• Journal of radiological science and technology
• /
• v.46 no.3
• /
• pp.207-217
• /
• 2023

Image noise reduction algorithm performs important functions in light microscopy. This study aims to systematically review the research trend of types and performance evaluation methods of noise reduction algorithm in light microscopic images. A systematic literature search of three databases of publications from January 1985 to May 2020 was conducted; of the 139 publications reviewed, 16 were included in this study. For each research result, the subjects were categorized into four major frameworks-1. noise reduction method, 2. imaging technique, 3. imaging type, and 4. evaluation method-and analyzed. Since 2003, related studies have been conducted and published, and the number of papers has increased over the years and begun to decrease since 2016. The most commonly used method of noise reduction algorithm for light microscopy images was wavelet-transform-based technology, which was mostly applied in basic systems. In addition, research on the real experimental image was performed more actively than on the simulation condition, with the main case being to use the comparison parameter as an evaluation method. This systematic review is expected to be extremely useful in the future method of numerically analyzing the noise reduction efficiency of light microscopy images.

• Journal of Biosystems Engineering
• /
• v.23 no.5
• /
• pp.445-456
• /
• 1998

This study was carried out to evaluate the performance of a medium scale rice polisher of 2.5 t/h and to improve its performance for producing the clean rice with high quality. The maximum internal pressure, broken rice ratio. whiteness in the rice polisher were investigated, and the effects of outlet resistance, water spraying rate, shaft revolution speed and rice moisture content on the polishing performance were analyzed to find out proper operating conditions. The conclusions of this study were as follows: 1. In the performance evaluation of the polisher, the broken rice ratio increment of 0.1%, the max. internal pressure of about 11 N/${cm}^2$, and whiteness increment of 2.2~3.7 resulted at the conditions of 20 PS driving power, 950 rpm, 150 cc/min water spraying rate, 44.1 Nㆍcm outlet resistance and about 15% rice moisture content. 2. Though max. internal pressure and whiteness at the 17% rice moisture content were higher than those at the 15% moisture content under the same operating conditions of the polisher, but the broken rice rate at the 17% moisture content was absolutely low compared with that at 15% moisture content. The water spraying effect to reduce broken rice and to increase whiteness was much significant at the 15% moisture content not significant at 17% moisture content. 3. The main parameter of the performance was outlet resistance, and low resistance of about 44.1 Nㆍcm was recommended at the polisher. 4. The proper water spraying rate in the polisher was about 150 cc/min. 5. As the shaft revolution speed decreased from 950 rpm and 800 rpm to 650 rpm, the broken rice ratio increased and whiteness decreased. 6. As the driving power of the polisher increased from 20 PS to 30 PS, the max. internal pressure decreased by about 1~2.5 N/${cm}^2$ and whiteness increased by about 1~2, but the broken rice rate was not changed. 7. The proper operating conditions of the polisher seemed to be the revolution speed of 800-950 rpm, the water spraying rate of about 150 cc/min, the oulet resistance of about 44.1 N.cm and 30 PS driving power.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.3
• /
• pp.296-303
• /
• 2004

The heat and flow characteristics in a single-phase parallel-flow heat exchanger was examined numerically to obtain its optimal shape. A response surface method was introduced to approximately predict its performance with respect to the design parameters over the design domain. The inflow/outflow angle of the working fluid, the location of inlet/outlet, the protruding height of flat tube and the height of header were chosen as a design parameter The evaluation of the relative importance of the design parameters was performed based on a sensitivity analysis. An efficiency index was used as an evaluation characteristics value to simultaneously consider both the heat transfer and the pressure drop. The efficiency index of the optimum model, compared to that of the base model, was increased by 9.3%.

• Journal of Korean Society for Quality Management
• /
• v.36 no.4
• /
• pp.19-28
• /
• 2008

The purpose of this study is to search for the quality characteristics for evaluation of the information system. The quality characteristics are an important factor for selection, implementation and maintenance of the information system of the company. Of course in the end, the quality of the information system in a company is directly related with the business performance of the company. This paper is a study of a model with four independent variables, a parameter variable, and a total of 15 hypotheses, investigated by a questionnaire method. It conducted the model analysis of structural equation to use statistical package for questionnaire analysis.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.605-607
• /
• 2000

Although Equvalent Magnetic Circuit (EMC) method. Using lumped parameter and numerical analysis method are widely used for electric machine analysis. these are neither always accurate enough nor sometimes available to easily use. Moreover three dimensional finite element method (3D-FEM) is inherently unsuitable for electric machine performance evaluation due to its poor computational efficiency, such as too long calculation time and difficulty in modeling for analysis. In this paper, Nonlinear Equivalent Magnetic Circuit (NEMC) method in combination with 2D-FEM is proposed to analyze the electric machine requiring 3D-FEM, and this method applys to torque evaluation for rotary actuator of Electro Magnetic Electronic Controller Power Steering (EM-ECPS).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.3
• /
• pp.441-448
• /
• 2023

The quality of the casting process generates the largest source of defects in the manufacturing process, so its management is a key factor in productivity and quality evaluation. Based on the results of factor analysis, correlation analysis, and regression analysis with process data, this study aims to optimize the machine learning model to reduce the defect rate and verify the data suitability for smart factories.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1874-1889
• /
• 2022

In this study, we evaluate the thermal-hydraulic performance and economics of Printed Circuit Heat Exchanger (PCHE) according to the channel types and associated shape variables for the design of recuperators with Sodium-cooled Fast Reactors (SFRs). To perform the evaluations with variables such as the Reynolds number, channel types, tube diameter, and shape variables, a code for the heat exchanger is developed and verified through a comparison with experimental results. Based on the code, the volume and pressure drop are calculated, and an economic assessment is conducted. The zigzag type, which has bending angle of 80° and a tube diameter of 1.9 mm, is the most economical channel type in a SFR using CO₂ as the working fluid. For a SFR using N₂, we recommend the airfoil type with vertical and horizontal numbers of 1.6 and 1.1, respectively. The airfoil type is superior when the mass flow rate is large because the operating cost changes significantly. When the mass flow rate is small, volume is a more important design parameter, therefore, the zigzag type is suitable. In addition, we conduct a sensitivity analysis based on the production cost of the PCHE to identify changes in optimal channel types.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.2
• /
• pp.63-69
• /
• 2022

PURPOSE. The aim of this in vitro study was to investigate the accuracy (trueness and precision) of five intraoral scanners (IOS) using a novel reference model for standardized performance evaluation. MATERIALS AND METHODS. Five IOSs (Medit i500, Omnicam, Primescan, Trios 3, Trios 4) were used to digitize the reference model, which represented a simplified full-arch situation with four abutment teeth. Each IOS was used five times by an experienced operator, resulting in 25 STL (Standard Tessellation Language) files. STL data were imported into 3D software (Final Surface^®) and examined for inter- and intra-group analyses. Deviations in the parameter matching error were calculated. ANOVA F-test and Kruskal-Wallis test were applied for inter-group comparisons (α = .05); and the coefficient of variation (CV) was calculated for intra-group comparisons (in % ± SD). RESULTS. Primescan (matching error value: 0.015), Trios 3 (0.016), and Trios 4 (0.018) revealed comparable results with significantly higher accuracy compared to Medit i500 (0.035) and Omnicam (0.028) (P < .001). For intra-group comparison, Trios 4 demonstrated the most homogenous results (CV 15.8%). CONCLUSION. The novel reference model investigated in this study can be used to assess the performance of dental scanning technologies in the daily routine setting and in research settings.

• International Journal of Computer Science & Network Security
• /
• v.21 no.8
• /
• pp.55-64
• /
• 2021

In the last few years, the massive development in wireless networks, high internet speeds and improvement in car manufacturing has shifted research focus to Vehicular Ad-HOC Networks (VANETs). Consequently, many related frameworks are explored, and it is found that security is the primary issue for VANETs. Despite that, a small number of research studies have taken into consideration the identification of performance standards and parameters. In this paper, VANET security frameworks are explored, studied and analysed which resulted in the identification of a list of performance evaluation parameters. These parameters are defined and categorized based on the nature of parameter (security or general context). These parameters are identified to be used by future researchers to evaluate their proposed VANET security frameworks. The implementation paradigms of security frameworks are also identified, which revealed that almost all research studies used simulation for implementation and testing. The simulators used in the simulation processes are also analysed. The results of this study showed that most of the surveyed studies used NS-2 simulator with a percentage of 54.4%. The type of scenario (urban, highway, rural) is also evaluated and it is found that 50% studies used highway urban scenario in simulation.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.6
• /
• pp.1458-1467
• /
• 1999

Existing index structures such as extendable hashing and B+-tree do not support partial string searches perfectly. The inverted file method and the signature file method that are used in the web retrieval engine also have problems that they do not provide partial string searches and suffer from serious retrieval performance degradation respectively. In this paper, we propose an efficient index method that supports partial string searches and achieves good retrieval performance. The proposed index method is based on the Inverted file structure. It constructs the index file with patterns that result from dividing terms by two syllables to support partial string searches. We analyze the characteristics of our proposed method through simulation experiments using wide range of parameter values. We analyze the derive analytic performance evaluation models of the existing inverted file method, signature file method and the proposed index method in terms of retrieval time and storage overhead. We show through performance comparison based on analytic models that the proposed method significantly improves retrieval performance over the existing method.