• 한국보건간호학회지
• /
• 제32권3호
• /
• pp.400-410
• /
• 2018

Purpose: This study was conducted in order to investigate the relations between knowledge, awareness, and performance of standard precautions among nursing college students. Methods: The participants were 167 students in D city. Data were collected from April 16, 2018 to May 4, 2018 using a questionnaire. Data analysis was performed using the SPSS/WIN program 22.0 using t-test, Pearson's correlation analysis, and Multiple linear regression analysis. Results: Mean knowledge, awareness, and performance of standard precaution scores 19.02, 4.77 and 4.75 awareness was found to positively affect the performance of standard precautiosns. Conclusion: To improve hospital infection control, a customized infection control program should be developed for nursing students by surveying level of knowledge of standard precautions, to select risk groups and to gradually improve knowledge, awareness and performance.

• 한국융합학회논문지
• /
• 제10권4호
• /
• pp.265-275
• /
• 2019

본 연구는 간호대학생의 환자안전에 대한 태도, 임파원먼트, 표준주의지침 인지도 및 수행도 간의 관련성을 파악하고, 표준주의지침 수행도의 영향요인을 규명하고자 시도되었다. 연구대상자는 J시 소재 일 간호대학 재학생 185명이었다. 자료수집은 2018년 9월 10일에서 21일까지 진행되었으며, 수집된 자료는 SPSS Statistics 22.0 프로그램을 이용하여 Independent t-test, ANOVA, Pearson's correlation coefficient, stepwise multiple regression으로 분석하였다. 다중회귀분석 결과 표준주의지침 수행도의 영향요인은 인지도, 임파워먼트, 환자안전행사 참여로 나타났으며 수행도를 51.0% 설명하였다. 이에 간호대학생의 의료관련감염 관리를 위한 표준주의지침 수행도를 향상시키기 위해서는 인지도를 높이고 임파워먼트를 향상시킬 수 있는 다양한 융합적 교육프로그램의 적용과 환자안전행사에 간호대학생이 적극 참여할 수 있도록 하는 방안을 모색하여야 할 것이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.174-179
• /
• 2004

To maintain design-knowledge database and manage configuration for requirement of performance test and safety standard of High Speed Railroad, It is established that managment system of performance test and safety standard and then constructed that design-knowledge database and documented a performance test and safety specification for supporting performance test and safety system using computer-aided tool.

• 한국BIM학회 논문집
• /
• 제10권4호
• /
• pp.50-59
• /
• 2020

Recently, the government has actively promoted the introduction of BIM at the national level to improve the efficiency and productivity of the construction industry, and private interest in the application of BIM has also increased. However, despite the large amount of references and information, not much research has been done in quantitative ways to accurately measure the performance of BIM projects. The purpose of this study is to review performance measurement cases using ROI, investment effect analysis, and queue model analysis using domestic and overseas BIM guideline research and to present standard templates that can quantitatively measure BIM performance records according to domestic conditions based on this. Performance measurement trends and cases according to the application of BIM were analyzed, and nine quantification elements were derived from this, and based on this, a performance measurement data collection template at the BIM life cycle stage was prepared. Detailed items and contents were prepared for the nine quantification elements, and the final template consisted of a total of 43 questions, divided into the entire stage (15), the beginning (8), the middle (8), and the latter (12) areas. It is expected that by using the standard template of railway BIM performance records developed in this study, the BIM design stage will be diagnosed and the deficiencies will be supplemented, which will be the basic data for measuring actual quantitative performance in all life cycle performance of future BIM projects.

• 한국인터넷방송통신학회논문지
• /
• 제10권4호
• /
• pp.199-204
• /
• 2010

최근 전자 정보 통신 기술의 발전으로 개개인이 요구하는 정보의 전송량도 증가하고 있다. 특히 CATV의 전송량 증가에 따른 전송 성능의 향상이 불가피하다. 따라서 본 논문에서는 DOCSIS(Data-Over-Cable Service Interface Specifications) 2.0 요구 규격을 만족하는 CATV 전송 시스템에서 Bit Error Rate(BER)에 따른 최적의 Signal to Noise Ratio(SNR) 성능 요구 특성을 얻기 위한 위상 잡음 특성을 분석하였다. 특히 개발된 시뮬레이터를 이용하여 CATV 전송 시스템 위상 잡음 특성 요구 규격을 만족하는 Phase Locked Loop(PLL) 구성 요소 파라미터 값들을 도출하였다. 제시된 방법은 향후 초고속 CATV 전송 시스템의 위상잡음 관련 성능 요구 규격 도출에 이용될 수 있다.

• 한국위성정보통신학회논문지
• /
• 제5권1호
• /
• pp.1-5
• /
• 2010

최근 전자 정보 통신 기술의 발전으로 개개인이 요구하는 정보의 전송량도 증가하고 있다. 특히 CATV의 전송량 증가에 따른 전송 성능의 향상이 불가피하다. 따라서 본 논문에서는 DOCSIS(Data-Over-Cable Service Interface Specifications) 2.0 요구 규격을 만족하는 CATV 전송 시스템에서 Bit Error Rate(BER)에 따른 최적의 Signal to Noise Ratio(SNR) 성능 요구 특성을 얻기 위한 위상 잡음 특성을 분석하였다. 특히 개발된 시뮬레이터를 이용하여 CATV 전송 시스템 위상 잡음 특성 요구 규격을 만족하는 Phase Locked Loop(PLL) 구성 요소 파라미터 값들을 도출하였다. 제시된 방법은 향후 초고속 CATV 전송 시스템의 위상잡음 관련 성능 요구 규격도출에 이용될 수 있다.

• 한국가시화정보학회지
• /
• 제4권2호
• /
• pp.37-43
• /
• 2006

An experimental apparatus for PIV performance evaluation has been developed. Stardard uncertainty of a two-dimensional cross-correlation PIV system was investigated based upon the standard experimental apparatus, which was devised to model the rigid body rotating flows. For the systematic analysis of the uncertainty introduced by each component (algorithm, CCD camera, frame grabber) of the PIV system, standard images are fed into the component independently. The standard experiments show that 53% of the uncertainty in the present PIV system results from the frame grabber but the errors from the algorithm and digital camera are ignorable.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.90-95
• /
• 2015

This paper describes IEC 61727 standard of Photovoltaic (PV) systems -Characteristics of the utility interface. IEC 61727 standard tests include utility compatibility and personnel safety and equipment protection of PV inverter performance functions. Especially utility compatibility part includes test items of 1) voltage, current and frequency, 2) normal voltage operating range, 3) flicker, 4) DC injection, 5) normal frequency operating range, 6) harmonics and 7) waveform distortion, 8) power factor of PV inverter. Also personnel safety and equipment protection part includes test items 1)loss of utility voltage, 2)over/under voltage and frequency, 3)Islanding protection, 4)response to utility recovery, 5)earthing, 6)short circuit protection, 7)Isolation and switching of PV inverter. In this paper, each item of IEC 61727 standard test is studied and analyzed and finally full tested by PV inverter performance function.

• 대한산업공학회지
• /
• 제17권2호
• /
• pp.75-86
• /
• 1991

This paper presents a methodology to enable the tolerances on mating parts of an assembly to be specified and be compatible to the precision of an assembly robot so as to achieve maximum system performance. The measure of performance is defined as the Probability of Successful Assembly (PSA). A typical loose fastener assembly, usually called peg-in-a-hole is investigated. The Geometric Tolerancing System is adopted to represent position tolerances of mating parts. Two models are presented by considering modifiers on a position tolerance, Regardless of Feature Size (RFS) and Maximum Material Condition (MMC). Using these models, it is analyzed how the Standard Limits and Fits recommended by ANSI influence the performance of an assembly robot. For this analysis, the Standard Limits and Fits are transformed to the representation scheme of the Geometric Tolerancing System. Due to low PSAs when the Standard Limits and Fits are taken into account, the effect of chamfers around a hole is also analyzed.

• 대한임베디드공학회논문지
• /
• 제6권3호
• /
• pp.139-148
• /
• 2011

As the architecture of automotive software is complicated and LOC of software increases, there is an increasing demand for standard operating system. OSEK/VDX defines an industry standard for automotive operating system and middleware. This paper introduces an implementation of RTOS(OSCAR-OSEK) based on OSEK/VDX standard. For better speed of scheduling, we suggest a new method for ready queue implementation considering the characteristic of automotive application software. Also we introduce a method for improving the portability of RTOS on various MCUs. And, we show OSCAR-OSEK implementation and performance test results.