으로 확인되었다.

• 수산해양기술연구
• /
• 제40권1호
• /
• pp.17-22
• /
• 2004

This study was carried out at the CWC of Chosun university for the purpose of resistance performance improvement of planing hull, and the results of the tests were confirmed cooperatively with WJFEL. G/T 100 ton class planing hull form was selected, and the improvement of hull form including appendages were performed by using some model test techniques. The model test scope comprises resistance relative tests including wave profile observation, trim and sinkage measurement and flow visualization tests at full load and trial conditions for one bare hull and for two appended hulls. The final wedge and spray strip combined with improved hull form showed about 1.0 knot speed improvement at both of full and trial conditions, and outstanding improvement for fore wave phenomena.

• 대한조선학회논문집
• /
• 제49권6호
• /
• pp.478-483
• /
• 2012

The speed performances of ice sea trial on the Arctic(2010 & 2011) area were shown different results depend on the ice floe size. Penetration phenomena of level ice was not happened on medium ice floe and tore up by the impact force because the mass of medium ice floe is similar to the mass of Araon which is Korean ice breaking research vessel and did not shut up by the ice ridge or iceberg. The sea trial on the Amundsen sea was performed at the big floe which is classified by WMO(World Meteorological Organization). Three measurements of ice properties and five results of speed trial were obtained with different ice thicknesses and engine powers. To evaluate speed of level ice trial and model test results at the same ice thickness and engine power, the correction method of HSVA(Hamburg Ship Model Basin) was used. The thickness, snow effect, flexural strength and friction coefficient were corrected to compare the speed of sea trial. The analyzed speed at 1.03m thickness of big floe was 5.85 knots at 10MW power and it's 6.10 knots at 1.0m ice thickness and the same power. It's bigger than the results of level ice because big floe was also slightly tore up by the impact force of vessel based on the observation of recorded video.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.9-16
• /
• 2017

This study describes the development of a 1-inch cryogenic glove valve for an LNG pumping system and localization development achieved through the performance test. The cryogenic valve used in the LNG pumping system plays an important role in maintaining a flow rate by LNG transportation. This trial manufactured goods, which was achieved through reverse engineering and developing the assembly process. The result of the leak test satisfied the internal pressure condition using the 78-bar normal temperature test and maintained the anti-leakage condition. Also, the result of the cryogenic leak test (BS 6364: low temperature test procedure) maintained anti-leakage at -196 and 52 bar, which satisfied the test standards.

• 한국도로학회논문집
• /
• 제11권4호
• /
• pp.133-142
• /
• 2009

본 연구는 지불계수를 이용하여 시험포장 구간의 품질을 평가하고 이에 따른 피로수명의 변화를 분석하기 위해 실시되었다. 특히 품질관리가 어려운 아스팔트 함량을 지불규정 기준인자로 선정하여 지불계수를 산출하였다. 먼저 아스팔트 함량이 피로수명에 미치는 영향을 확인하기 위하여 아스팔트 함량에 따른 피로수명의 연관성을 분석하였다. 이후 총 2회에 걸쳐 시험포장 구간에서 시료를 채취해서 지불계수를 산출하여 시험포장 구간의 품질을 평가하였으며, 지불계수에 따라 시험포장 구간의 품질에 차이가 있음을 확인 할 수 있었다. 시험포장 구간에 포설된 아스팔트 혼합물을 이용하여 시편을 제작, 피로수명을 분석하였다. 그 결과 지불계수가 높은 시험포장의 피로수명이 월등히 높음을 확인할 수 있었다. 이는 통계이론을 이용한 지불계수가 실제 포장의 피로수명을 반영한다는 것을 의미한다고 사료된다. 또한 시험포장 구간에 아스팔트 혼합물을 납품한 플랜트의 배합보고서와 동일한 시편을 제작하여 휨 피로시험을 실시하여 1, 2회차 시험포장의 피로수명들과 비교하였다. 그 결과 배합보고서를 기초로 제작한 시편의 피로수명이 시험포장 구간의 피로수명에 비해 월등히 높음을 알 수 있었다. 이는 입도나 기타 요인에 따른 공용성 감소현상이 발생 할 수 있음을 나타내는 것이라 사료된다. 따라서 지불규정을 적용중인 미국과 같이 입도, 공극률 등을 지불규정 기준인자로 선정하여 최종적인 지불계수를 산출하는 것이 보다 정확한 도로포장의 품질을 평가할 수 있을 것이다.

• Physical Therapy Rehabilitation Science
• /
• 제6권2호
• /
• pp.59-64
• /
• 2017

Objective: Elderly people with dementia experience not only cognitive dysfunction but also motor function deficits, such as balance and gait impairments. Recently, transcutaneous electrical nerve stimulation (TENS) has been used to reduce pain as well as to control muscle spasm, spasticity and motor performance in various types of subjects. The purpose of this study determined the effect of a single trial TENS on balance and gait function in elderly people with dementia. Design: A randomized controlled trial. Methods: Twenty-two subjects with dementia were assigned to the TENS group (n=12) and ten subjects were assigned to the control group (n=10) randomly. Subjects were classified into two groups: the TENS group (n=12) and the placebo-TENS group (n=10). The TENS group had electrical stimulation applied on the calf muscle for 15 minutes, while the placebo-TENS group had not received real electrical stimulation. The timed up and go test (TUG) and functional reach test (FRT) were used to measure the balance function, and the 10 meters walk test (MWT) and 6MWT were used to assess gait ability. All tests were performed before and after intervention under a single-blinded condition. Results: After intervention, there were significant improvements in TUG, FRT, 10MWT, and 6MWT results in the TENS group (p<0.05), while the placebo-TENS group did not show significant changes in all outcome measurements. There were also differences in all tests between the two groups at post-measurements (p<0.05). Conclusions: This study demonstrated that a single trial TENS application on the calf may be used to improve balance and gait function in elderly people with dementia.

• Journal of Ship and Ocean Technology
• /
• 제4권4호
• /
• pp.34-44
• /
• 2000

This paper deals with the sea trial results of a fast craft with the hybrid supported type hul form. waterjet propulsion system and motion control system. The hybrid-type container ship operable in the sea with a wave height of y6 m, a speed of 50 knots and a payload of 1,500 tons were designed. A 1/8 scale 10 m- long test craft was constructed and tested in open seas. The hydrodynamic performance such as speed, turning, motion control in waves and waterjet thrush was analyzed.

• 대한조선학회논문집
• /
• 제58권6호
• /
• pp.366-374
• /
• 2021

This paper presents the analysis of the speed-power performance in the real sea using a large container vessel data provided as a test bed from a shipping company. To perform a speed trial of the vessel during a commercial voyage, the on-board measuring device and various operation data acquisition systems were mounted on the vessel for long-term performance monitoring and the voyage operated under the container loading condition close to the design draft was adopted. The content of this paper consists of Part I and Part II. Part I, such as this paper, contains the speed trial method and analysis results of the operating vessel. Part II contains the analysis of the speed-power characteristics change over time and before and after hull cleaning using operation data measured from the voyage operated under a condition similar to the speed trial.