• International Journal of Fluid Machinery and Systems
• /
• v.9 no.4
• /
• pp.307-312
• /
• 2016

The present study reported of the use of special shaped blade to reduce the difference in pressure across the Wells turbine for wave energy conversion. The blade profile was composed of NACA0020 airfoils and trailing edge was notched like chevron. Experiments were performed investigating the influence of trailing edge shape on the turbine performance. Four notch depths were used to investigate the effect of depth of cut on the turbine performance. As results, by placing a notch-cut at the trailing edge of the blade, it was possible to reduce the pressure difference across the turbine without lowering the efficiency. In addition, the pressure difference substantially reduced at a constant rate with the increase of the cut ratio.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.8
• /
• pp.893-901
• /
• 1992

In this paper, we propose a new resolver-to digital(R/D) conversion method, in which a bang-bang type phase comparator is employed for fast tracking. We eliminate from the R/D conversion loop the low-pass filter which is needed to reject carrier signal and noise. Instead, we employ two prefilters outside the R/D conversion loop that take the role of the low-pass filter. Thereby, we can construct a fast and accurate tracking R/D converter. Some simulation and experimental results as well as mathematical performance analysis are presented to demonstrate the superior tracking performance of our R/D converter over conventional tracking R/D converters.

• Journal of Power Electronics
• /
• v.9 no.1
• /
• pp.124-131
• /
• 2009

This paper presents a PWM dc-ac converter regulation using a Single Input Fuzzy PI Controller (SIFPIC). The SIFPIC is derived from the signed distanced method, which is a simplification of a conventional fuzzy controller. The simplification results in a one-dimensional rule table, that allows its control surface to be approximated by a piecewise linear relationship. The controller multi-loop structure is comprised of an outer voltage and an inner current feedback loop. To verify the performance of the SIFPIC, a low power PWM dc-ac converter prototype is constructed and the proposed control algorithm is implemented. The experimental results show that the SIFPIC performance is comparable to a conventional Fuzzy PI controller, but with a much reduced computation time.

• Journal of Environmental Science International
• /
• v.31 no.12
• /
• pp.1135-1138
• /
• 2022

This study was conducted to evaluate the effects of sipjeondaebo-tang by-product powder on the growth performance of broilers. A total of 120 broiler chicks (Arbor acres) at 0 days old were assigned to one of two treatments with three replications: control and 1% sipjeondaebo-tang by-product powder. Weight gain at 3 weeks and feed intake at 5 weeks were significantly (p<0.05) influenced by the sipjeondaebo-tang by-product powder treatments. However, there were no significant differences in the feed conversion ratio between treatments as a function of treatment time (p>0.05). Overall, weight gain and the feed conversion ratio were slightly greater for the sipjeondaebo-tang by-product powder treatment than the control treatment. It was concluded that sipjeondaebo-tang by-product powder may be an appropriate source of feed additive, without any negative effects on the growth performance of the broilers.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.3 s.94
• /
• pp.319-326
• /
• 2005

In the multi-carrier OFDM communication system for the high data rate transmission, the ICI caused by phase noise of transceiver local oscillator may degrade the system performance seriously. In this paper, a new ICI self-cancellation scheme using data-conjugate method is proposed to reduce the ICI caused by phase noise effectively. Then, the CPE, ICI and CIR are derived by the phase noise linear approximation method. Besides, to analyze the efficiency of system performance improvement, the proposed method is compared with the original OFDM and the conventional ICI self-cancellation scheme using data-conversion method. As results, the performance degradation caused by ICI can be mitigated effectively in the OFDM system with ICI self-cancellation scheme, and more performance improvement can be achieved by the proposed ICI self-cancellation scheme using data-conjugate method than the conventional ICI self-cancellation scheme using data-conversion method when phase noise exists.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.73-76
• /
• 2014

With the increasing popularity of multi-core processors, they have been adopted even in embedded systems. Under this circumstance many multimedia applications can be parallelized on multi-core platforms because they usually require heavy computations and extensive memory accesses. This paper proposes an efficient thread-level parallel implementation for color space conversion on multi-core CPU. Thread-level parallelism has been becoming very useful parallel processing paradigm especially on shared memory computing systems. In this work, it is exploited by allocating different input pixels to each thread for concurrent loop executions. For the performance evaluation, this paper evaluate the performace improvements for color conversion on multi-core processors based on the processing speed comparison between its serial implementation and parallel ones. The results shows that thread-level parallel implementations show the overall similar ratios of performance improvements regardless of different multi-cores.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.3
• /
• pp.123-130
• /
• 2005

In this study, we evaluated the CH4 and CO conversion efficiencies over the oxidation catalysts for natural gas vehicle with lean-burn system. On the fresh catalyst, the conversion efficiency was increased when the loading of precious metal was increased. On the aged catalyst, the conversion efficiency was decreased as increasing the excess air ratio. We could confirm the measuring conversion efficiency of the unsteady state with the FTIR and that of steady state with the GC The temperature increasing ratio of unsteady state is acceptable from 3$^{\circ}C$/min. to 15$^{\circ}C$/min. for the evaluation of catalyst conversion performance , which has within the 4$\%$ of the difference of conversion efficiency. We observed a physical behavior of the thermal aged catalyst's surface using TEM and BET device. It was found that the precious metal was grown to the micro-scopic size by thermal aging process.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.2
• /
• pp.76-84
• /
• 2002

On-line conversion estimation of enzymatic esterification reactions in solvent-free media was investigated. In principle, conversion to ester can be determined from the amount of water produced by the reaction, because water is formed as a by-product in a stoichiometric manner. In this study, we estimated the water production rate only from some measurements of relative humidity and water balances without using any analytical methods. In order to test the performance of the on-line conversion estimation, the lipase-catalyzed esterification of n-capric acid and n-decal alcohol in solvent-free media was performed whilst controlling water activity at various values. The reaction conversions estimated on-line were similar to those determined by offline gas chromatographic analysis. However, when the water activity was controlled at higher values, discrepancies between the estimated conversion values and the measured values became significant. The deviation was found to be due to the inaccurate measurement of the water content in the reaction medium during the initial stages of the reaction. Using a digital filter, we were able to improve the accuracy of the on-line conversion estimation method considerably. Despite the simplicity of this method, the on-line estimated conversions were in good agreement with the off-line measured values.

• Journal of Power Electronics
• /
• v.13 no.5
• /
• pp.798-805
• /
• 2013

This paper presents the control and implementation of the dual-stator-winding induction generator for variable frequency AC (VFAC) generating system. This generator has two sets of stator windings embedded into the stator slots. The power winding produces the VFAC power to feed the loads, and the control winding is connected to the static excitation controller to control the generator for output voltage regulation with speed and load variations. On the basis of the idea of power balance, an instantaneous slip frequency control (ISFC) strategy using the information of both the output voltage and the output power is used in this system. A series of experiments is carried out on a 15 kW prototype for verification. Results show that the system has good static and dynamic performance in a wide speed range, which demonstrates that the ISFC strategy is suitable for this system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.5C
• /
• pp.522-529
• /
• 2002

MMIC circuits in whole receiver system was fabricated based on GaAs pHEMT technology. And a V-band downconverter module was fabricated by integrating these circuits. The downconverter module consists of a LO drive power amplifier which generates 24dBm output power, a low noise amplifier(LNA) which shows 20 dB small signal gain, an active parallel feedback oscillator which generates 1.6 dBm output power, and a cascode mixer which shows over 6dB conversion gain. The good conversion gain performance of our mixer made no need to attach any IF amplifier which grows conversion gain. Measured results of the complete downconverter show a conversion gain of over 20 dB between 57.5 GHz and 61.7GHz without IF amplifier.