• Korean Journal of Veterinary Service
• /
• v.23 no.4
• /
• pp.321-333
• /
• 2000

In order to know the depletive changes of sulfamethazine residues in senlm and practical organs of rats orally administered with sulfamethazine sodium(SMS), the concentration of sulfamethazine was measured in serum and tissue(kidney, liver, spleen, testis, and skeletal muscle) of rats with using high performance liquid chromatography(HPLC). SMS was orally administrated to sprague-dawley male rats(body weight, 200~300g) with using sonde at the rate of 20mg/100g body weight(recommended therapeutic dose) on once a day for 3 days. There were investigated the depletive changes of the sulfamethazine in serum, kidney, liver, spleen, testis and skeletal muscle of rat at the time 8 hours, 1st, 2nd, 3rd, 4th, 5th and 6th day after administration SMS, respectively. The results obtained were summarized as follows; 1. After oral administration of the SMS, the mean concentrations of sulfamethazine in serum according to the time lapsed were showed 215.53$\pm$42.99ppm at the 8 hours after withdrawal of medicated sulfamethazine. And gradually according to the time lapsed, the concentrations of sulfamethazine residues in serum were significantly (p<.05) decreased 25.87$\pm$5.18ppm at 1st day, 2.30$\pm$0.61ppm at 3rd day and 0.11$\pm$0.02ppm at 6th day respectively. 2. The mean concentrations of sulfamethazine in kidney, liver, spleen, muscle and testis according to the time lapsed after administration SMS were showed 83.82$\pm$12.16, 81.77$\pm$12.88, 36.96$\pm$5.35, 35.96$\pm$TEX>$\pm$1.39 and 27.89$\pm$1.92 ppm at the 8 hours, respectively. And gradually according to the time lapsed, the concentrations of sulfamethazine residues in the each of samples were significantly(p<.05) decreased such as 7.15$\pm$0.26, 5.62$\pm$0.72, 2.43$\pm$0.29, 1.99$\pm$0.14 and 3.11$\pm$0.48 ppm at 1st day, 0.52$\pm$0.04, 1.32$\pm$0.22, 0.13$\pm$0.03, 0.15$\pm$0.06 and 0.26$\pm$0.11ppm at 3rd day, and 0.03$\pm$0.01, 0.11$\pm$0.03, 0.02$\pm$0.01, 0.009$\pm$0.001 and 0.02$\pm$0.01 ppm at 6th day, respectively. 3. After oral administration of the SMS to rats, the residual concentrations of sulfamethazine in skeletal muscle were significantly (p<.05) decreased 35.96$\pm$1.39 to 0.009$\pm$$\pm$0.001 ppm between 8 hours and 6th day, respectively From the 4th day, the residual concentrations of sulfamethazine were showed 0.10$\pm$0.04 ppm below 0.1 ppm at the permitted limit concentration of muscle in Korea. In conclusion, this study could be suggested the relationship between administrated period, doses of sulfonamides and residual aspects of serum and practical organs, and the importance of observing ceasing period of antibiotic drugs before forwarding livestocks to slaughter.

• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.409-416
• /
• 2015

ICP-AES has been used in many laboratories due to the advantages of wide calibration range and multi-element analysis, but it may give erroneous results and suffer from spectral interference due to the large number of emission lines associated with each element. In this study, certified reference materials (CRMs) and field samples were analyzed by ICP-AES and HG-AAS according to the official Korean testing method for soil pollution to investigate analytical problems. The applicability of HG-ICP-AES was also tested as an alternative method. HG-AAS showed good accuracies (90.8~106.3%) in all CRMs, while ICP-AES deviated from the desired range in CRMs with low arsenic and high Fe/Al. The accuracy in CRM030 was estimated as below 39% at the wavelength of 193.696 nm by ICP-AES. Significant partial overlaps and sloping background interferences were observed near to 193.696 nm with the presence of 50 mg/L Fe and Al. Most CRMs were quantified with few or no interferences of Fe and Al at 188.980 nm. ICP-AES properly assessed low and high level arsenic for field samples, at 188.980 nm and 193.696 nm, respectively. The importance of the choice of measurement wavelengths corresponding to relative arsenic level should be noted. Because interferences were affected by the sample matrix, operation conditions and instrument figures, the analysts were required to consider spectral interferences and compare the analytical performance of the recommended wavelengths. HG-ICP-AES was evaluated as a suitable alternative method for ICP-AES due to improvement of the detection limit, wide calibration ranges, and reduced spectral interferences by HG.

• Journal of The Korean Association For Science Education
• /
• v.15 no.2
• /
• pp.173-184
• /
• 1995

The purpose of this study was to analyse the problems of 'Science Inquiry Experiment Contest(SIEC)' which was one of 8 programs of 'The 2nd Student Science Inquiry Olympic Meet(SSIOM)'. The results and conclusions of this study were as follows: 1. It needs to reconsider the role of practical work within science experiment because practical work skills form one of the mainstays in current science. But the assessment of students' laboratory skills in the contest was made little account of. It is necessary to remind of what it means to be 'good at science'. There are two aspects: knowing and doing. Both are important and, in certain respects, quite distinct. Doing science is more of a craft activity, relying more on craft skill and tacit knowledge than on the conscious application of explicit knowledge. Doing science is also divided into two aspects, 'process' and 'skill' by many science educators. 2. The report's and checklist's assessment items were overlapped. Therefore it was suggested that the checklist assessment items were set limit to the students' acts which can't be found in reports. It is important to identify those activities which produce a permanent assessable product, and those which do not. Skills connected with recording and reporting are likely to produce permanent evidence which can be evaluated after the experiment. Those connected with manipulative skills involving processes are more ephemeral and need to be assessed as they occur. The division of student's experimental skills will contribute to the accurate assess of student's scientific inquiry experimental ability. 3. There was a wide difference among the scores of one participant recorded by three evaluators. This means that there was no concrete discussion among the evaluators before the contest. Despite the items of the checklists were set by preparers of the contest experiments, the concrete discussions before the contest were necessary because students' experimental acts were very diverse. There is a variety of scientific skills. So it is necessary to assess the performance of individual students in a range of skills. But the most of the difficulties in the assessment of skills arise from the interaction between measurement and the use. To overcome the difficulties, not only must the mark needed for each skill be recorded, something which all examination groups obviously need, but also a description of the work that the student did when the skill was assessed must also be given, and not all groups need this. Fuller details must also be available for the purposes of moderation. This is a requirement for all students that there must be provision for samples of any end-product or other tangible form of evidence of candidates' work to be submitted for inspection. This is rather important if one is to be as fair as possible to students because, not only can this work be made available to moderators if necessary, but also it can be used to help in arriving at common standards among several evaluators, and in ensuring consistent standards from one evaluator over the assessment period. This need arises because there are problems associated with assessing different students on the same skill in different activities. 4. Most of the students' reports were assessed intuitively by the evaluators despite the assessment items were established concretely by preparers of the experiment. This result means that the evaluators were new to grasp the essence of the established assessment items of the experiment report and that the students' assessment scores were short of objectivity. Lastly, there are suggestions from the results and the conclusions. The students' experimental acts which were difficult to observe because they occur in a flash and which can be easily imitated should be excluded from the assessment items. Evaluators are likely to miss the time to observe the acts, and the students who are assessed later have more opportunity to practise the skill which is being assessed. It is necessary to be aware of these problems and try to reduce their influence or remove them. The skills and processes analysis has made a very useful checklist for scientific inquiry experiment assessment. But in itself it is of little value. It must be seen alongside the other vital attributes needed in the making of a good scientist, the affective aspects of commitment and confidence, the personal insights which come both through formal and informal learning, and the tacit knowledge that comes through experience, both structured and acquired in play. These four aspects must be continually interacting, in a flexible and individualistic way, throughout the scientific education of students. An increasing ability to be good at science, to be good at doing investigational practical work, will be gained through continually, successively, but often unpredictably, developing more experience, developing more insights, developing more skills, and producing more confidence and commitment.

• Journal of Venture Innovation
• /
• v.1 no.1
• /
• pp.1-14
• /
• 2018

The 4th Industrial Revolution is making a big change for our company like the tsunami. The CPS system, which is represented by the digital age, is based on the data accumulated in the physical domain and is making business that was not imagined in the past through digital technology. As a result, the business model of the 4th Industrial Revolution era is different from the previous one. In this study, we analyze the trends and the issues of business innovation theory research. Then, the business innovation model of the digital age was compared with the previous period. Based on this, we have searched for a business model suitable for the 4th Industrial Revolution era. The existing business models have many difficulties to explain the model of the digital era. Even though more empirical research should be supported, Michael Porter's diamond model is most suitable for four cases of business models by applying them. Type A sharing outcome with customer is a model that pay differently according to the basis of customer performance. Type B Value Chain Digitalization model provides products and services to customers with faster and lower cost by digitalizing products, services and SCM. Type C Digital Platform is the model that brings the biggest ripple effect. It is a model that can secure profitability by creating new market by creating the sharing economy based on digital platform. Finally, Type D Sharing Resources is a model for building a competitive advantage model by collaborating with partners in related industries. This is the most effective way to complement each other's core competencies and their core competencies. Even though numerous Unicorn companies have differentiated digital competitiveness with many digital technologies in their respective industries in the 4th Industrial Revolution era, there is a limit to the number of pieces to be listed. In future research, it is necessary to identify the business model of the digital age through more specific empirical analysis. In addition, since digital business models may be different in each industry, it is also necessary to conduct comparative analysis between industries

• Korean Journal of Environmental Agriculture
• /
• v.32 no.1
• /
• pp.70-77
• /
• 2013

BACKGROUND: Nitroxoline is an antibiotic agent. It is used for the treatment of the second bacterial infection by the colibacillosis, salmonellosis and viral disease of the poultry. When the nitroxoline is indiscreetly used, the problem about the abuse of the antibiotics can occur. Therefore, this study presented the residue analytical method of nitroxoline in food for the safety management of animal farming products. METHODS AND RESULTS: A simple, sensitive and specific method for nitroxoline in chicken muscle by high performance liquid chromatograph with PDA was developed. Sample extraction with acetonitrile, purification with SPE cartridge (MCX) were applied, then quantitation by HPLC with C18 column under the gradient condition with 0.1 % tetrabutylammonium hydroxide-phosphoric acid and methanol was performed. Standard calibration curve presented linearity with the correlation coefficient ($r^2$) > 0.999, analysed from 0.02 to 0.5 mg/L concentration. Limit of quantitation in chicken muscle showed 0.02 mg/kg, and average recoveries ranged from 72.9 to 88.1 % in chicken muscle. The repeatability of measurements expressed as coefficient of variation (CV %) was less than 12 % in 0.02 and 0.04 mg/kg. CONCLUSION(S): Newly developed method for nitroxoline in chicken muscle was applicable to food inspection with the acceptable level of sensitivity, repeatability and reproducibility.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.190-196
• /
• 2010

Purpose: This study was undertaken to investigate the feasibility of using automated liquid-handling systems equipped with reusable fixed tips in Radioimmunoassays and to demonstrate that the use of an automated pipetting instrument can decrease in the typical daily workload. Materials and Methods: The precisions of the automated pipettor and the manual pipettor were determined gravimetrically (n=30). A total of 30 specimens for HBs Ag were repeatedly pipetted (three replicates) with the automated pipettor and then retested. PSA samples were simultaneously pipetted with either the automated pipettor or the manual pipettor and then analyzed (n=40). Sample carryover test assessed for CA19-9, AFP and HCG when the automated pipettor was used. Pipetting speed of the automated pipettor and the manual pipettor were compared by evaluation of each workload. Results: The precisions coefficients of variation (CV) were 2.1% for the automated pipettor and 1.6% for manual pipettor. The mean cpm and CV for each group of replicates were 41,203 cpm and 3.7% for HBs Ag positive specimens, and 99 cpm and 7.9% for HBs Ag negative specimens, respectively. PSA results showed no significant differences between automated pipettor and manual pipettor (p=0.15, r=0.999). Carryover for CA19-9, AFP and HCG analytes was <0.1 ppm or below the assay limit of detection. Pipetting speed was significantly improved by using the automated instrument. Conclusion: There was no evidence that the use of an automated pipettor adversely affected any of the performance characteristics of the assay. Indeed, routine use of the Tecan automated pipettor has resulted in a decrease in the typical daily workload.

• The Korean Journal of Financial Management
• /
• v.25 no.1
• /
• pp.51-84
• /
• 2008

We investigate the signaling effect of repurchase preceding new equity issue using Korean data. In a short time span, firms announce stock repurchases and equity offerings. The proximity of two events in Korean firms indicates that those are not independent of each other. In this paper, we test the signaling effect of repurchase on equity offerings on the two measures. One is announcement effect, which is measured as CAR(0, +2). The other is the effectiveness which is measured as CAR(0, +30) because the price movement during this window influences on the price of new issues. Previous studies that stock repurchase convey positive signal to equity offerings-Billet and Xue(2004) and Jung(2004)-construct sample without the limit of time interval between two events. This causes the unclear relation between those because of the long time interval. In this study we consider only samples of being within one year each other to reduce this problem and clarify the signal of repurchase on equity offerings. Korean firms are allowed to repurchase own shares with two different method. One is direct repurchase as same as open market repurchase. The other is stock stabilization fund and stock trust fund which trust company or bank buy and sell their shares on the behalf of firms. Generally, the striking different characteristic between direct repurchase and indirect repurchase is following. Direct repurchase is applied by more strict regulation than indirect repurchase. Therefore, the direct repurchase is more informative signal to the equity offering than the indirect repurchase. We construct two sample firms- firms with direct repurchase preceding-equity offerings and indirect repurchase-preceding equity offering, and one control firms-equity offerings only firms-to investigate the announcement effect and the effectiveness of repurchases. Our findings are as follows. Direct repurchase favorably affect the price of new issues favorably. CAR(0, +2) of firms with direct repurchase is not different from that of equity offerings only firms but CAR(0, +30) is higher than that of equity offerings only firms. For firms with indirect repurchase and equity offerings, Both the announcement effect and the effectiveness does not exist. Jung(2004) suggest the possibilities of how indirect stock repurchase can be regarded as one of unfair trading practices on based on the survey results that financial managers of some of KSE listed firms have been asked of their opinion on the likelihood of the stock repurchase being used in unfair trading. This is not objective empirical evidence but opinion of financial managers. To investigate whether firms announce false signal before equity offerings to boost the price of new issues, we calculate the long-run performance following equity offerings. If firms have announced repurchase to boost the price of new issues intentionally, they would undergo the severe underperformance. The empirical results do not show the severer underperformance of both sample firms than equity offerings only firms. The suggestion of false signaling of repurchase preceding equity offerings is not supported by our evidence.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.4
• /
• pp.105-113
• /
• 2003

Successful operation of a reactor can be accomplished when it is operated at proper D depending on the state of degradation. Operation at high D leads to the washout of biomass in the reactor while operation at low D leads to product inhibition due to the accumulation of excess VFA. These appear to limit the production of hydrogen to reach a higher level. Operation by D control was performed to improve the efficiency of hydrogen fermentation of food waste. Although simple organic matters were rapidly degraded in the early stage (day 1-2), proper VFA concentration and pH values were kept in the reactor at D of $4.5d^{-1}$, which was previously reported to be optimum initial D. High butyrate/acetate (B/A) ratios over 3.2 were obtained. Without D control, the reduction of simple organic matters after day 2 caused the decrease of VFA production and the increase of pH. Hydrogen production also decreased, as microbial proliferation was less than microbial loss by washout. However, the reactor performance was dramatically improved at D control from 4.5 to $2.3d^{-1}$. It showed the highest B/A ratios over 2.0 among the reactors on day 4-7. The second hydrogen peak appeared on day 4, resulting in the highest fermentation efficiency (70.8%) among the reactors. It was caused by the enhanced degradation of slowly degradable matters. The COD removed was converted to hydrogen (19.3%), VFA (36.5%), and ethanol (15.0%). Therefore, the strategy using D control, depending on the state of degradation, was effective in improving the efficiency of hydrogen fermentation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.2
• /
• pp.203-214
• /
• 2014

We measured the contact dermatitis-causing substances concentrations in 28 commercial oxidative hair-coloring products. This study was aimed to provide the fundamental data about oxidative hair-coloring products. We selected 10 oxidation dyes (p-phenylenediamine, toluene-2,5-diamine, m-phenylenediamine, nitro-p-phenylenediamine, p-aminophenol, m-aminophenol, o-aminophenol, p-methylaminophenol, N,N'-bis(2-hydroxyethyl)-p-phenylenediamine sulfate, 2-methyl-5-hydroxyethylaminophenol) and 4 heavy metal (nikel; Ni, chromium; Cr, cobalt; Co, copper; Cu) as contact dermatitis-causing substances. To identify 10 oxidation dyes, hexane-2% sodium sulfite was used for the rapid and simple extraction and ultra performance liquid chromatography (UPLC) analysis was used for simultaneous analysis in 12 minutes. 10 oxidative dyes were detected as indicated on the product packaging and each concentration was lower than prescribed upper concentration limit by pharmaceutical manufacturing standards. And we analysed inductively coupled plasma-optical emission spectrophotometer (ICP-OES) for content search of heavy metal after microwave digestion. The heavy metal average concentration in oxidative hair-coloring products was 0.572 ${\mu}g/g$ for Ni, 3.161 ${\mu}g/g$ for Cr, 2.029 ${\mu}g/g$ for Co, 0.420 ${\mu}g/g$ for Cu, respectively. The average of concentration in powder type (henna) was higher than those of other foam and cream type oxidative hair-coloring products as follows; 1.800 ${\mu}g/g$ for Ni, 10.127 ${\mu}g/g$ for Cr, 7.082 ${\mu}g/g$ for Co, 1.451 ${\mu}g/g$ for Cu. Hair coloring products were classified into the six colors - black, dark brown, brown, dark brown, light brown, red brown and analyzed. Brown color had the highest average concentration of Co and the others had the highest average concentration of Cr.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.5
• /
• pp.410-416
• /
• 2016

After the Sewol Ferry accident, the importance of maritime safety has been emphasized in Korea. In particular, educational and experience training are not only being conducted for maritime personnel but also in schools and at maritime-related organizations in order to broadly instill maritime safety awareness. Based on SOLAS regulations, safety education for sailors conducted every 10 days passenger boats, and fire-fighting drills and abandon-ship training should be conducted once a month on merchant ships. After the Sewol Ferry accident, the maximum number of trainees was reduced from 40 to 20 in order to improve the effectiveness of these training sessions by requiring all trainees to participate in the actual training. The current training process consists of two steps: textbook-based theoretical training and actual practice. Current training environment provides limited capability from human and facility recourses which limit the numbers of trainee participated and system operation time. By introducing the simulation training, it will improve the trainee skill and performance prior to the on-site training and allow the more effective and rapid progress on actual practice. Therefore, it will be proposed the three-step training method in order to improve the effectiveness on fire-fighting drill in Maritime Safety Education on this study. This study suggests a three step training method that would increase the efficiency of maritime safety education. An image-training step to enhance individual task awareness and equipment usage via simulation techniques after theoretical training has been added. To implement this simulation, a virtual training session will be conducted before actual training, based on knowledge obtained from theoretical training, which is expected to increase the speed with which trainees can adapt during the practical training session. In addition, due to the characteristics of the simulation, repeated training is possible for reaction drills in emergency circumstances and other various scenarios that are difficult to replicate in actual training. The efficiency of training is expected to improve because trainees will have practiced before practical training takes place, which will decrease the time needed for practical training and increase the number of training sessions that can be executed, increasing the efficiency of training overall. This study considers development methods for fire-fighting drill simulations using virtual reality techniques.