• International Journal of Control, Automation, and Systems
• /
• v.6 no.3
• /
• pp.327-338
• /
• 2008

A fault tolerant control system design technique has been proposed and analyzed for managing performance degradation in the presence of multiple faults in actuators. The method is based on a control structure with a model reference reconfigurable control design in an inner loop and command input adjustment in an outer loop. The reduced dynamic performance requirements in the presence of different actuator faults are accounted for through different performance reduced (degraded) reference models. The degraded steady-state performances are governed by the reduced levels of command input. The reconfigurable controller is designed on-line automatically in an explicit model reference control framework so that the dynamics of the closed-loop system follow that of the performance reduced reference model under each fault condition. The reduced command input level is determined to prevent potential actuator saturation. The proposed method has been evaluated and analyzed using an aircraft example against actuator faults subject to constraints on the magnitude and slew-rate of actuators.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.4
• /
• pp.130-140
• /
• 2000

In this paper the reference model following control(RMFC) scheme through the optimal control theory is investigated for the independent rear wheel steering(IRWS) vehicle. RMFC vehicle follows the dynamic performance of a virtual vehicle as a reference model deisgned in the controller. Linear vehicle model of two degres-of-freedom is used to derive control scheme which is applied to full vehicle for evaluating handling performances. And 4WS vehicle through RMFC is compared to the conventional 2WS vehicle and 4WS vehicle in the J-turn test. The RMFC logic is also extended to IRWS vehicle, IRWS with RMFC shows not only the excellent handling performance but salso some advantages in terms of the directional stability and responsiveness from the simulation results.

• International Journal of Aeronautical and Space Sciences
• /
• v.8 no.1
• /
• pp.79-86
• /
• 2007

In this paper, an adaptive control algorithm using system identification is proposed for an aircraft fault tolerant control system. A discrete state-space system is reformulated to be the ARX model which has the advantage in handing variable structure systems. Discrete model reference adaptive control is used to make the output of fault system follow the output of reference model. To validate the performance of the proposed control scheme, numerical simulations are performed for the high performance aircraft with control surface damage.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.4
• /
• pp.297-306
• /
• 2007

Model reference control is control method such that overall response of a plant plus controller approaches that of a given reference model. The reference model provides desired trajectory the plant should follow. There are many kinds of control methods in MRC. However, this paper focuses on Model Reference Sliding Mode Control. The plant of these controls is an uncertain and linear system varying in time, of second order, and with SISO. In this paper, a design scheme of reference model is proposed for MRSMC. The scheme determines reference model based on the information on bounded control inputs, reference inputs and system parameters. It is used to choose a Fixed Reference Model in the process of controller design, to update Variable Reference Model when stepwise reference inputs change and to update Instant Reference Model at every sampling time. The simulation results show that the proposed method yields better control performance than the conventional MRC subject to the stepwise reference input when applied to the position control system for motor system.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.72-78
• /
• 2006

The paper proposes reference model error feedback control scheme for motion control system with hard non-linear components as like saturation and dead-zone in plant input part. Additionally, the plant has the system uncertainty effected by plant model parameter deviation and disturbance. The control algorithm uses the reference model to apply additional feedback loop with the error between reference model output and actual output effected by disturbance and non-linear components. And the stability evaluation based on Popov stability and controller design method are formulated to be performed. The effectiveness of the proposed scheme is examined by simulations. The results are proven by reasonable performances following reference model responses with good disturbance rejection performance without over-tuning of controller.

• Proceedings of the KIEE Conference
• /
• 2001.07e
• /
• pp.141-145
• /
• 2001

In this paper, model reference PID genetic controller was proposed in order to overcome the difficulty of reflecting control performance required in the overall control system and defects of the adaptation performance in the PID genetic controller. The proposed controller comprised Inner feedback loop consisting of the PID controller and plant, and outer loop consisting of an genetic algorithm which was designed for tuning a parameter of the controller. A reference model was used for design criteria of a PID controller which characterizes and quantizes the control performance required in the overall control system. Tuning parameter of the controller is performed by the genetic algorithm. The performance of proposed algorithm was verified through experiment for the DC servo motor.

• Journal of information and communication convergence engineering
• /
• v.21 no.4
• /
• pp.351-358
• /
• 2023

This study designed a model-based Vehicle Control Unit (VCU) software for electric vehicles. Electric vehicles have transitioned from conventional powertrains (e.g., engines and transmissions) to electric powertrains. The primary role of the VCU is to determine the optimal torque for driving control. This decision is based on the driver's power request and current road conditions. The determined torque is then transmitted to the electric drive system, which includes motors and controllers. The VCU employs an Artificial Neural Network (ANN) and calibrated reference torque to enhance the electric vehicle's performance. The designed VCU software further refines the final reference torque by comparing the control logic with the torque calculation functions and ANN-generated reference torque. Vehicle tests confirmed the effective optimization of vehicle performance using the model-based VCU software, which includes an ANN.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1423-1426
• /
• 2007

The goal of this research is to develop and apply the integrational model for the pan evaporation and the alfalfa reference evapotranspiration in Republic of Korea. Since the observed data of the alfalfa reference evapotranspiration using lysimeter have not been measured for a long time in Republic of Korea, PM method is used to assume and estimate the observed alfalfa reference evapotranspiration. The integrational model consists of staochastics and neural networks processes respectively. The stochastics process is applied to extend for the short-term monthly pan evaporation and alfalfa reference evapotranspiration. The extended data of the monthly pan evaporation and alfalfa reference evapotranspiration is used to evaluate for the training performance. For the neural networks process, the generalized regression neural networks model(GRNNM) is applied to evaluate for the testing performance using the observed data respectively. From this research, we evaluate the impact of the limited climatical variables on the accuracy of the integrational operation of stochastics and neural networks processes. We should, furthermore, construct the credible data of the pan evaporation and the alfalfa reference evapotranspiration, and suggest the reference data for irrigation and drainage networks system in Republic of Korea.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1069-1072
• /
• 1996

In modern control engineering, the model following system is a typical method. The model following system's performance is due to algorithm of control law, accuracy of modeling to the plant, and dynamics of the reference model. But the determination of the reference model depends on knowledge of an expert. Using an expert system, the determination method of the reference model was proposed in this paper. So, the reference model can be selected by user who has no Knowledge of dynamics and parameters.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.329-331
• /
• 1993

A new RMFSOC(Reference Model Following Self-Organizing Controller) is proposed. It is composed by adding the reference model and decision rule to the Mamdani's SOC. The reference model is introduced to explicitly specify the control performance. The self-organizing level of the RMFSOC organizes the control rule which makes the process output follow the reference output generated by the reference model. In order to avoid unnecessary control rule modification, a decision rule is also introduced to determine whether the control rule modification is needed or not.