• 약학회지
• /
• 제42권2호
• /
• pp.149-152
• /
• 1998

A high performance liquid chromatographic method was developed for the determination of DA-6034 in biological fluids using internal standard. Plasma containing DA-6034 and inter nal standard was extracted by liquid-liquid extraction at an acidic pH. After evaporation of the organic layer, the drug and internal standard were reconstituted with mobile phase and injected into the column. They were separated by high performance liquid chromatography on inertsil ODS II column at 334 nm. The detection limit of DA-6034 in plasma was 0.02 ${\mu}$g/ml. In this method, the range of recovery and coefficients of variation were 96-110% and 0.40-3.78%, respectively. There was no interference from endogenous substances. Urine and bile were analysed using the deproteinization method and the detection limit of DA-6034 was 1${\mu}$g/l.

• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.117-130
• /
• 1999

In this paper, the performance of data communication function of military radio equipment P-999K is analyzed based on the standard CSMA/CA protocol which is DFWMAC standard protocol done by IEEE802.11 work group. Basic three standard protocols, i.e. Basic CSMA/CA, Stop & Wait ARQ and 4-Way Handshake CSMA/CA protocols are analyzed and compared with each other under the hidden terminal environment. The computer simulation is also done by using SIMSCRIPT II.5 which is popular software tool for an independent processing. The results show that p-persistent(with p=0.3) CSMA scheme is superior to non-persistent CSMA scheme with non-hidden terminal condition, but the performances of both schemes are almost same with hidden terminal situation. And the results of computer simulations are also showed that Basic CSMA/CA protocol is superior to the other protocols when the ratio of hidden terminals is below 10 % of total user population, however, with the above 20% hidden terminals environment and the higher offered traffic conditions the 4-Way Handshake CSMA/CA protocol shows the most superior performance.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.143-147
• /
• 2009

Graduates from engineering colleges are demanded to have been acquired some abilities and qualities during their undergraduate years through the standard of the so-called "programmed learning results and evaluation" This paper aims at analyzing the learning results evaluation tool for graduates from the architectural engineering department through the examples of the colleges with engineering accreditation in Korea, and suggesting a more appropriate programmed learning result evaluation tool. The basic theories on programmed learning results were studied, and then the previous study examples were researched. The study objects were limited to the fourteen colleges which offered the examples of the learning results evaluation tools of the colleges with engineering accreditation in Korea. Types and the present situation of those evaluation tools were analyzed. In addition, the proposals for the evaluation tool of programmed learning results and the performance standard were suggested for those with an engineering accreditation, based on the case study of the performance standards of each college with an engineering accreditation. The study results showed that much more national research needs to be conducted to clarify the standards of selecting an evaluation tool and a performance standard appropriate for the level of each college so that it can make a proper proposal.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2016년도 학술발표회
• /
• pp.578-578
• /
• 2016

In the past decade, many countries developed varies promising theories, methodologies and technologies for water resources management, such as Smart Water in Korea, eWater in Australia, Intelligent Water in Untied States, and Internet of Water in China. It is no exaggeration to say that Smart Water Management(SWM) will have a major role to play in addressing the global water challenges in the background of climate change, population growth and rapid urbanization. As a result, we can see major shifts taking place in the structure of the water industry, with a need for new approaches, skills, and water management policies. All these point towards a brighter future for the smart water sector and a new water paradigm, with applications and potential throughout the water cycle. However, each countries have their technology and industry standard system which may swift similar innovation and technology into different channels. In that sense, developing a common performance index and standard docking adapter for assessing Smart Water Management Initiatives(SWMI) is crucial for drawing a linkage of SWMI and SWMs to a way to implement advanced technology across Asia and Pacific. The performance index and standard docking adapter will facilitate quantitative and qualitative effects of utilized SWM techniques.

• 정보관리학회지
• /
• 제28권4호
• /
• pp.243-261
• /
• 2011

국가적 차원의 연구 성과평가와 연구정보서비스의 연계를 위한 프레임워크를 메타데이터 표현과 교환의 두 가지 측면에서 모색하였다. 이를 위해 과학기술분야 연구개발사업을 대상으로 국가적 차원의 연구성과평가 메타데이터의 기능적 요건을 도출하였고, 이에 기초하여 주요 기능별로 국제적인 표준의 적용 방안을 제안하였다. 또한 웹 아키텍처 상에서 연구정보를 재사용 및 교환할 수 있는 국제표준으로서 OAI-ORE에 기반하여 성과평가 메타데이터를 표현 및 연계하기 위한 구현 방안과 사례를 제시하였다.

• 한국전자거래학회지
• /
• 제23권3호
• /
• pp.1-12
• /
• 2018

혼합 중요도 시스템은 중요도가 다른 컴포넌트의 조합으로 이루어져 있다. 최근 자동차 시스템과 항공기 시스템에서 사용되는 ISO 26262와 DO-178B 표준에서는 컴포넌트를 중요도에 따라 분류하고 있다. 기존 혼합 중요도 시스템 연구에서는 시스템 모드를 통해서, 효율적이면서 안전한 스케줄링을 추구했다. 이러한 연구의 단점은 고중요도 모드에서 저중요도 작업의 성능저하이다. 이러한 문제를 개선하고자 작업별 중요도 모드를 도입하여 저중요도 작업의 성능을 개선하고 확률적 성능 지표를 설계했다. 시뮬레이션을 통해서 기존 연구 대비 성능 향상 효과를 보였다.

• 한국경영공학회지
• /
• 제23권4호
• /
• pp.73-86
• /
• 2018

Most electric products produced during the manufacturing process are produced after design and mass production under a given control standard. In particular, the development phase should present the criteria for the production process by setting appropriate limits based on the performance being targeted. Even if the standard of performance is set considering the performance of the process, measuring the performance of the product after actual production results will cause nonconformities with the expected results. Among the performance of electrical products, Energy standards represented by energy consumption efficiency continue to be of importance, and are mandatory standards that correspond to national standards in most countries. Therefore, statistical quality control of these standards shall basically have a large number of test equipment for each product, ensure sufficient test time and continuous sampling of product samples. In the end, companies that produce and sell electric appliances are striving to control mass production at a great cost, but this is not acceptable. This study presents basic characteristics of the energy efficiency of electrical products and proposes and conducts a case study on statistical production control methods for performance variation across products under the standards about domestic and international regulations.

• 수산해양기술연구
• /
• 제59권2호
• /
• pp.110-116
• /
• 2023

In this study, samples of sea anchor canopy cloth mainly used in Korean jigging fishing vessels were collected and tested for performance evaluation. The canopy cloth of sea anchor is a basic element of form composition that is known to have the greatest influence on anchor performance. In order to evaluate the performance of sea anchor canopy cloth, five types of samples were tested for new metric count, tensile strength, water vapour transmission rate and drying speed according to the national standard (KS), and some correlations were identified. As a result of the test, the new metric count of cloths was 335.5-443.4 denier in warp and 217-447.6 denier in weft, and the minimum tensile strength was 860 N in warp direction and 430 N in weft direction. The apparent number and tensile strength of cloth were proportional, the water vapour transmission rate of the sample was 206.8 g/m²h, and the drying speed was 90-100 min. This study partially confirmed the performance evaluation based on speculation by the standard test method, and further research is needed on the clear relationship between the research results and the performance of the sea anchor.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.15-19
• /
• 2001

Electronic navigation system onboard have have been developed with recent technology based on new concept such as electronic chart date. The most valuable system of revolution in electronic navigation equipment is ECDIS, which have been developed in order to reduce work load of mariner and give an integrated information by simple means, especially to improve the safety of ship's navigation. In order to be sure the function of ECDIS is satisfied, The international standard have regulated the performance in the standard, so ECDIS should be type approved by the marine equipment authority of each government. There are three basic documents, IEC61174, IEC61162, IEC60945 issued by IMO(International Maritime Organization) which should be used for type approval system of each authority. IEC 61174 include the method of test and required results for operational and functional performance of test equipment. IEC61162 is for sensor interface and IEC60945 is related to the test of environmental condition for general marine radiocommunication equipment. In this paper, we investigate international standard in detail and current approval system of general marine equipment. After that, we present the possible structure of type approval of ECDIS and important considerations of approval system such that ECDIS should be tested as one system not be separated between S/W and H/W.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.121-126
• /
• 2009

This study analyzed the standard school's energy usage and patterns as the zero-energy goal of primary school building, and proposed the energy reduction process of school building using energy analysis computing simulation tool. As a analysis simulation tool, Visual DOE 4.0 is used. For analysis of actual energy usage, selected primary school that is standard in the nation's energy consumption. Standard of the school's energy consumption analysis were devided into electric and gas energy. Input parameters of the simulation program based on the literature material and field survey material. after, but it was calibrated to comparison with the standard school's energy consumption. Finally, its energy usage analyzed by component and made the priority order of energy saving. Applied energy saving technologies are envelopment insulation, high efficiency lighting, high performance HAVC system and used active equipment system of solar collector and photovoltaic generation for additional savings.