• 동력기계공학회지
• /
• 제22권1호
• /
• pp.18-24
• /
• 2018

This paper focuses on systematic design about the membership ranges of the main design factors such as control error, control error rate, and sampling time for the fuzzy logic control of the variable speed drive refrigeration cycle. The upper and the lowest limit of the membership ranges are set up from the data of static characteristics obtained by experiments. Three kinds of membership ranges on the control error and the control error rate are tested by experiments. Especially, an effect of sampling time on control performance is also investigated in the same way. Experimental data showed the control error rate and the sampling time strongly effected on the control performance of the refrigeration cycle with a variable speed drive.

• 대한산업공학회지
• /
• 제28권3호
• /
• pp.240-246
• /
• 2002

In this paper, economic screening procedures with dichotomous performance variable T and continuous screening variable X are considered when the rejected items are reprocessed. Two models are considered; normal and logistic models. It is assumed that X given T is normally distributed in the normal model, and P(T=1|X=x) is given by a logistic function in the logistic model. Profit models are constructed which involve four price/cost components; selling price, cost from an accepted nonconforming item, and reprocessing and inspection costs. Methods of finding the optimal screening procedures are presented and numerical examples are given.

• 전력전자학회논문지
• /
• 제17권1호
• /
• pp.57-66
• /
• 2012

This paper proposes a performance improvement of grid-connected inverter system using sliding-mode based direct power control with a variable gain. The proposed control method determine variable gain of PI controller by using modeling at direct power control (DPC) applied to space vector modulation method. Also, this method use sliding-mode control to maintain excellent dynamic response of character of direct power control (DPC). The validity of the proposed algorithm are verified by simulations and experiments.

• Industrial Engineering and Management Systems
• /
• 제14권2호
• /
• pp.210-219
• /
• 2015

A classification task requires an exponentially growing amount of computation time and number of observations as the variable dimensionality increases. Thus, reducing the dimensionality of the data is essential when the number of observations is limited. Often, dimensionality reduction or feature selection leads to better classification performance than using the whole number of features. In this paper, we study the possibility of utilizing the Markov blanket discovery algorithm as a new feature selection method. The Markov blanket of a target variable is the minimal variable set for explaining the target variable on the basis of conditional independence of all the variables to be connected in a Bayesian network. We apply several Markov blanket discovery algorithms to some high-dimensional categorical and continuous data sets, and compare their classification performance with other feature selection methods using well-known classifiers.

• 한국정밀공학회지
• /
• 제21권9호
• /
• pp.48-55
• /
• 2004

This study presents a genetic algorithm-based method fur optimizing control parameters in the pressure control of electro-hydraulic pump with variable displacement. Genetic algorithms are general-purpose optimization methods based on natural evolution and genetics and search the optimal control parameters maximizing a measure that evaluates the performance of a system. Four control gains of the PI-PD cascade controller for an electro-hydraulic pressure control system are optimized using a genetic algorithm in the experiment. Optimized gains are confirmed by inspecting the fitness distribution which represents system performance in gain spaces. It is shown that genetic algorithm is an efficient scheme in optimizing control parameters of the pressure control of electro-hydraulic pump with variable displacement.

• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.763-774
• /
• 2015

This study investigates the inherent influence of a DC-link voltage controller on both DC-link voltage control and the compensation performance of a three-phase, four-wire shunt active power filter (APF). A nonlinear variable-parameter DC-link voltage controller is proposed to satisfy both the dynamic characteristic of DC-link voltage control and steady-state compensation performance. Unlike in the conventional fixed-parameter controller, the parameters in the proposed controller vary according to the difference between the actual and the reference DC-link voltages. The design procedures for the nonlinear voltage controller with variable parameters are determined and analyzed so that the proposed voltage controller can be designed accordingly. Representative simulation and experimental results for the three-phase, four-wire, center-spilt shunt APF verify the analysis findings, as well as the feasibility and effectiveness of the proposed DC-link voltage controller.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1345-1348
• /
• 2005

We designed the compound CVT (Continuously Variable Transmissions) by combining power circulation mode CVT and power split mode CVT, which have been proposed for connecting 2K-H I differential gear to the V- belt type CVU (Continuously Variable Unit), as an input coupled type. With the designed compound CVT, we carried out theoretical analysis and performance experiments. We proved that the compound CVT had a better performance than either of the power circulation mode or power split mode.

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.170-178
• /
• 2004

Continuously variable transmission (CVT) mechanisms considered here are input coupled types that combine the functions of a 2K-H II type differential gear and a V-belt type continuously variable unit (CVU). For the 8 different mechanisms, 4 of them are power-circulation modes while the other 4 are power-split modes, various performance analysis (speed ratios, power flows, divisions of power transmission in a differential gear and a CVU, and theoretical efficiencies) are performed to vary design parameters. Experimental studies are executed to validate fundamental relations (speed ratios, power flows, efficiencies, occurrence of geared neutral). Some useful characteristics associated with performance also are discussed in the mechanisms.

• 한국정보통신학회논문지
• /
• 제9권7호
• /
• pp.1473-1478
• /
• 2005

본 논문에서는 가면 전송율을 갖는 UWB 통신 시스템을 제안하고 다수의 무선 기기가 유동적으로 이동하는 피코넷 환경에서 다중접속 간섭 및 전송율에 따른 시스템 성능을 분석하였다. 또한, 전송 품질을 향상시키기 위하여 Truncated Type-II Hyabrid ARQ 기법을 적용하여 불완전 채널 환경에서의 시스템 성능을 평가하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.321-332
• /
• 2004

The purpose of this research is to introduce the concept of "relationship formation factors" in inter-firm relations and to empirically demonstrate that they are effective in improving the relationship results by means of anmediating variable. Therefore, the basic model of this study consists of the independent, mediating, and dependent variables. First, the independent variable, that is, the relationship formation factors, is further classified into three components： transactional, relational, environmental characteristics. Then, the study empirically examines how each of the three components influences the dependent variable, that is, the business performance(Load Factor), by way of the mediating variables, that is, trust and relationship commitment.