• Journal of the Korea Convergence Society
• /
• v.10 no.1
• /
• pp.163-176
• /
• 2019

The purpose of this study is to examine the impact of PM consultant leadership competence on consulting repurchase intention and the impact of SME CEO participation on consulting repurchase intention. The validity of the measurement model was secured through CFA (Confirmative Factor Analysis) for the questionnaire data, and consistency was secured through the same method convenience, and significant results were obtained. In other words, not only the ability of PM consultant in repurchase of consulting is important, but also confirms that repurchase intention differs according to the participation of manager. Therefore, the performance that manager feels depends on the degree of manager's interest in repurchase and plays an important role in repurchase. As a result, it is important for PM to report to manager and / or make the manager participate in consulting process so that manager can be interested. In this study, it is difficult to generalize the relationship between PM's leadership role and manager's involvement in the repurchase intention. However, it is meaningful that PM's competence as well as management's participation are very important, and that this study figured out which drection PM's leadership should focus on. The purpose of this study is to investigate the effect of the variables on the repurchase intention.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.23-28
• /
• 2019

The structural integrity of a surface metal coating was evaluated through numerical results to improve the efficiency and reduce the damage caused by cavitation in ships and marine plants. The goal was to ensure structural strength and performance, even if the thickness of the wing is reduced to reduce the weight of the material and surface coating. Analytical methods were used for four models: a non-coating model, one with the same thickness after coating, one with a thickness reduction of 3% after coating, and one with thickness reduction of 5% after coating. With a thickness reduction of 5% after coating, the stress was increased to 12%, and the safety factor was 0.99%, so the structural integrity was insufficient. However, a better material or a thicker coating could allow a sufficient safety factor to be secured. The structural integrity was improved by the coating, and even when the weight was reduced up to 5%, the structural integrity could be sufficiently secured due to the coating effect.

• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.1-14
• /
• 2019

A full scale hydrodynamic simulation that requires an accurate reproduction of shock-induced detonation was conducted for design of an energetic component system. A detailed hydrodynamic analysis SW was developed to validate the reactive flow model for predicting the shock propagation in a train configuration and to quantify the shock sensitivity of the energetic materials. The pyrotechnic device is composed of four main components, namely a donor unit (HNS+HMX), a bulkhead (STS), an acceptor explosive (RDX), and a propellant (BPN) for gas generation. The pressurized gases generated from the burning propellant were purged into a 10 cc release chamber for study of the inherent oscillatory flow induced by the interferences between shock and rarefaction waves. The pressure fluctuations measured from experiment and calculation were investigated to further validate the peculiar peak at specific characteristic frequency (${\omega}_c=8.3kHz$). In this paper, a step-by-step numerical description of detonation of high explosive components, deflagration of propellant component, and deformation of metal component is given in order to facilitate the proper implementation of the outlined formulation into a shock physics code for a full scale hydrodynamic simulation of the energetic component system.

• Journal of the Korea Computer Graphics Society
• /
• v.25 no.3
• /
• pp.11-20
• /
• 2019

In this study, a novel virtual reality (VR) experience environment is proposed for enabling walking adaptation of visually impaired people. The core of proposed VR environment is based on immersive walking interactions and deep learning based braille blocks recognition. To provide a realistic walking experience from the perspective of visually impaired people, a tracker-based walking process is designed for determining the walking state by detecting marching in place, and a controller-based VR white cane is developed that serves as the walking assistance tool for visually impaired people. Additionally, a learning model is developed for conducting comprehensive decision-making by recognizing and responding to braille blocks situated on roads that are followed during the course of directions provided by the VR white cane. Based on the same, a VR application comprising an outdoor urban environment is designed for analyzing the VR walking environment experience. An experimental survey and performance analysis were also conducted for the participants. Obtained results corroborate that the proposed VR walking environment provides a presence of high-level walking experience from the perspective of visually impaired people. Furthermore, the results verify that the proposed learning algorithm and process can recognize braille blocks situated on sidewalks and roadways with high accuracy.

• Management & Information Systems Review
• /
• v.38 no.3
• /
• pp.137-150
• /
• 2019

As job market squeezes and more institutions have been requiring NCS(National Competency Standards) based recruitment, the importance of NCS has been growing. Among the 10 domains of NCS, the most relevant one with task processing and organizational performance filed is 'task processing capability group', which is becoming more important with the advent of the fourth industrial revolution era. The purpose of this study is to investigate the effect of college students' task processing capability group on their career outcome expectation and career preparation behavior. In this study, we set up a process model to comprehend the effect of college students' task processing capability group on career outcome expectation and career preparation behavior based on social cognitive career theory. Empirical analysis showed that task processing capability group(problem-solving capability, information capability, resource management capability, organizational capability) positively influenced college students' career outcome expectation and career preparation behavior for employment. However, the impact of technical capability on career outcome expectation and career preparation behavior was not explained. In order to strengthen the task processing capability group of college students, not only university-level efforts, but also college and faculty's efforts should be accompanied. Other academic and practical implications are discussed.

• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.151-157
• /
• 2019

In geostationary satellite communications, which are widely used for broadcasting and communication, there is a path loss where the signal power on the path is largely reduced. It is important to consider rain attenuation when calculating link budget because the Ka band frequency is vulnerable to rain attenuation. In this study, rainfall trends were analyzed by using rainfall data from the year 2000 in four regions of Korea (Seoul, Incheon, Busan, Jeju) and the rainfall attenuation was calculated. This was used to analyse the satellite link budget and receiving performance for the down-link of the korea satellite COMS. In this study, the calculated G/T for the rainfall intensity of 0.5% per year using the rainfall data for 18 years increased by approximately $8.5dBK^{-1}$ compared to the ITU's zone-K rain model, and decreased by approximately $1dBK^{-1}$ compared to the precipitation data for 13 years from the TTA(Korea Telecommunications Technology Association). The results of this study can be used for the design of G/T in domestic-installed satellite ground station.

• Explosives and Blasting
• /
• v.36 no.4
• /
• pp.1-8
• /
• 2018

This numerical study was intended to evaluate the applicability of the half charge blasting to mining and tunnelling. The half charge blasting is a method that two separate rounds are sequentially blasted for the rock burdens in which long blast holes have already been drilled at one operation. The aim of the method is to decrease the construction cost and period in mining and tunnelling projects as well as to increase the blasting efficiency. Several numerical analyses were conducted by using the Euler-Lagrange solver on ANSYS AUTODYN to identify the effects of the suggested method on the blasting results in underground excavations. The overall performance of the suggested method was also compared to an ordinary blasting method. The analysis model was comprised of the Eulerian parts (explosive, air, and stemming materials) and the Lagrangian parts (rock material). As a result, it was found that, owing to the air decks formed in the bottom parts of the long blast holes, the first round of the suggested method presented a higher shock pressure and particle velocities in the vicinity of the blast holes compared to the ordinary blasting method.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.2
• /
• pp.175-184
• /
• 2019

This paper presents a modeling prototype that optimizes construction processes implementing information communication technology (ICT). Using "IAMB", each and every actual steps of the construction process may be defined visually and explicitly by elaborating ICT to improve productivity and management efficiency. It contributes to identify the features on what parts of construction task are covered by ICT, and the effects of ICT on process performance. After analyzing 10 real project cases, ICT application types are classified into four categories according to ICT type, job functions that ICT applied, and the project phase in which ICT used. As a reuslt, it was confirmed that the positive outcomes on the construction process were beneficial to mostly the general contractors and mainly obtained by automated information processing, external consignment and consistent information use. Negative effects, which were occurred by mainly manual manipulation and duplication of information handling, were accrued to general contractors minimally, but to subcontractors maximally. Expert focus group commends that several important issues should be considered when implementing ICT.

• Journal of agricultural medicine and community health
• /
• v.45 no.4
• /
• pp.194-207
• /
• 2020

Purpose: The purpose of this study is to develop and evaluate the curriculum, that was the continuing professional development program, for cultivating physician's competencies in public health. Methods: This study was conducted through in-depth interview and survey in the frame of ADDIE, from 2 May to 30 June in 2019. Participants were 7 physicians by in-depth interview and Respondents were 46 physicians worked in public health by survey. Results: The results were analyzed and described in the frame of ADDIE model. In the stage of Analysis, physician's core competencies in public health was presented to practical education, management of organization and labor force, communication with community, and director' role of public health center in the community as core competencies by in-depth interview. The skill - knowledge-attitude competencies were highest in order in the survey for placing priority (by Borich score) of 29 core competencies. In design stage, the educational objective of curriculum was established, that is to develop the competencies of knowledge, skills, and attitude needed for physician of public health in 21th century. In development and implementation stage, it is important to decide to lecturer, to get in advance educational materials to do the maintenance and management of curriculum. In the stage of evaluation, the educational satisfaction was high on the whole and educational effect was statistically significant. Conclusions: This study was an initial study of Korean doctors, and it aims to pursue competency-based education as a continuing professional development (CPD) beyond continuing medical education (CME) including knowledge, skills, and attitudes.

• Food Science and Industry
• /
• v.54 no.2
• /
• pp.93-101
• /
• 2021

Hazard Analysis Critical Control Point (HACCP) systems were developed to ensure a high level of food safety and reduced risk of foodborne illness. This paper focuses on significant issues associated with the implementation of HACCP; it provides an overview on recent literature. The structure of the paper follows six groupings of issues in the international literature of HACCP: (1) comparative studies and unification plan between HACCP and other food safety regulations; (2) verification of the HACCP system's effectiveness in improving food safety; (3) establishment of critical control point (CCP) for various foods HACCP model development; (4) expansion of HACCP application in the various fields and small businesses;(5) the impacts of HACCP on consumer's preferences and firms' financial performance in food industry; (6) HACCP and technological changes. The paper concludes with some suggestions for the future research in order to promote safe food supply chain for global customers.